Nissan 370Z Forum

Nissan 370Z Forum (http://www.the370z.com/)
-   Forced Induction (http://www.the370z.com/forced-induction/)
-   -   GTM Performance Engineering: MHI Twin Turbo Official Release (http://www.the370z.com/forced-induction/68491-gtm-performance-engineering-mhi-twin-turbo-official-release.html)

Alkatraz 12-16-2013 07:36 PM

Quote:

Originally Posted by DEpointfive0 (Post 2612520)
At least people want that kit and it's easy to sell to the next guy with little to no loss, lol

If FI had a kit for the G37 and RHD then i probably would have gone for this after about 6 months of delays. The full exhaust that I have from Tony is picture perfect and I would expect the TT kit to be the same!

KN21283 12-16-2013 07:37 PM

Gtm burnt themselves on this group buy.

1slow370 12-16-2013 07:37 PM

that's if they will give you the deposit back when you get the order transferred. Companies charging for preorder fees, non refundable deposits, restocking fees, it's all the same it's a don't change your mind fee whatever you call it. And i totally disagree DE about companies not charging r&d costs under deposits, I work in manufacturing, and NEVER have i outsourced something to any shop and not gotten charged a setup, programming, or tooling fee. Often the setup fees can cost more than the entire batch of parts. We used to deal with cast aluminum housings for paper core shafts and each of the 9000 11lb housings were $15, but the setup fee was $1.5mil. I wonder what gtm had to pay in mold fees considering they are casting 6 different parts for the manifolds and turbo outlets. Especially considering they only have like 10 people that have still paid. Fraud omg the amount you guys have paid them probably doesn't come close to what they have paid for the parts just to get setup.

DEpointfive0 12-16-2013 07:45 PM

Quote:

Originally Posted by 1slow370 (Post 2612544)
that's if they will give you the deposit back when you get the order transferred. Companies charging for preorder fees, non refundable deposits, restocking fees, it's all the same it's a don't change your mind fee whatever you call it. And i totally disagree DE about companies not charging r&d costs under deposits, I work in manufacturing, and NEVER have i outsourced something to any shop and not gotten charged a setup, programming, or tooling fee. Often the setup fees can cost more than the entire batch of parts. We used to deal with cast aluminum housings for paper core shafts and each of the 9000 11lb housings were $15, but the setup fee was $1.5mil. I wonder what gtm had to pay in mold fees considering they are casting 6 different parts for the manifolds and turbo outlets. Especially considering they only have like 10 people that have still paid. Fraud omg the amount you guys have paid them probably doesn't come close to what they have paid for the parts just to get setup.

We are in manufacturing too, but you can't pawn off the cost of your investment to the customer when you don't have a product.
Companies lose money, shít happens. I wouldn't lose my integrity over $500 when my company is the size of GTM's

Maybe it's just the way I do business, I don't see it like that

Alkatraz 12-16-2013 07:46 PM

Quote:

Originally Posted by elperuano (Post 2612504)
I'm not referring to where you live. Who cares where u live?
You're the only one defending the company that has your money that doesn't tell u anything or update you on the progress. Did u look around and see anyone else defending? You're all alone. You like to be left in the dark? Cool. Not people here in 'Murica. We work hard for our money.

Oooooooooh ok lol. Now I get it. Australia being an island, i thought that you were having a go at that. We're just as patriotic as you guys so I got my back up.

I think that you are looking at my comments incorrectly. I am not defending anyone. I am just looking at the entire situation and can see where the mistakes are being made but don't agree with people attacking the company with incorrect facts and random statements. Especially people who are not actually involved in the GB.

GTM have stuffed up big time. Their communication sucks. They will lose business because of this. They could handle this MUCH better. All that being said, i don't think that they are purposely ripping anyone off or trying to take anyones money.

The knives have apparently now come out and some people are just posting up ridiculous comments trying to make GTM look bad. Some of it is well directed but there is an awful lot that is just petty and childish.

Alkatraz 12-16-2013 08:00 PM

Quote:

Originally Posted by DEpointfive0 (Post 2612560)
We are in manufacturing too, but you can't pawn off the cost of your investment to the customer when you don't have a product.
Companies lose money, shít happens. I wouldn't lose my integrity over $500 when my company is the size of GTM's

Maybe it's just the way I do business, I don't see it like that

You need to understand that we have paid GTM to purchase some parts and manufacture others and then deliver them to us. If we ask them to do this, they go out and start doing it, then we change our mind and pull out, then GTM most certainly have the right to ask for some compensation to cover the costs of the parts that they have already purchased on our behalf.

Due to the fact that this is a 'kit' you could argue that the entire kit is one part so technically if they don't deliver the whole thing, then they cant charge a restocking fee on the individual parts. Im not 100% sure how this would legally in the US but my invoice lists each individual part (to a point) and its price so its not really one single product.

Due to the delays, I would personally be pissed off if they asked for 'restocking fee'. The way that i do business, i would take that on the chin, right it off to save face and not piss off my client base. GTM chose not to do it the same way that I would and that is completely ok. It will lose them business in the long run but they base their business decisions on their own situation and their own mindsets.

Im late for work now so i just have one more comment then Im out.

