CJM: Ultimate 370z Fuel Pump Thread

[phunk]

According to that instruction image, it says they supplied the drill bits. So you could ignore the incorrect description of 7/16 and use the supplied bit, assuming they didnt actually send you a 7/16 which is almost a half inch diameter and obviously too large.

[Electrify904]

So I'm installing the S1.SE system in my Z before installing my Boosted Performance turbo kit.

I have a 2016 Nismo and it appears they have updated the stock top hat and wiring. Unfortunately the wiring is different than what's in the fuel pump tech guide.

The fuel temp sensor has two yellow wires instead of a yellow and black so the two black wires aren't together like the guide shows.




I do have the DW fuel relay kit. Are there any install instructions or wiring guide for this other than the universal instructions from Deatschewerks?

So I assume I'm only supposed to use the sensor wires from the stock wiring harness? Is there a diagram showing what colors do what on the stock external connector? Mine looks totally different than whats in the guide.