Vq35hr 20psi stillen blower

Pro4Jackster · 05-22-2014, 09:00 AM

I have given up on the Stillen Supercharger. It got to the point where we were going to have to redesign most of the original kit to make anymore power (belt routing, charge pipe, relocate MAFs, new air filter and intake pipe, bigger heat exchanger, separate IAT sensor, etc). And since we are already spinning the SI in the red at 56K rpms, I don't want to spend any more money on this setup. I just sold the kit to a local guy and it's getting installed right now.

My motor was finished a couple of months ago, and now has just over 1000 miles on it. We ended up going with 10:1 Arias pistons and Carrillo rods. Ron took apart and cleaned the heads up. So the motor is ready for a lot more than this kit can put out. So it's time for a JTran Motorsports Low-Mount Single Turbo.

jwick · 05-22-2014, 09:11 AM

Quote:

Originally Posted by Pro4Jackster

I have given up on the Stillen Supercharger. It got to the point where we were going to have to redesign most of the original kit to make anymore power (belt routing, charge pipe, relocate MAFs, new air filter and intake pipe, bigger heat exchanger, separate IAT sensor, etc). And since we are already spinning the SI in the red at 56K rpms, I don't want to spend any more money on this setup. I just sold the kit to a local guy and it's getting installed right now.

My motor was finished a couple of months ago, and now has just over 1000 miles on it. We ended up going with 10:1 Arias pistons and Carrillo rods. Ron took apart and cleaned the heads up. So the motor is ready for a lot more than this kit can put out. So it's time for a JTran Motorsports Low-Mount Single Turbo.

Nice decision. What turbo you selecting? I'm running the BP PT6266 Twin Scroll. Same size as JTran put in that last Nismo he built but with a divided housing.

1slow370 · 05-22-2014, 11:32 AM

Quote:

Originally Posted by Pro4Jackster

I have given up on the Stillen Supercharger. It got to the point where we were going to have to redesign most of the original kit to make anymore power (belt routing, charge pipe, relocate MAFs, new air filter and intake pipe, bigger heat exchanger, separate IAT sensor, etc). And since we are already spinning the SI in the red at 56K rpms, I don't want to spend any more money on this setup. I just sold the kit to a local guy and it's getting installed right now.

My motor was finished a couple of months ago, and now has just over 1000 miles on it. We ended up going with 10:1 Arias pistons and Carrillo rods. Ron took apart and cleaned the heads up. So the motor is ready for a lot more than this kit can put out. So it's time for a JTran Motorsports Low-Mount Single Turbo.

ladies and gentleman of the jury... I CALLED THAT ****!

Mr.Squeeze · 05-22-2014, 07:04 PM

Quote:

Originally Posted by Pro4Jackster

I have given up on the Stillen Supercharger. It got to the point where we were going to have to redesign most of the original kit to make anymore power (belt routing, charge pipe, relocate MAFs, new air filter and intake pipe, bigger heat exchanger, separate IAT sensor, etc). And since we are already spinning the SI in the red at 56K rpms, I don't want to spend any more money on this setup. I just sold the kit to a local guy and it's getting installed right now.

My motor was finished a couple of months ago, and now has just over 1000 miles on it. We ended up going with 10:1 Arias pistons and Carrillo rods. Ron took apart and cleaned the heads up. So the motor is ready for a lot more than this kit can put out. So it's time for a JTran Motorsports Low-Mount Single Turbo.

You are going to love the turbo good choice and good luck.

05-22-2014, 09:00 AM	#1 (permalink)
Pro4Jackster Base Member Join Date: Oct 2011 Location: NW Houston Posts: 130 Drives: '08 350Z Rep Power: 15	I have given up on the Stillen Supercharger. It got to the point where we were going to have to redesign most of the original kit to make anymore power (belt routing, charge pipe, relocate MAFs, new air filter and intake pipe, bigger heat exchanger, separate IAT sensor, etc). And since we are already spinning the SI in the red at 56K rpms, I don't want to spend any more money on this setup. I just sold the kit to a local guy and it's getting installed right now. My motor was finished a couple of months ago, and now has just over 1000 miles on it. We ended up going with 10:1 Arias pistons and Carrillo rods. Ron took apart and cleaned the heads up. So the motor is ready for a lot more than this kit can put out. So it's time for a JTran Motorsports Low-Mount Single Turbo. Mr.Squeeze, jwick and elperuano like this. __________________ Jtranbuilt '08 Z [Jtran PT7075 Single - Fujitsubo - Transgo - Wilwood - TE37SL - BC Racing]

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
My Stillen blower blew up :(	FireDan50	Forced Induction	20	08-22-2013 06:05 AM
GReddy High Capacity Aluminum Oil Pan VQ35HR VQ37HR USED $269 w/ FREE SHIPPING*	Sales@AAMComp	Drivetrain/Engine	12	10-30-2012 12:53 PM
WTB: ATI Blower Fan	DIGItonium	Misc Items for sale (No Z stuff)	6	12-29-2010 01:38 PM
Any 370s running higher than 20psi?	GoDZiLLa_845	Forced Induction	68	04-16-2010 11:31 PM
NEW Exedy Stage 2 Cerametalic Clutch Kit w/Chromaly Flywheel VQ35HR/VQ37	NIZMOZ	Parts for sale (Private Classifieds)	8	10-25-2009 08:49 AM