Nissan 370Z Forum  

tial q bov source before or after tb

hi guys i installed 2 tial q bov's on the cold side piping of the intercooler , I was wondering do you guys run a source before or after the

Go Back   Nissan 370Z Forum > Nissan 370Z Tech Area > Engine & Drivetrain > Forced Induction


Reply
 
LinkBack Thread Tools Display Modes
Old 04-24-2013, 04:37 PM   #1 (permalink)
Base Member
 
Join Date: Mar 2011
Location: unknown
Posts: 177
Drives: twinturbo 370z
Rep Power: 14
hindi1973 is on a distinguished road
Default tial q bov source before or after tb

hi guys i installed 2 tial q bov's on the cold side piping of the intercooler , I was wondering do you guys run a source before or after the throttle body? I drilled and made 6mm outlet source on each side before the tb, Each bov with an individual line from the source to the bov using 4mm silicon hoses, Now i notice the air coming out ins't as much as it should( i have the correct spring -11 which matches my vacuum), So after more reading other ppl suggest the source should be after the tb , as the source behind the tb is boost only, And the bov needs vacuum source as well and that is found after the tb, So shall i drill the another source after tb , t the hose from behind the tb to a new hose after the tb then back again to the bov's, Or shall i cancel the source behind the tb and just use the new source after tb ..

thanks guys
hindi1973 is offline   Reply With Quote
Old 04-24-2013, 04:42 PM   #2 (permalink)
A True Z Fanatic
 
Dzel's Avatar
 
Join Date: May 2011
Location: Midland, TX
Posts: 3,884
Drives: 11 370Z PW M6
Rep Power: 22
Dzel has a reputation beyond reputeDzel has a reputation beyond reputeDzel has a reputation beyond reputeDzel has a reputation beyond reputeDzel has a reputation beyond reputeDzel has a reputation beyond reputeDzel has a reputation beyond reputeDzel has a reputation beyond reputeDzel has a reputation beyond reputeDzel has a reputation beyond reputeDzel has a reputation beyond repute
Default

I thought you drilled into the intake plenum?
__________________
10secWS6
IF YOU CAN'T SWING IT THEN DON'T BRING IT! Check out Domestic Performance C.C.
Dzel is offline   Reply With Quote
Old 04-24-2013, 04:47 PM   #3 (permalink)
Base Member
 
Join Date: Mar 2011
Location: unknown
Posts: 177
Drives: twinturbo 370z
Rep Power: 14
hindi1973 is on a distinguished road
Default

dzel,i drilled in the plastic side in the manifold right before the tb.
hindi1973 is offline   Reply With Quote
Old 04-24-2013, 04:54 PM   #4 (permalink)
A True Z Fanatic
 
Mitco39's Avatar
 
Join Date: Aug 2012
Location: Edmonton Alberta Canada
Posts: 2,089
Drives: 40th 370z
Rep Power: 131
Mitco39 has a reputation beyond reputeMitco39 has a reputation beyond reputeMitco39 has a reputation beyond reputeMitco39 has a reputation beyond reputeMitco39 has a reputation beyond reputeMitco39 has a reputation beyond reputeMitco39 has a reputation beyond reputeMitco39 has a reputation beyond reputeMitco39 has a reputation beyond reputeMitco39 has a reputation beyond reputeMitco39 has a reputation beyond repute
Default

You can see here where I tapped mine.

__________________
2007 Chevy Duramax - EFILive Tuned By Me
2010 40th W/ Nav - Boosted Performance - UpRev Tuned By Me
The Mrs. Ride -2012 335XI N55 BMW - Cobb Tuned By Me, Built by her
My Build --> http://www.the370z.com/members-370z-...39s-build.html
Mitco39 is offline   Reply With Quote
Old 04-24-2013, 05:03 PM   #5 (permalink)
Base Member
 
Join Date: Mar 2011
Location: unknown
Posts: 177
Drives: twinturbo 370z
Rep Power: 14
hindi1973 is on a distinguished road
Default

mitco, So you drilled after the tb, right in the middle section , Now the qustion is can i T the existing line behind the tb, And make a new hole for the new source after the tb and connect them together then run them to the bov ? Or do i have to cancel the old source i made and use the new one i will drill ?
hindi1973 is offline   Reply With Quote
Old 04-24-2013, 05:04 PM   #6 (permalink)
Base Member
 
Join Date: Mar 2011
Location: unknown
Posts: 177
Drives: twinturbo 370z
Rep Power: 14
hindi1973 is on a distinguished road
Default

MITCO , wht size hose are you running ? looks bigger than 6mm?
hindi1973 is offline   Reply With Quote
Old 04-24-2013, 05:15 PM   #7 (permalink)
A True Z Fanatic
 
Mitco39's Avatar
 
Join Date: Aug 2012
Location: Edmonton Alberta Canada
Posts: 2,089
Drives: 40th 370z
Rep Power: 131
Mitco39 has a reputation beyond reputeMitco39 has a reputation beyond reputeMitco39 has a reputation beyond reputeMitco39 has a reputation beyond reputeMitco39 has a reputation beyond reputeMitco39 has a reputation beyond reputeMitco39 has a reputation beyond reputeMitco39 has a reputation beyond reputeMitco39 has a reputation beyond reputeMitco39 has a reputation beyond reputeMitco39 has a reputation beyond repute
Default

