GTM Performance Engineering: MHI Twin Turbo Official Release

khanhvu411 · 06-02-2013, 10:20 PM

Thats good to kniw. Now I am just waiting for the installation manual to see if I can do it in my garage with jack stands.

Footloose301 · 06-03-2013, 06:50 AM

Anybody know if we can unbolt the header from the top/bottom and pull it out thru the top? If it must come thru the bottom then we'll probably have to disassemble some of the front suspension I'm guessing.

SPOHN · 06-03-2013, 09:55 AM

Quote:

Originally Posted by Footloose301

Anybody know if we can unbolt the header from the top/bottom and pull it out thru the top? If it must come thru the bottom then we'll probably have to disassemble some of the front suspension I'm guessing.

It will have to come out threw the bottom. On the drivers side you wil have to unbolt the steering knuckle.

Sh0velMan · 06-03-2013, 09:58 AM

Quote:

Originally Posted by SPOHN

It will have to come out threw the bottom. On the drivers side you wil have to unbolt the steering knuckle.

Yeah, it's one bolt then you can slide the steering shaft up towards the firewall, it'll collapse in on itself and stay out of the way until you're ready to re-attach it.

Oh, and be sure not to turn your steering wheel while it is detached. You'll mess up your steering position sensor's reference range and have to detach the shaft again and re-set it to centered.

(Gutted folks like Spohn and I don't need to worry about this as we've already ditched that sensor)

Cell · 06-08-2013, 11:18 AM

Quote:

Originally Posted by SPOHN

It will have to come out threw the bottom. On the drivers side you wil have to unbolt the steering knuckle.

No idea if this is what Sam referred too but in his pre-release thread, he mentioned that the steering coupler is untouched. Not sure if he means the same thing as the steering knuckle.

GTM Performance Engineering: 370Z MHI Twin Turbo Pre-Release

SPOHN · 06-08-2013, 01:20 PM

Quote:

Originally Posted by Dzel

I was just going to pick some up from the dealership. GTR plugs that is.

Sent with TapAhoe

Yeah I just went ahead and set the spark plug gap at .033.

Quote:

Originally Posted by Cell

No idea if this is what Sam referred too but in his pre-release thread, he mentioned that the steering coupler is untouched. Not sure if he means the same thing as the steering knuckle.

GTM Performance Engineering: 370Z MHI Twin Turbo Pre-Release

I'm not positive but what I think he may be applying is that it will not be modified or changed any form or fashion like his other kits And not the removal of the stock manifold in which it is in the way. It's just a lot easier when removed.

Chuck33079 · 06-03-2013, 04:50 PM

A page or two back the RTPs were discussed. They're not recommended.

Footloose301 · 06-03-2013, 04:50 PM

It's suggested that you get regular test pipes, NOT resonated.

megalapagas · 06-03-2013, 05:05 PM

aww dammit guess i have to call F.I, Thx Guys.

Dzel · 06-03-2013, 07:10 PM

Paid in full! Can't wait! Woot!!!!

Sent with TapAhoe

BlkNismo · 06-03-2013, 09:06 PM

I'd like to know the cost for these possible options on the turn key kit.

Hks ssqv bovs
catted downpipe
external wastegates

Dzel · 06-03-2013, 10:52 PM

You'll have better luck emailing Mike with your questions info@gtm.com.

Sent with TapAhoe

Alkatraz · 06-04-2013, 04:00 AM

Seeing as it was mentioned a little while back that the kits would be shipped out on a first come, first served basis, I think that a list showing who has paid and in what order would be useful.

Actually, it wouldn't be that useful at all, I just want to know whether I am near the top and will have a chance to be one of the first to start installing :P

SAM@GTM · 06-04-2013, 04:16 AM

Quote:

Originally Posted by Alkatraz

Seeing as it was mentioned a little while back that the kits would be shipped out on a first come, first served basis, I think that a list showing who has paid and in what order would be useful.

Actually, it wouldn't be that useful at all, I just want to know whether I am near the top and will have a chance to be one of the first to start installing :P

You are in the top 10 of the list.

Sam

Alkatraz · 06-04-2013, 06:17 AM

Quote:

Originally Posted by SAM@GTM

You are in the top 10 of the list.

