I drilled mine out to 101-thousandths. Have a pic if you want to see?

It is a little plastic venturi that attaches to the bottom of the fuel pump module. Unfortunately this little guy is not available purchased separately... so there is no going back if you went back to stock.

To put a stock fuel pump back in there with the oversized venturi would weaken the over-tank siphon and promote fuel starvation.

COSMO has a picture as I recently had him do it for his pump. I will also try and get this added to my fuel pump thread quickly.

Sure. Send it my way

Must have deleted it off of my phone but Charles has a pretty good pick of it.. Sorry

Work in progress right now: http://www.the370z.com/2784717-post6.html

Should have it done in the next 30 min.

Think that's the wrong link. You just linked to some baby dying in street race

LOL i dont know man, the link works for me. I havent seen anything about the street racing baby though.

Here is the entire thread I am working on it in. http://www.the370z.com/forced-induct...mp-thread.html

Maybe my phone is crackheaded

Now that I quoted it, the quoted link works fine. I'm done with android, guess apple gets my money at upgrade time

Got that section done for ya!

Sweet. Wish I'd have done that when the pump was put of the tank

The other day a friend noticed I didn't have any fluid in my gauge. Started looking at it and the rubber cap went missing, gauge was still reading pressure. I called CJM talked with them for a bit and they are getting me another sent out.

Still am happy with an awesome product!

Updated and added installation instructions: CLICK HERE

Any chance a mod can move this thread to the Engine and Drivetrain section?

installed :yum:

http://www.the370z.com/members/kukpe...122-054545.jpg

Wow, I've got to see the rest of your engine bay!

Mind if I steal that photo for the website page?

no problem :tiphat:

Hey Jwick - I too am getting similar numbers to you, on my gauge.

Hey Phunk,

Does this fit on the stillen kit? if so ill buy one.

I dont have any confirmation on that, but I believe the answer is a "sort of". I think that tweaking/bending of the fuel inlet tube is probably required to get everything in that area to work together.

ill order one and try it, I think they'll be lots of room when BP fabs up a Air/Air kit for me.

The answer is yes it will fit. It's not a bolt on affair but it will fit and look damn good!

Links updated to new website.

Added coupon "THE370ZGAUGE" that will make US shipping free.

EDIT: Code is no longer valid

I just ordered one and now I see this!:shakes head:

Either way, looking forward to getting it on the car! :tup:

Shipping charges refunded.

The order shipped earlier today and you should have tracking by email.

Thanks!

You the man! I'll be ordering your S1 system soon for my E85 conversion!

Thanks! :tup:

Clearing out inventory on these! $28 + 13.95 shipping (continental US) for the fitting kit. +$25.00 for the optional mini pressure gauge.

Updated photos attached.

Sale runs until inventory on the part is sold out.

Thanks.

CJM Fuel Tap NPT, Nissan 2-Bolt | CJ Motorsports

Got one on order, looking forward to it, great price!

Fast shipping. Got it yesterday, gonna install this weekend. Thanks Phunk!

Just ordered this as well but I did not see where to put in coupon code.........

These are on clearance anyway, so no coupon code is valid or required. They are just $28 + 13.95 flat rate shipping in USA.

Thanks!

OK cool. Glad I could get one before they sell out...:rofl2:..........B.P. Kit will be here soon...:driving:

Already shipped!

Shipped within an hour of placing my order. Very fast shipping.....:tiphat:......and not to mention great price

Guys monitoring fuel pressure is a must with a boosted application and this is the easiest solution I've seen yet. Not to mention a great price from a quality vendor. :tup:

Thanks for the info on this jwick.....:tiphat:

Even if you're not boosted. It's great to help figuring out if you have fueling issues or not. :tup:

No argument there :tup:

Package received already.....:happydance:......... Now that is some fast shipping and packaged perfectly........ Thanks phunk

phunk, do you ship to APO addresses? I was interested in purchasing one of these however when I went to checkout I was able set all of my shipping/billing info just fine but the website only gave me options for UPS shipping (needs to be shipped through USPS)...