Blown Motor, Engine Rebuild/Replacement.

esfourteen

I definitely underestimated how restricted that manifold exit was compared to the turbo flange, just called my shop to make sure they hadn't bolted the turbos up yet and fortunately I caught them before so they are going to grind that out as well, good catch!

As for break in, we used a pressurized lubricator that connects to the block and forces oil everywhere (no dry cranking) along with a break in oil for start up, after 20-30 minutes of running that at ~2k rpm, we drained it and replaced with conventional oil for the first 500, changed that for conventional again and left it until about 4-5k.

Once I swapped to synthetic at 5k I noticed my valve train noise from VVEL was MUCH louder than it was prior to the build and when I was breaking in the engine. I don't know if it was the break in oil or just the whole process but VVEL is noisy as hell now. I used an additive by RS-R called "ran up" and it was night and day difference, sounded like stock again, so I'm going to try ester oil to see if its quieter.

__________________
Build Thread | GTM TT Install Thread | Engine Build Thread