GTM SC Intake tube

faceglide · 01-31-2014, 09:44 PM

Quote:

Originally Posted by Tombonombona

If I had to do it over again I think I definitely would have went with Boosted Performance, or the Stillen kit.

Fast Intentions TT.......

Joepro · 02-01-2014, 07:27 AM

I though I wanted a SC too, but turbos are so much more fun IMO, Plus value vs performance, I see you get a well build kit, great service, an great fexiblilty with the BP kit. Even on low boost it will out perform the SC kit in terms of numbers anyway...

Dzel · 02-01-2014, 09:13 AM

Maybe Sasha can branch out into the world of superchargers??? If so Sasha I'm your guinea pig!

Sent with TapAhoe

Infidel · 02-01-2014, 10:53 AM

I think I'm gonna be sick

George@GTM · 02-03-2014, 04:38 AM

Tom,

I am sorry it has taken you so long to get your replacment tube, the vendor that supplies us this tube is sending us a new one finally and we should be shipping it to you this week.

Thank you for your patience,

-George

octet · 02-03-2014, 04:48 AM

George, situations like these are unacceptable in terms of Customer Service, and apologies like these don't help, specially when they are months later. As previously stated, I'm running few businesses myself, and if that would happen in one of them, I'd make sure my guys will keep in contact at least weekly, send a free gift or a voucher.

It's a shame guys that your reputation is not as good as your work, your products are way better than other kits available on the market today. Improve on the communication and customer relations and everything will change in better.

Saying that, I deal with GTM and never ever had any problems, at the moment I'm waiting for the Twin SuperCharger kit to be dispatched within the next two weeks as agreed initially.

Chuck33079 · 02-03-2014, 07:03 AM

Quote:

Originally Posted by George@GTM

Tom,

I am sorry it has taken you so long to get your replacment tube, the vendor that supplies us this tube is sending us a new one finally and we should be shipping it to you this week.

Thank you for your patience,

-George

:jerkingoffmotionsmiley:

8 months is not a vendor problem. It's a GTM problem. You guys seem to be throwing your vendors under the bus a lot lately to explain problems that fall squarely on your shoulders. The buck stops with you. Your customers don't care WHY you failed them. They care THAT you failed them. And it's really telling the OP was left hanging until this thread popped up, and then magically Sam picks that exact moment to call. Guys, we're not idiots. Give us some credit.

Dzel · 02-03-2014, 08:17 AM

Exactly! Nicely said

Sent with TapAhoe

Chuck33079 · 02-03-2014, 08:20 AM

Why can't these guys get their **** together? I like their parts. I want more of them. I have cash in hand to buy more of them. But I'll be damned if they see another dime of my money until they get their issues worked out.

Dzel · 02-03-2014, 09:42 AM

Man that's exactly how I feel. I'll have to wait till next year to go FI but a sweet deal came up on a SC and I got the ok from the wifey. But I didn't go through with it just cause I do not want to deal with GTM.

The car would sit there for months with the SC installed waiting on a tube from Sam. SMH these guys are single handedly ruining modding for this community

Sent with TapAhoe

octet · 02-03-2014, 10:25 AM

Guys, do what i did, give Sam a call and express your interest in the products and concerns in the reputation. I'm pretty sure this will help and things will start changing, rather than voicing your concerns here. I'm sure Sam is not running away with people's money and GTM has great track record in terms of products brought to the market, is not like they are one guy company with a website and a telephone number, they're established.

Speak to him directly and tell him as it is! He seems a very nice guy to deal with.

Dzel · 02-03-2014, 12:28 PM

You must be new here. Use the search button read ALL the threads started by Sam. Then your thoughts are more than welcome.

Sent with TapAhoe

Chuck33079 · 02-03-2014, 12:41 PM

Quote:

Originally Posted by octet

Guys, do what i did, give Sam a call and express your interest in the products and concerns in the reputation. I'm pretty sure this will help and things will start changing, rather than voicing your concerns here. I'm sure Sam is not running away with people's money and GTM has great track record in terms of products brought to the market, is not like they are one guy company with a website and a telephone number, they're established.

