GT Motorsports: 370Z Supercharger system development

blue660r01

I didnt bother to read most of these posts. I am not a fan of Stillen so dont put fanboy **** on me. But will you SHUT UP when it comes to bashing on other kits in a certain sponsors thread? All it does is cause drama. This thread is to support GTM's SC kit for the 370z. In no way does STILLEN tie into this due to the title. So STFU and keep it GTM related. If you want drama start a new thread.

Sponsors----you bash another company in your thread. I wont buy from you being it seems you have nothing to do other than hate on other companies and it gives you a insecure look

Members---- you look like douche bags.

1slow370

Thanks for the support on this and again a little bigger

We all need to STFU about the vendors

blue660r01

Put your money where your mouth is big boy. Just like you seem to post in this thread easily....take it to the track and prove your mouth is worthy as your typing.
Makes me pissed when people bash a paying sponsors thread. MMC racing?? (got nothing against him personally btw but making an example) hmmmm sounds like it should be a paying member huh? Keep the **** out of the thread if you dont like it. All I gotta say. *drops mic*

FuszNissan

__________________
Mods: Too Many to list!
LouFuszNissan
ZDAYZ 2012

1slow370

Now just to be sporting here is my question about the MAF placement between the kits, How come no one is setting the MAF sensors in a draw through setup so they can actually measure the volume of air entering the engine before it is compressed, and splicing the IAT wiring off to a manifold sensor to accurately measure the incoming air temperature? I restate my question of whether or not you were able to upgrade the MAP sensor to gauge the amount of pressure in the manifold, or by retaining a mostly stock setup do you plan to simply adjust the fuel tables and VE to go around the problem.

Ok now sam answer my tech question

(oh and it's been almost three weeks now are my test-pipes still on back-order)

SAM@GTM

Let start with map sensor, the map sensor that you're seeing is a very low range map sensor or in a better way to describe, it is a barometric press sensor, It is mainly there for altitude compensation.

The key of placing the intake temp sensors as a blow through is to give the ecu the most accurate info possible so the intake temp compensation can be effective .

If you place the sensor in draw through setup, compensation for heat soak condition(for example) will be impossible and if you put it in the charge pipe (the stillen kit) then you are always reading the hot air out the blower .

Therefor placing the maf sensor in a blow through will gave us the most accurate reading of air temp before entering the engine.

Sam

1slow370

I know it's a 1bar map thats why i asked if you upgraded it to like a 2bar, but i don't know if uprev supports the map scaling to do this.

What i ment is why not add 2 IAT sensors and splice the wiring from the combined charge sensors nissan gives you to them so that you could have a more accurate draw through MAF as well as charge temp compensation from the IAT's

Edit: I'm fairly competent with EFI and F/I as i've done NA conversions before so i know what the sensors do

Edit2: I'm wondering how you accounted for the increased density since a blow through MAF cannot pick up pressure and the factory sensor can't either

Kyle@STILLEN

Sam,

Please keep your comments in regards to our supercharger kit to the facts...Your information about our kit is inaccurate.

Best of luck!

MMC Racing

Take it to a track? We are going to race at 2 different tracks 3000 miles away and compare the times somehow?

I'm not a shop owner or in the automotive industry in any way. Nice try.

blue660r01

MMC Racing....Sounds like a shady and fake sponsor name. Do you have hidden business going in via PM? Dont like the accusations for no reason do ya?

Its ok though. Dont come out here. I know I would hand your *** to you anyways.

1slow370

Ok i have had my wars with MMC before and i share your anger but lets just chill. (and if you have an LP640 you'd fookin waste him, and if i'm ever out by you can we cruise sometime?)

Oh and this is the GTM supercharger thread someone could get murdered in here and it wouldn't get locked unless they wanted it to

370zdub

__________________
2010 Ford 6.4L Power Stroke Diesel: 588whp/1082wtrq
2007 Dodge 6.7L Cummins Diesel: 788whp/1405wtrq, runs 12's @ 7400lbs, Still miss my 370z!