VSR Engine Build

Mr&Mrs · 03-05-2014, 01:16 AM

Some people get better prices by being smooth talkers.

Or by giving back alley handies....I like to try and smooth talk.....first....

SRperformance · 03-05-2014, 07:57 AM

Quote:

Originally Posted by Chuck33079

Has anybody else gotten a quote from these guys?

I did mention a group buy and no one responded.

Quote:

Originally Posted by elperuano

I never did.

Quote:

Originally Posted by Mr&Mrs

Nope

Quote:

Originally Posted by MyKindaGuise

Nope.

Quote:

Originally Posted by cosmogirl

What are you guys waiting for?

For a response if you guys are interested in a group buy.

Quote:

Originally Posted by OMGWTFBBQ

We have money burning a hole in our pockets and we're waiting on a price tag for an engine build lol.

I want to help save you guys from a 3rd degree burn...I can do that!!

Quote:

Originally Posted by blackonorange

yea id like a quote to on this type of build...

Quote:

Originally Posted by ZKraken22

I never understood why the price can't be out in the open. Why send a private pm?

Quote:

Originally Posted by Mr&Mrs

Some people get better prices by being smooth talkers.

Or by giving back alley handies....I like to try and smooth talk.....first....

No smooth talk....just the handy...just don't look into my eye's.

To make a estimate I need more info from you guys.

1) Rebuild your current engine?
2) New bare block from Nissan?
3) Does everyone want the same CP Pistons
4) K1 Rods?
5) Cryo treatment?
6) L19's
7) Balance?
8) Build a short Block? Or long Block
9) Are you shipping the car down for the install

Building estimates are very time consuming and each and every one of you could want something different. I post up some prices for a brand new short block.

plus if we do a group buy, you guys will receive a better price on the pistons and rods.

I look forward to building all you guys a engine
Thanks
Bobby

Chuck33079 · 03-05-2014, 08:00 AM

Like I said before, no interest on a group buy. I would hope you would be open to selling me a built short block without the group buy. I was hoping to get a quote to recreate Cosmo's build with a fresh block, and also if I shipped you my block.

SRperformance · 03-05-2014, 08:12 AM

Quote:

Originally Posted by Chuck33079

Like I said before, no interest on a group buy. I would hope you would be open to selling me a built short block without the group buy. I was hoping to get a quote to recreate Cosmo's build with a fresh block, and also if I shipped you my block.

Ok, will do. can you PM me your email address? I will shoot you over a estimate.

Mr&Mrs · 03-05-2014, 08:52 AM

Since I am local I would just let you use my current block. I like cosmos build as well. Almost forgot any alleys near the new shop? I haven't made it out to it yet.

SRperformance · 03-05-2014, 09:24 AM

Quote:

Originally Posted by Mr&Mrs

Since I am local I would just let you use my current block. I like cosmos build as well. Almost forgot any alleys near the new shop? I haven't made it out to it yet.

hahahahahahahahah

SRperformance · 03-05-2014, 09:39 AM

By the way how soon are you guys looking to do a build?

Chuck33079 · 03-05-2014, 09:41 AM

No time soon for me. I just want a number in mind if I ever need to do it.

Ron · 03-05-2014, 10:02 AM

Quote:

Originally Posted by SRperformance

This is something I'm considering doing to the VQ platform. We are having great success with our Subaru Blocks! ETS made 830hp on our block, PRS WRC Rally car with NO wastegate came in first place. These are not just off the shelf press in guards. We actually machine the block and deck it. Let me know if there is a market for them..Thanks!

Closed deck goodness! I would be interested. Is this something that you can do now if I were to send you a block or is R&D needed for our blocks?

Chuck33079 · 03-05-2014, 10:05 AM

Doesn't the Z run hot anyway? How much more heat are we going to be dealing with on a closed deck block?

SRperformance · 03-05-2014, 10:08 AM

Quote:

Originally Posted by Ron

Closed deck goodness! I would be interested. Is this something that you can do now if I were to send you a block or is R&D needed for our blocks?

If you send me a block this is something I can do in about two weeks.

SRperformance · 03-05-2014, 10:11 AM

Quote:

Originally Posted by Chuck33079

Doesn't the Z run hot anyway? How much more heat are we going to be dealing with on a closed deck block?

