Nissan 370Z Forum

Nissan 370Z Forum (http://www.the370z.com/)
-   Forced Induction (http://www.the370z.com/forced-induction/)
-   -   GTM Supercharger - I need a power steering hose (http://www.the370z.com/forced-induction/90766-gtm-supercharger-i-need-power-steering-hose.html)

wind.zero 06-02-2014 05:13 PM

GTM Supercharger - I need a power steering hose
 
I put my car back to stock, long story. I returned everything back to stock myself.

One of the things missing :ugh2: from the original install at the shop (I specifically asked that all OEM parts be kept) was one of the high pressure power steering lines that connects to the eye bolt on the power steering pump and runs down to the frame hard line. It is well documented in the GTM install instructions. If you self installed your kit, you will definitely remember removing this hose.

I tried to order it from 2 different OEM Nissan parts suppliers and they both said the part "is not available" from Nissan. I tried to order it online twice and the orders were canceled.

I called GTM looking for customer take offs, and Sam said they did not have any.

Does anyone who self installed their SC kits willing to sell me the hose?

The pictures below show where the hose connects at the PS pump and then down on the frame hard line.

Thanks

Picture of the eye bolt connection at the PS pump:
http://www.the370z.com/members/wind-...79431-pseb.jpg

Picture of the connect at the frame hard line:
http://www.the370z.com/members/wind-...79432-psst.jpg

Infidel 06-02-2014 07:12 PM

If I can find mine it's yours. I have a big box of sh!t I have to stare at in my garage. Give me a few.

wind.zero 06-02-2014 07:22 PM

Quote:

Originally Posted by Infidel (Post 2844011)
If I can find mine it's yours. I have a big box of sh!t I have to stare at in my garage. Give me a few.

http://www.the370z.com/members/wind-...9445-sweet.gif

wind.zero 06-03-2014 09:17 AM

Just for reference, this is what the hose should look like in the picture below.

You will have removed the pressure sensor and installed it on a GTM aluminum adapter at the power steering pump. So your hose will not have the sensor.

The other end disconnected at a rubber isolation mount on the frame rail.

So the entire hose I am looking for will look like this one with the orange arrows:
http://www.the370z.com/members/wind-...452-pshose.jpg

Infidel 06-03-2014 10:56 AM

Cool, I've been doing some running around this morning and once I get something to eat I'll go out to the garage and look for it. I think I found it last night I just have to compare to pics.



Quote:

Originally Posted by wind.zero (Post 2844612)
Just for reference, this is what the hose should look like in the picture below.

You will have removed the pressure sensor and installed it on a GTM aluminum adapter at the power steering pump. So your hose will not have the sensor.

The other end disconnected at a rubber isolation mount on the frame rail.

So the entire hose I am looking for will look like this one with the orange arrows:
http://www.the370z.com/members/wind-...452-pshose.jpg



All times are GMT -5. The time now is 12:19 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2