GTM Performance Engineering: MHI Twin Turbo Official Release

Dzel · 12-19-2013, 09:40 PM

Ak doesn't make an appearance just for any one.

Sent with TapAhoe

Dzel · 12-19-2013, 09:43 PM

I brought my point up to ak and he took care of it. He along with trip saw my point and got you guys a long awaited update.

The fact that they didn't try to ban me reinstated my faith in this community and the forum.

Sent with TapAhoe

Dzel · 12-19-2013, 09:58 PM

With that said Alk you've single handedly turned this thread into a pissing match. Keep in mind the last 6 months on this thread I along with Spohn and Baer are the ones that kept this thread alive. Not with bickering with questions, plans, and updates that we would receive through GTM.

Now have you noticed how the dynamic of this thread has turned since we've backed out?

I'll make it easy for everyone if you went with the lay away contract that has no date of delivery and you choose to back out. You WILL pay the restocking fees. If you signed no such thing and paid in full you'll get your full refund back. No arguing, no pissing contest. That's just how it is. Customer service sucks... yeah we know that.

But I'm still very excited to see this kit distributed and applied. I can't wait to see the rewards of the guys patience that stuck it out.

Sent with TapAhoe

Alkatraz · 12-19-2013, 10:52 PM

Quote:

Originally Posted by Dzel

With that said Alk you've single handedly turned this thread into a pissing match. Keep in mind the last 6 months on this thread I along with Spohn and Baer are the ones that kept this thread alive. Not with bickering with questions, plans, and updates that we would receive through GTM.

Now have you noticed how the dynamic of this thread has turned since we've backed out?

I'll make it easy for everyone if you went with the lay away contract that has no date of delivery and you choose to back out. You WILL pay the restocking fees. If you signed no such thing and paid in full you'll get your full refund back. No arguing, no pissing contest. That's just how it is. Customer service sucks... yeah we know that.

But I'm still very excited to see this kit distributed and applied. I can't wait to see the rewards of the guys patience that stuck it out.

The part in bold I can completely agree with. That was my point from the very beginning.

The rest I really hope that you are joking about. You are correct though, once a certain few of you pulled out the dynamic of the thread DID completely change for the worse. Think about that fact for a minute.

It changed from useful information being provided to people involved in the group buy to random negative comments (from people not or no longer involved in he GB) complaining about the delays and just generally attacking GTM.

A few people, including admins agreed with me but it still never changed. I can see that it wont change so I'll just go back to being a casual observer and hope that some useful info gets posted up every now and then.

Dzel · 12-20-2013, 06:48 AM

Thank you that's all we were asking for.

Sent with TapAhoe

BlkNismo · 12-22-2013, 12:55 PM

whats your thoughts on upgrading the fuel pump wiring to a thicker gauge with its own relay. Is this necessary below 500whp? Do it for peace of mind?

And what about the CJM stage 0 fuel return kit?

Any thoughts?

puckshaw · 12-22-2013, 01:38 PM

Quote:

Originally Posted by BlkNismo

whats your thoughts on upgrading the fuel pump wiring to a thicker gauge with its own relay. Is this necessary below 500whp? Do it for peace of mind?

And what about the CJM stage 0 fuel return kit?

Any thoughts?

I just did the fuel pump relay yesterday. $30 in parts. Might as well do it since it's so cheap and easy.

BlkNismo · 12-22-2013, 03:31 PM

Quote:

Originally Posted by puckshaw

I just did the fuel pump relay yesterday. $30 in parts. Might as well do it since it's so cheap and easy.

Where did you order? GTM kit is around 70.

What about the fuel return kit?

puckshaw · 12-22-2013, 03:33 PM

Quote:

Originally Posted by BlkNismo

Where did you order? GTM kit is around 70.

What about the fuel return kit?

Just pieced it together at an auto parts store. Just need a relay, wire, fuse holder, and end connections. Didn't do the fuel return kit.

m3chhawk · 12-22-2013, 04:06 PM

Quote:

Originally Posted by BlkNismo

Where did you order? GTM kit is around 70.

What about the fuel return kit?

Don't order the GTM kit. I can't find the link right now, but they just use another relay kit that is $35-$40 retail, add a fuse holder, and sell it for $70.

I am going to buy the stuff to do the relay today and will do a DIY write-up for it in the next couple of weeks.

Dzel · 12-22-2013, 05:48 PM

Noice!

Sent with TapAhoe

CodeDrk · 12-26-2013, 09:29 PM

any? updates?

Alstann · 12-26-2013, 09:32 PM

The update I want to hear is that the cast parts have a final quality check that is good, and they are on the way, and that the pipes are being hammered out good.

Alkatraz · 12-26-2013, 11:17 PM

I'm sticking to my Super Bowl (at best) time frame for shipment. I wouldn't expect much to be done over Christmas/New Years.

Nixlimited · 12-27-2013, 11:15 AM

Going into month 13 without my car, I sure hope it's before superbowl.