Speak to him directly and tell him as it is! He seems a very nice guy to deal with.

Get back to us on that once you have parts in hand.

FPenvy · 02-03-2014, 12:45 PM

yeaaaaaaa this thread wont last much longer lol

IBTL?

Tombonombona · 02-03-2014, 02:38 PM

I'm going to throw them a bone here. When Sam called he explained his situation and he did sound quite stressed by it.. I can understand having vendor issues like that, I've had to deal with similar stuff with my work, but if we had a supplier that couldn't keep up, or provide quality work in a timely manner then we shitcanned them and got a different one…. Maybe where they are located that is not an option? I am not sure. Also apparently they are working on getting equipment to finish piping in house.
I'm sure they have realized that they have some issues and are trying to work it out… We can all agree that they have a great product, they just need to work on a few other aspects. I thank Sam again for calling me directly.

02-01-2014, 07:27 AM	#32 (permalink)
Joepro A True Z Fanatic Join Date: Aug 2012 Location: Athens ohio Posts: 1,213 Drives: Company car Rep Power: 33	I though I wanted a SC too, but turbos are so much more fun IMO, Plus value vs performance, I see you get a well build kit, great service, an great fexiblilty with the BP kit. Even on low boost it will out perform the SC kit in terms of numbers anyway... __________________ Swift\|Koni\|SPC\| FI CBE\|Z1\|Stillen\|Sbend\|Zspeed\|R/T Tuned\|523 whp\|458 tq\|10.5 psi\|SOLD Joepro's Journal\|Joepro's Boosted Performance Build \|Pittsburgh-Western-Pa-Ohio-Wv-Group

02-01-2014, 09:13 AM	#33 (permalink)
Dzel A True Z Fanatic Join Date: May 2011 Location: Midland, TX Posts: 3,884 Drives: 11 370Z PW M6 Rep Power: 22	Maybe Sasha can branch out into the world of superchargers??? If so Sasha I'm your guinea pig! Sent with TapAhoe __________________ 10secWS6 IF YOU CAN'T SWING IT THEN DON'T BRING IT! Check out Domestic Performance C.C.

02-01-2014, 10:53 AM	#34 (permalink)
Infidel Enthusiast Member Join Date: Mar 2013 Location: Central Florida Posts: 457 Drives: 2013 GM 6MT Rep Power: 14	I think I'm gonna be sick elperuano likes this.

02-03-2014, 04:48 AM	#36 (permalink)
octet Enthusiast Member Join Date: Jul 2013 Location: London, UK Posts: 305 Drives: 2017 Nismo 370z 6MT Rep Power: 3366	George, situations like these are unacceptable in terms of Customer Service, and apologies like these don't help, specially when they are months later. As previously stated, I'm running few businesses myself, and if that would happen in one of them, I'd make sure my guys will keep in contact at least weekly, send a free gift or a voucher. It's a shame guys that your reputation is not as good as your work, your products are way better than other kits available on the market today. Improve on the communication and customer relations and everything will change in better. Saying that, I deal with GTM and never ever had any problems, at the moment I'm waiting for the Twin SuperCharger kit to be dispatched within the next two weeks as agreed initially. Dzel, Voice59 and elperuano like this.

02-03-2014, 08:17 AM	#38 (permalink)
Dzel A True Z Fanatic Join Date: May 2011 Location: Midland, TX Posts: 3,884 Drives: 11 370Z PW M6 Rep Power: 22	Exactly! Nicely said Sent with TapAhoe __________________ 10secWS6 IF YOU CAN'T SWING IT THEN DON'T BRING IT! Check out Domestic Performance C.C.