There is no reason you should not be able to run a T. Just keep the lines going to the BOV's as short as possible. If you can get a T get one that is say a 6x6x8mm and run the 8mm to the TB and then the 2 6's to each of the BOV's. I am pretty sure its a 6mm. It is whatever Sasha includes in his Boosted Performance Kit.
__________________
2007 Chevy Duramax - EFILive Tuned By Me
2010 40th W/ Nav - Boosted Performance - UpRev Tuned By Me
The Mrs. Ride -2012 335XI N55 BMW - Cobb Tuned By Me, Built by her
My Build --> http://www.the370z.com/members-370z-...39s-build.html
Mitco39 is offline   Reply With Quote
Old 04-24-2013, 05:34 PM   #8 (permalink)
Base Member
 
Join Date: Mar 2011
Location: unknown
Posts: 177
Drives: twinturbo 370z
Rep Power: 14
hindi1973 is on a distinguished road
Default

Temco , Thanks alot bro to clear up things , I just wish more ppl with experience can join to let me know if i have to cancel my old tap or is it ok to to run a hose and T it with the new Tap after the tb similar to yours , Dont you think yours is abit far away from the tb ? And it should be right after the tb ? As gtm specifies in their manual ? I tapped mine following the manual but i guess i saw it from the wrong angle and drilled behind the tb instead of after
hindi1973 is offline   Reply With Quote
Old 04-24-2013, 06:01 PM   #9 (permalink)
The370Z.com Sponsor
 
Boosted Performance's Avatar
 
Join Date: Feb 2010
Location: Edmonton, AB
Posts: 1,629
Drives: Z's
Rep Power: 3382
Boosted Performance has a reputation beyond reputeBoosted Performance has a reputation beyond reputeBoosted Performance has a reputation beyond reputeBoosted Performance has a reputation beyond reputeBoosted Performance has a reputation beyond reputeBoosted Performance has a reputation beyond reputeBoosted Performance has a reputation beyond reputeBoosted Performance has a reputation beyond reputeBoosted Performance has a reputation beyond reputeBoosted Performance has a reputation beyond reputeBoosted Performance has a reputation beyond repute
Default

6mm is the nipple size an all tial BOV's and wastegates. Since the BOV works on vacuum you need to have the source for it after the TB (anywhere after the TB). Keeping in mind that the shorter the hose the better. Having a T is fine as well. The wastegate source should be taken before the TB since it works on pressure and should not see vacuum.
__________________
750WHP starting @ $7,500 to the door
FOR DETAILS VISIT: http://www.the370z.com/members/boosted-performance.html
FB: https://www.facebook.com/Boosted-Per...6303179791462/
IG @boostedperformanceyeg
Boosted Performance is offline   Reply With Quote
Old 04-24-2013, 06:14 PM   #10 (permalink)
Base Member
 
Join Date: Mar 2011
Location: unknown
Posts: 177
Drives: twinturbo 370z
Rep Power: 14
hindi1973 is on a distinguished road
Default

boostedperformance , thanks so running the hoses from both behind and after the tb te'd together directly to the bov will not affect the bov ? since usually ppl run one source only , the only reason i want to t them is its a hassle now closing the hole i made before the tb so the easiest way is use it and connect it to the new tap after the tb .

thanks


kindly check you pm since i sent loads before.

thanks
hindi1973 is offline   Reply With Quote
Old 04-24-2013, 09:14 PM   #11 (permalink)
The370Z.com Sponsor
 
Boosted Performance's Avatar
 
Join Date: Feb 2010
Location: Edmonton, AB
Posts: 1,629
Drives: Z's
Rep Power: 3382
Boosted Performance has a reputation beyond reputeBoosted Performance has a reputation beyond reputeBoosted Performance has a reputation beyond reputeBoosted Performance has a reputation beyond reputeBoosted Performance has a reputation beyond reputeBoosted Performance has a reputation beyond reputeBoosted Performance has a reputation beyond reputeBoosted Performance has a reputation beyond reputeBoosted Performance has a reputation beyond reputeBoosted Performance has a reputation beyond reputeBoosted Performance has a reputation beyond repute
Default

No, you do not T them together. This will render the manifold port useless and the BOV will not function properly. The port before the TB should go to the wastegate(s).
__________________
750WHP starting @ $7,500 to the door
FOR DETAILS VISIT: http://www.the370z.com/members/boosted-performance.html
FB: https://www.facebook.com/Boosted-Per...6303179791462/
IG @boostedperformanceyeg
Boosted Performance is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Help finding always on power source Blizzard Exterior & Interior 16 04-07-2023 02:22 PM
SSR Wheels @Source,LLC Source,LLC Tires/Wheels 269 08-28-2014 09:38 AM
All Your Brakes Needs @ Source,LLC Source,LLC Suspension/Brakes 351 07-02-2014 04:26 PM
SSR Wheels @Source,LLC Source,LLC The Source LLC 0 01-23-2013 08:42 PM
Source for LED lighting? Pat C. Exterior & Interior 13 03-24-2012 09:02 AM


All times are GMT -5. The time now is 01:05 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2