Blown Motor, Engine Rebuild/Replacement.

COSMO · 06-13-2014, 11:15 AM

Alright ladies and gents, I'm BACK!!! Been trying to sell my house for a few months now and now have a cash offer so I am now forced to get my car up and going Fast... It's crazy since my little vacay to Jamaica since I've been back everything just seems to flow perfectly..... It's funny what a week long of listening to Bob Marley does to you.

jwick · 06-13-2014, 11:37 AM

Don't forget the pot

COSMO · 06-15-2014, 03:24 PM

Soon I will be refilling the coolant system and was considering doing a 75/25 water/antifreeze mix mainly due to fact that it really doesn't get that cold here. Anyone else running this mixture or close?

black_sedan · 06-15-2014, 03:52 PM

Should work fine. I've heard of guys up here that run the same mix with a bottle of water watter with no issues.

Quote:

Originally Posted by COSMO

Soon I will be refilling the coolant system and was considering doing a 75/25 water/antifreeze mix mainly due to fact that it really doesn't get that cold here. Anyone else running this mixture or close?

jwick · 06-15-2014, 04:04 PM

Quote:

Originally Posted by COSMO

Soon I will be refilling the coolant system and was considering doing a 75/25 water/antifreeze mix mainly due to fact that it really doesn't get that cold here. Anyone else running this mixture or close?

That was my goal. think I missed a little heavy on the antifreeze. we have very similar climates so go for it. Don't forget the water wetter

COSMO · 06-16-2014, 08:31 PM

Motor, tranny, and most wiring in!!!!!

COSMO · 06-20-2014, 07:48 PM

As of today I'm 97 % finished. Worked all day and made great progress. Will shoot some pics tomorrow...

COSMO · 06-21-2014, 08:40 AM

Almost!!!!!!!!!!

Limeybastard · 06-21-2014, 08:42 AM

Quote:

Originally Posted by COSMO

Almost!!!!!!!!!!

Looking good and hoping that it all works out in the end for you. I have been reading this thread and also the other one where the guy from FL blew his engine.

MidnightBlueZ · 06-21-2014, 06:18 PM

Sweet! Looking forward to seeing the results, I bet you can't wait to be up and running again.

COSMO · 06-21-2014, 07:49 PM

I'm dying to drive my car again, especially since I can now run the max boost levels knowing the motor will hold the power... At the gulf for 4 nights so should finish it before next week is over. Thanks for the support..

Quote:

Originally Posted by MidnightBlueZ

Sweet! Looking forward to seeing the results, I bet you can't wait to be up and running again.

COSMO · 06-21-2014, 07:54 PM

I just picked up a set of nismo rims and could use a hand on spacers or no spacers..?? With my sport wheels I ran 25mm rear and 20mm front but I believe the off set is different on the nismo's..

jwick · 06-21-2014, 07:54 PM

Quote:

Originally Posted by COSMO

I just picked up a set of nismo rims and could use a hand on spacers or no spacers..?? With my sport wheels I ran 25mm rear and 20mm front but I believe the off set is different on the nismo's..

NEVER run spacers!

COSMO · 06-21-2014, 08:26 PM

Have ran spacers on everything I have ever owned and never had any issues...

jwick · 06-21-2014, 08:41 PM

Fortunate and a lot of people are in your boat. I happen to be in the group that will never consider spacers but I'm an engineer and can do the math of the impact.

06-13-2014, 11:37 AM	#857 (permalink)
jwick A True Z Fanatic Join Date: Dec 2010 Location: Houston Posts: 14,532 Drives: '10 G37 6MT Rep Power: 2465056	Don't forget the pot GaleForce, Rid3_FaM0uS and COSMO like this. __________________ '10 G37T 6MT Graphite/Graphite - BP - G37T Build

06-20-2014, 07:48 PM	#862 (permalink)
COSMO A True Z Fanatic Join Date: Dec 2012 Location: FL Posts: 1,816 Drives: 2012 Touring GTM TT Rep Power: 19	As of today I'm 97 % finished. Worked all day and made great progress. Will shoot some pics tomorrow... falconfixer, Rid3_FaM0uS and MidnightBlueZ like this.

06-21-2014, 08:41 PM	#870 (permalink)
jwick A True Z Fanatic Join Date: Dec 2010 Location: Houston Posts: 14,532 Drives: '10 G37 6MT Rep Power: 2465056	Fortunate and a lot of people are in your boat. I happen to be in the group that will never consider spacers but I'm an engineer and can do the math of the impact. GaleForce likes this. __________________ '10 G37T 6MT Graphite/Graphite - BP - G37T Build

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Blown motor!!!!	COSMO	Forced Induction	166	11-25-2013 08:33 PM
Someone in the DFW area who can rebuild a 370z motor	Denny McLain	Engine & Drivetrain	16	01-29-2013 05:27 PM
370z engine blown	Fabsnoop	Nissan 370Z General Discussions	53	06-02-2012 11:29 PM
WORST DAY!!!! Possible engine blown???!!!!	Westwood	Engine & Drivetrain	189	04-09-2012 11:28 AM
vq37vhr ( 370z motor ) NOT BLOWN	soaka1	Wanted	0	03-10-2010 10:01 AM

06-15-2014, 03:24 PM	#858 (permalink)
COSMO A True Z Fanatic Join Date: Dec 2012 Location: FL Posts: 1,816 Drives: 2012 Touring GTM TT Rep Power: 19	Soon I will be refilling the coolant system and was considering doing a 75/25 water/antifreeze mix mainly due to fact that it really doesn't get that cold here. Anyone else running this mixture or close?

06-21-2014, 06:18 PM	#865 (permalink)
MidnightBlueZ Enthusiast Member Join Date: Apr 2013 Location: Nashville, TN Posts: 291 Drives: 13 Nissan 370Z Turbo Rep Power: 16	Sweet! Looking forward to seeing the results, I bet you can't wait to be up and running again.

06-21-2014, 07:54 PM	#867 (permalink)
COSMO A True Z Fanatic Join Date: Dec 2012 Location: FL Posts: 1,816 Drives: 2012 Touring GTM TT Rep Power: 19	I just picked up a set of nismo rims and could use a hand on spacers or no spacers..?? With my sport wheels I ran 25mm rear and 20mm front but I believe the off set is different on the nismo's..

06-21-2014, 08:26 PM	#869 (permalink)
COSMO A True Z Fanatic Join Date: Dec 2012 Location: FL Posts: 1,816 Drives: 2012 Touring GTM TT Rep Power: 19	Have ran spacers on everything I have ever owned and never had any issues...