My Stillen blower blew up :(

SRperformance · 08-09-2013, 05:37 PM

Dan flew in today at 12:30 picked up his Z, took it for a test drive and came back a little scared of how much power it makes. Just got off the phone with him and he is halfway home to Charlotte.

elperuano · 08-09-2013, 05:54 PM

That's great. I'm sure he can't stop smiling

Nissan370 · 08-09-2013, 07:29 PM

Welcome to the vsr single family im still smiling

dc3843 · 08-11-2013, 09:43 PM

I've been researching kits, might be calling you guys about a single kit on my 370. That's a damn good price you have on your site, and it says installed, that right?

1slow370 · 08-22-2013, 03:29 AM

just gonna say i've seen quite a few blown vortech units, they can't have the belt overtightened or the input bearings will go fast (had one where the bearing bore in the front cover actually went out of round and had to be sleeved) and you can only spin them to 60% capacity or the output seal behind the impeller blows out and you start sucking the lube through the engine til the blower runs dry and dies. eventually you end up putting 928motorsports on your speed dial and memorizing the part numbers for the upgraded seals and bearings.

Nissan370 · 08-22-2013, 06:05 AM

i had the v2 on my mustang for years with no problem but it did share the engines oil. great little blower i was using 8rib belt to stop slippage uptop

it should be common practice when every you buy a used unit to swap out the bearings just to be safe

08-09-2013, 05:37 PM	#16 (permalink)
SRperformance Base Member Join Date: Jun 2012 Location: tampa Posts: 137 Drives: 2003 Z32 Rep Power: 12	Dan flew in today at 12:30 picked up his Z, took it for a test drive and came back a little scared of how much power it makes. Just got off the phone with him and he is halfway home to Charlotte. cdoxp800 and carlitos_370z like this.

08-09-2013, 07:29 PM	#18 (permalink)
Nissan370 Enthusiast Member Join Date: Feb 2011 Location: Baltimore Posts: 431 Drives: 2009 ST BLK 370Z Rep Power: 14	Welcome to the vsr single family im still smiling __________________ 370z vsr motorsports single turbo/built motor 9.1cr 525rwhp/450rwtq @ 10.5psi (stock maf maxed out)

08-22-2013, 03:29 AM	#20 (permalink)
1slow370 A True Z Fanatic Join Date: Aug 2009 Location: In the D Posts: 3,732 Drives: v8 74 260z ;) Rep Power: 7250	just gonna say i've seen quite a few blown vortech units, they can't have the belt overtightened or the input bearings will go fast (had one where the bearing bore in the front cover actually went out of round and had to be sleeved) and you can only spin them to 60% capacity or the output seal behind the impeller blows out and you start sucking the lube through the engine til the blower runs dry and dies. eventually you end up putting 928motorsports on your speed dial and memorizing the part numbers for the upgraded seals and bearings. __________________ ANSWER PRICE LIST Answers - - - - - - - - - - - - - - - - $0.75 Answers (requiring thought) - - - - $1.25 Answers (correct) - - - - - - - - - - $12.50

08-22-2013, 06:05 AM	#21 (permalink)
Nissan370 Enthusiast Member Join Date: Feb 2011 Location: Baltimore Posts: 431 Drives: 2009 ST BLK 370Z Rep Power: 14	i had the v2 on my mustang for years with no problem but it did share the engines oil. great little blower i was using 8rib belt to stop slippage uptop it should be common practice when every you buy a used unit to swap out the bearings just to be safe __________________ 370z vsr motorsports single turbo/built motor 9.1cr 525rwhp/450rwtq @ 10.5psi (stock maf maxed out)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
A/C Seat blower filters......	BeachZTT	Nissan 370Z Roadster (Convertible)	12	01-26-2023 09:11 PM
2nd Problem with CNT HFCs --- blew out a hole	zforlife	Intake/Exhaust	20	04-11-2013 08:56 PM
Nissan blew it with me	Inspector71	Other Vehicles	57	10-19-2012 12:45 PM
Stock speakers blew	Synack	Audio & Video	20	05-12-2011 11:32 AM
WTB: ATI Blower Fan	DIGItonium	Misc Items for sale (No Z stuff)	6	12-29-2010 01:38 PM

08-09-2013, 05:54 PM	#17 (permalink)
elperuano A True Z Fanatic Join Date: Oct 2011 Location: Southwest FL Posts: 1,374 Drives: G37S Rep Power: 28	That's great. I'm sure he can't stop smiling

08-11-2013, 09:43 PM	#19 (permalink)
dc3843 Base Member Join Date: Apr 2013 Location: Southlake, tx Posts: 116 Drives: 2012 silver 6spd nav Rep Power: 12	I've been researching kits, might be calling you guys about a single kit on my 370. That's a damn good price you have on your site, and it says installed, that right?