Actually no. I did a HR closed deck about 3 years ago and zero issues with heat. keep in mind the cylinder has water passages that only allow certain amount flow. The guards will have zero restrictions to the heads.

Chuck33079 · 03-05-2014, 10:13 AM

So you don't block off any coolant passages with the guards? Sweet.

SRperformance · 03-05-2014, 10:28 AM

For those who are looking for a NEW Short block.

You get!
New Block
New Crank
OEM Bearings
CP 10:1
K1 Rods
Engine Balance
Cryogenics
Blue Printed
all for the low price of 5699.00

Chuck33079 · 03-05-2014, 10:30 AM

Quote:

Originally Posted by SRperformance

For those who are looking for a NEW Short block.

You get!
New Block
New Crank
OEM Bearings
CP 10:1
K1 Rods
Engine Balance
Cryogenics
Blue Printed
all for the low price of 5699.00

Wow. That's a fantastic price. A few follow on questions:
Are there coated bearings available?
Can you have the crank nitrided, or is it that way from the factory?
Would it help to send you the flywheel we're going to use so you can balance it together?

03-05-2014, 01:16 AM	#31 (permalink)
Mr&Mrs A True Z Fanatic Join Date: May 2010 Location: Tampa Posts: 4,207 Drives: RZ34 Rep Power: 31941	Some people get better prices by being smooth talkers. Or by giving back alley handies....I like to try and smooth talk.....first.... OMGWTFBBQ, blackonorange, GaleForce and 2 others like this. __________________ Project Z <--Click - Check out the link too many mods to list!

03-05-2014, 08:00 AM	#33 (permalink)
Chuck33079 A True Z Fanatic Join Date: Nov 2011 Location: Houston Posts: 12,265 Drives: 2011 370ztt Rep Power: 29539	Like I said before, no interest on a group buy. I would hope you would be open to selling me a built short block without the group buy. I was hoping to get a quote to recreate Cosmo's build with a fresh block, and also if I shipped you my block. GaleForce likes this. __________________ 2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

03-05-2014, 08:52 AM	#35 (permalink)
Mr&Mrs A True Z Fanatic Join Date: May 2010 Location: Tampa Posts: 4,207 Drives: RZ34 Rep Power: 31941	Since I am local I would just let you use my current block. I like cosmos build as well. Almost forgot any alleys near the new shop? I haven't made it out to it yet. __________________ Project Z <--Click - Check out the link too many mods to list!

03-05-2014, 09:41 AM	#38 (permalink)
Chuck33079 A True Z Fanatic Join Date: Nov 2011 Location: Houston Posts: 12,265 Drives: 2011 370ztt Rep Power: 29539	No time soon for me. I just want a number in mind if I ever need to do it. __________________ 2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

03-05-2014, 10:05 AM	#40 (permalink)
Chuck33079 A True Z Fanatic Join Date: Nov 2011 Location: Houston Posts: 12,265 Drives: 2011 370ztt Rep Power: 29539	Doesn't the Z run hot anyway? How much more heat are we going to be dealing with on a closed deck block? __________________ 2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

03-05-2014, 09:39 AM	#37 (permalink)
SRperformance Base Member Join Date: Jun 2012 Location: tampa Posts: 137 Drives: 2003 Z32 Rep Power: 13	By the way how soon are you guys looking to do a build?

03-05-2014, 10:13 AM	#43 (permalink)
Chuck33079 A True Z Fanatic Join Date: Nov 2011 Location: Houston Posts: 12,265 Drives: 2011 370ztt Rep Power: 29539	So you don't block off any coolant passages with the guards? Sweet. __________________ 2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

03-05-2014, 10:28 AM	#44 (permalink)
SRperformance Base Member Join Date: Jun 2012 Location: tampa Posts: 137 Drives: 2003 Z32 Rep Power: 13	For those who are looking for a NEW Short block. You get! New Block New Crank OEM Bearings CP 10:1 K1 Rods Engine Balance Cryogenics Blue Printed all for the low price of 5699.00 OMGWTFBBQ, Mr&Mrs, gbrettin and 6 others like this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Engine Build Components	theDreamer	Forced Induction	30	02-16-2016 11:48 AM
Engine Build	esfourteen	Forced Induction	190	07-26-2014 09:55 PM
Engine Build Thread	DIGItonium	Forced Induction	113	04-07-2013 01:17 PM
engine build time	Nissan370	Forced Induction	42	08-05-2012 09:48 AM