Sam

Now that's what I like to hear!!!

Just remember to take the different timezone into account when it ships. Australia is like 5 days ahead of the US so you will need to ship VERY early! :P

06-03-2013, 06:50 AM	#2 (permalink)
Footloose301 A True Z Fanatic Join Date: Apr 2010 Location: Naples, FL Posts: 2,659 Drives: 40th Rep Power: 23	Anybody know if we can unbolt the header from the top/bottom and pull it out thru the top? If it must come thru the bottom then we'll probably have to disassemble some of the front suspension I'm guessing. __________________ 2010 40th Anniversary 370Z

06-03-2013, 04:50 PM	#7 (permalink)
Chuck33079 A True Z Fanatic Join Date: Nov 2011 Location: Houston Posts: 12,265 Drives: 2011 370ztt Rep Power: 29540	A page or two back the RTPs were discussed. They're not recommended. __________________ 2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

06-03-2013, 04:50 PM	#8 (permalink)
Footloose301 A True Z Fanatic Join Date: Apr 2010 Location: Naples, FL Posts: 2,659 Drives: 40th Rep Power: 23	It's suggested that you get regular test pipes, NOT resonated. __________________ 2010 40th Anniversary 370Z

06-03-2013, 07:10 PM	#10 (permalink)
Dzel A True Z Fanatic Join Date: May 2011 Location: Midland, TX Posts: 3,884 Drives: 11 370Z PW M6 Rep Power: 25	Paid in full! Can't wait! Woot!!!! Sent with TapAhoe __________________ 10secWS6 IF YOU CAN'T SWING IT THEN DON'T BRING IT! Check out Domestic Performance C.C.

06-03-2013, 10:52 PM	#12 (permalink)
Dzel A True Z Fanatic Join Date: May 2011 Location: Midland, TX Posts: 3,884 Drives: 11 370Z PW M6 Rep Power: 25	You'll have better luck emailing Mike with your questions info@gtm.com. Sent with TapAhoe __________________ 10secWS6 IF YOU CAN'T SWING IT THEN DON'T BRING IT! Check out Domestic Performance C.C.

06-02-2013, 10:20 PM	#1 (permalink)
khanhvu411 Base Member Join Date: Sep 2012 Location: houston Posts: 144 Drives: 2010 370z Roadster Rep Power: 14	Thats good to kniw. Now I am just waiting for the installation manual to see if I can do it in my garage with jack stands.

06-03-2013, 05:05 PM	#9 (permalink)
megalapagas Enthusiast Member Join Date: May 2013 Location: McAllen,TX Posts: 457 Drives: '10 370Z Tour A/T Rep Power: 14	aww dammit guess i have to call F.I, Thx Guys.

06-03-2013, 09:06 PM	#11 (permalink)
BlkNismo Track Member Join Date: Sep 2011 Location: USA Posts: 614 Drives: Nismo Rep Power: 16	I'd like to know the cost for these possible options on the turn key kit. Hks ssqv bovs catted downpipe external wastegates

06-04-2013, 04:00 AM	#13 (permalink)
Alkatraz Base Member Join Date: May 2013 Location: Perth Posts: 215 Drives: 2008 Skyline 370GT Rep Power: 14	Seeing as it was mentioned a little while back that the kits would be shipped out on a first come, first served basis, I think that a list showing who has paid and in what order would be useful. Actually, it wouldn't be that useful at all, I just want to know whether I am near the top and will have a chance to be one of the first to start installing :P

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GTM Performance Engineering 370Z SUPERCHARGER KIT PRESS RELEASE	SAM@GTM	Forced Induction	1161	02-16-2014 08:21 PM
GTM Performance Engineering: Mild 7 A/T Twin Turbo Build	SAM@GTM	Forced Induction	37	12-11-2013 12:23 PM
GTM Performance Engineering: 370Z MHI Twin Turbo Pre-Release	SAM@GTM	Forced Induction	120	09-06-2013 06:21 PM
GTM Performance Engineering stage 2 600hp supercharger kits line-up press release	SAM@GTM	Forced Induction	305	09-27-2012 03:23 PM