02-03-2014, 04:38 AM	#35 (permalink)
George@GTM NOT AN ACTIVE VENDOR. DO NOT BUY Join Date: Dec 2008 Location: California Posts: 146 Drives: TTG41 Rep Power: 16	Tom, I am sorry it has taken you so long to get your replacment tube, the vendor that supplies us this tube is sending us a new one finally and we should be shipping it to you this week. Thank you for your patience, -George

02-03-2014, 08:20 AM	#39 (permalink)
Chuck33079 A True Z Fanatic Join Date: Nov 2011 Location: Houston Posts: 12,265 Drives: 2011 370ztt Rep Power: 29538	Why can't these guys get their **** together? I like their parts. I want more of them. I have cash in hand to buy more of them. But I'll be damned if they see another dime of my money until they get their issues worked out. Dzel, Voice59 and elperuano like this. __________________ 2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

02-03-2014, 09:42 AM	#40 (permalink)
Dzel A True Z Fanatic Join Date: May 2011 Location: Midland, TX Posts: 3,884 Drives: 11 370Z PW M6 Rep Power: 22	Man that's exactly how I feel. I'll have to wait till next year to go FI but a sweet deal came up on a SC and I got the ok from the wifey. But I didn't go through with it just cause I do not want to deal with GTM. The car would sit there for months with the SC installed waiting on a tube from Sam. SMH these guys are single handedly ruining modding for this community Sent with TapAhoe __________________ 10secWS6 IF YOU CAN'T SWING IT THEN DON'T BRING IT! Check out Domestic Performance C.C.

02-03-2014, 10:25 AM	#41 (permalink)
octet Enthusiast Member Join Date: Jul 2013 Location: London, UK Posts: 305 Drives: 2017 Nismo 370z 6MT Rep Power: 3366	GTM SC Intake tube Guys, do what i did, give Sam a call and express your interest in the products and concerns in the reputation. I'm pretty sure this will help and things will start changing, rather than voicing your concerns here. I'm sure Sam is not running away with people's money and GTM has great track record in terms of products brought to the market, is not like they are one guy company with a website and a telephone number, they're established. Speak to him directly and tell him as it is! He seems a very nice guy to deal with.

02-03-2014, 12:28 PM	#42 (permalink)
Dzel A True Z Fanatic Join Date: May 2011 Location: Midland, TX Posts: 3,884 Drives: 11 370Z PW M6 Rep Power: 22	You must be new here. Use the search button read ALL the threads started by Sam. Then your thoughts are more than welcome. Sent with TapAhoe elperuano likes this. __________________ 10secWS6 IF YOU CAN'T SWING IT THEN DON'T BRING IT! Check out Domestic Performance C.C.

02-03-2014, 02:38 PM	#45 (permalink)
Tombonombona Base Member Join Date: May 2012 Location: Sk, Canada Posts: 159 Drives: 2012 370z Mag Black Rep Power: 12	I'm going to throw them a bone here. When Sam called he explained his situation and he did sound quite stressed by it.. I can understand having vendor issues like that, I've had to deal with similar stuff with my work, but if we had a supplier that couldn't keep up, or provide quality work in a timely manner then we shitcanned them and got a different one…. Maybe where they are located that is not an option? I am not sure. Also apparently they are working on getting equipment to finish piping in house. I'm sure they have realized that they have some issues and are trying to work it out… We can all agree that they have a great product, they just need to work on a few other aspects. I thank Sam again for calling me directly. __________________ Tom B. Exotic Speed R2 Titan Catback-GTM Stage 2 Supercharger 522 whp on a mustang dyno 2004 Subaru STi **SOLD WRITTEN OFF**

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] Long tube intake aem eti	bfowlzr33	Parts for sale (Private Classifieds)	5	11-17-2013 07:55 AM
[FOR SALE] Mishimoto Post MAF Intake Tube	brucewayne	Parts for sale (Private Classifieds)	7	08-26-2013 05:21 PM
[FOR SALE] USED HPS intake tube and K&N drop ins	willskip	Parts for sale (Private Classifieds)	22	10-15-2012 12:23 PM
[FOR SALE] Injen Long Tube Intake	Kandy OrangeZ	Parts for sale (Private Classifieds)	3	09-13-2012 07:32 PM
Long tube intake	bigZ	Intake/Exhaust	31	03-10-2011 04:18 PM