12-19-2013, 09:40 PM	#1 (permalink)
Dzel A True Z Fanatic Join Date: May 2011 Location: Midland, TX Posts: 3,884 Drives: 11 370Z PW M6 Rep Power: 25	Ak doesn't make an appearance just for any one. Sent with TapAhoe __________________ 10secWS6 IF YOU CAN'T SWING IT THEN DON'T BRING IT! Check out Domestic Performance C.C.

12-19-2013, 09:43 PM	#2 (permalink)
Dzel A True Z Fanatic Join Date: May 2011 Location: Midland, TX Posts: 3,884 Drives: 11 370Z PW M6 Rep Power: 25	I brought my point up to ak and he took care of it. He along with trip saw my point and got you guys a long awaited update. The fact that they didn't try to ban me reinstated my faith in this community and the forum. Sent with TapAhoe __________________ 10secWS6 IF YOU CAN'T SWING IT THEN DON'T BRING IT! Check out Domestic Performance C.C.

12-19-2013, 09:58 PM	#3 (permalink)
Dzel A True Z Fanatic Join Date: May 2011 Location: Midland, TX Posts: 3,884 Drives: 11 370Z PW M6 Rep Power: 25	With that said Alk you've single handedly turned this thread into a pissing match. Keep in mind the last 6 months on this thread I along with Spohn and Baer are the ones that kept this thread alive. Not with bickering with questions, plans, and updates that we would receive through GTM. Now have you noticed how the dynamic of this thread has turned since we've backed out? I'll make it easy for everyone if you went with the lay away contract that has no date of delivery and you choose to back out. You WILL pay the restocking fees. If you signed no such thing and paid in full you'll get your full refund back. No arguing, no pissing contest. That's just how it is. Customer service sucks... yeah we know that. But I'm still very excited to see this kit distributed and applied. I can't wait to see the rewards of the guys patience that stuck it out. Sent with TapAhoe __________________ 10secWS6 IF YOU CAN'T SWING IT THEN DON'T BRING IT! Check out Domestic Performance C.C.

12-20-2013, 06:48 AM	#5 (permalink)
Dzel A True Z Fanatic Join Date: May 2011 Location: Midland, TX Posts: 3,884 Drives: 11 370Z PW M6 Rep Power: 25	Thank you that's all we were asking for. Sent with TapAhoe __________________ 10secWS6 IF YOU CAN'T SWING IT THEN DON'T BRING IT! Check out Domestic Performance C.C.

12-22-2013, 05:48 PM	#11 (permalink)
Dzel A True Z Fanatic Join Date: May 2011 Location: Midland, TX Posts: 3,884 Drives: 11 370Z PW M6 Rep Power: 25	Noice! Sent with TapAhoe __________________ 10secWS6 IF YOU CAN'T SWING IT THEN DON'T BRING IT! Check out Domestic Performance C.C.

12-22-2013, 12:55 PM	#6 (permalink)
BlkNismo Track Member Join Date: Sep 2011 Location: USA Posts: 614 Drives: Nismo Rep Power: 16	whats your thoughts on upgrading the fuel pump wiring to a thicker gauge with its own relay. Is this necessary below 500whp? Do it for peace of mind? And what about the CJM stage 0 fuel return kit? Any thoughts?

12-26-2013, 09:29 PM	#12 (permalink)
CodeDrk Base Member Join Date: Jul 2012 Location: Chicago Posts: 208 Drives: 04 370z B M6 Rep Power: 14	any? updates?

12-26-2013, 09:32 PM	#13 (permalink)
Alstann Track Member Join Date: Oct 2011 Location: South Florida Posts: 882 Drives: 12 PW 370z 6MT Sport Rep Power: 16	The update I want to hear is that the cast parts have a final quality check that is good, and they are on the way, and that the pipes are being hammered out good. __________________ 2012 Pearl White 370Z GReddy Twin Turbo

12-26-2013, 11:17 PM	#14 (permalink)
Alkatraz Base Member Join Date: May 2013 Location: Perth Posts: 215 Drives: 2008 Skyline 370GT Rep Power: 14	I'm sticking to my Super Bowl (at best) time frame for shipment. I wouldn't expect much to be done over Christmas/New Years.

12-27-2013, 11:15 AM	#15 (permalink)
Nixlimited A True Z Fanatic Join Date: Aug 2009 Location: San Diego Posts: 1,235 Drives: 15 GT-R / 11 Prius Rep Power: 27	Going into month 13 without my car, I sure hope it's before superbowl. __________________ Car Sold! Pleasure being a part of the Z community. New ride: 2015 GT-R - 647 WHP / 641 WTQ (e85) & 543 WHP / 519 WTQ (91)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GTM Performance Engineering 370Z SUPERCHARGER KIT PRESS RELEASE	SAM@GTM	Forced Induction	1161	02-16-2014 08:21 PM
GTM Performance Engineering: Mild 7 A/T Twin Turbo Build	SAM@GTM	Forced Induction	37	12-11-2013 12:23 PM
GTM Performance Engineering: 370Z MHI Twin Turbo Pre-Release	SAM@GTM	Forced Induction	120	09-06-2013 06:21 PM
GTM Performance Engineering stage 2 600hp supercharger kits line-up press release	SAM@GTM	Forced Induction	305	09-27-2012 03:23 PM