Gimme my TT kit!!!!!! :)

SS_Firehawk 12-16-2013 08:00 PM

Just an FYI, it took them 6 weeks to reply back about my inquiry on my current kit. TThey are slow both ways. Sucks to see you guys having issues on refunds. Hope it gets cleared up, for both parties sake.

elperuano 12-16-2013 08:04 PM

Understood.

A lot of the people who are chiming in were in the group buy or have dealt directly. It probably is getting out of hand but it's not one sided. There's plenty of blame to go around. But it starts at the top. people can only tolerate waiting in the dark for so long before they start to pop. Spohn was a big fan and everyonr has their limits. Just ashame to see what's happening in the FI community.

I'm sure this has caused doubt for a lot of people to go FI. Hell to even be apart of another group buy. I hope everything gets resolved soon.

Chuck33079 12-16-2013 08:13 PM

Quote:

Originally Posted by Alkatraz (Post 2612594)
Due to the delays, I would personally be pissed off if they asked for 'restocking fee'. The way that i do business, i would take that on the chin, right it off to save face and not piss off my client base. GTM chose not to do it the same way that I would and that is completely ok. It will lose them business in the long run but they base their business decisions on their own situation and their own mindsets.

:iagree:

I just think that charging a restocking fee in light of the rest of this debacle is pretty weak. It's in the contract, but sometimes you gotta let some **** slide.

SPOHN 12-16-2013 08:37 PM

I have an idea. Either get out of the group and go on your way. Or stay in and wait with no complaints. It's obvious what GTM is about. Deal with it or not. FI is not the end of the world.

If you request money call GTM and make an agreement. If that fails take extreme actions.

Alkatraz 12-16-2013 08:54 PM

Quote:

Originally Posted by Chuck33079 (Post 2612610)
:iagree:

I just think that charging a restocking fee in light of the rest of this debacle is pretty weak. It's in the contract, but sometimes you gotta let some **** slide.

Totally agree 100% Chuck.

Some people jumped on this as if GTM had done something illegal and that everyone should be up in arms for their despicable actions. Weak it may be but unexpected? Not at all.

The 'restocking fee' was written into the contract to protect GTM in the case that people who have not paid fully upfront pull out of the deal. Its all about risk management and people who pay 100% upfront are far less likely to pull out than people who go with a layaway deal or finance. Hence GTM add 25% clause to try to protect themselves from this. It reduces the risk of people who have less invested up-front, pulling out. This is common business practice all over the world and there is absolutely nothing wrong with it at all.

In the light of the delays, GTM had the choice to waive this fee but chose not to. That's their choice and a mix of financial situation and business practice is what would drive this choice. The purchaser knew about this potential cost up-front, was not purposely mislead in any way and unfortunately when things were delayed (MASSIVELY), ended up having to wear it due to his decision to pull out.

The biggest disappointment for me is purely the communication from GTM. They have definitely come to the party and partially made up for the delays by upgrading to the Garrett turbo's, which add's HUGE value to the kits. If they could just find a way to spend a little more time speaking with their clients, then this would all be a non-event and EVERYONE would still be excited about getting their kits.

Personally, once I am spending my days shredding tires on the highway in third gear, all of this crap will be well and truly forgotten! Eyes on the prize everyone! Eyes on the prize! :)

KN21283 12-16-2013 09:03 PM

"Restocking fee?":roflpuke2::roflpuke2::roflpuke2:

puckshaw 12-16-2013 09:08 PM

For the record, I don't believe GTM is intentionally holding my money or trying to rip me off. I just think they completely dropped the ball on handling my refund and I'm sick of taking time out of my day week after week to call them and get the run around. I rarely can catch Sam, even rarer that I get I call back and forget about getting an email response. Every time I call I have to explain my situation. It's like they've never heard of me. Enough is enough. I'm letting my bank handle it from here.


Sent from my iPhone using Tapatalk

Alstann 12-16-2013 09:15 PM

This is blowing up way out of hand. :ugh2:

Not like we need more opinions flying around and whatnot - but honestly, in the grand scheme of things, I think this could simply be resolved if GTM chimes in, and gives us a two things

- Make sure refunds are issued properly and quickly, and sort those out first. That would help customer relations massively. If refunds go out, people will be more comfortable with leaving their money in GTM's hands, and other people who want to back out will have the choice to do so, and promptly.

- Give us an update on where they truly are with things. Honestly, if they were to tell us that the cast parts are not coming for another month or two, I personally would have no qualms about it. I understand that others would like their kits now, and it leaves them with the decision to back out or stay in it. For me, there is not currently another option of which I feel desirable with my budget. I am in no rush to have my car done - but I want to know when I can expect my kit, in a honest, no-bs answer.

Fast Intentions is obviously my other choice for a twin turbo kit. But it's also outside of my budget. I honestly still have faith in GTM - if they pull this off, they will have many happy owners of a kick-*** turbo kit, and lots of turbo Z's on the road. I honestly feel like this could be a pivotal point for our platform. Lots of new forced induction cars on the road, pushing limits and exploring new things.

COSMO 12-16-2013 09:20 PM

I have purchased over 20k in products from gtm back in the day when I had my 350z. It wasn't until I purchased my Stage II TT kit from that I learned that they were lacking in customer service. At the time I liked mike and sam very much but always seemed they were running around like chickens with theirs heads cut off and a simple phone conversation seemed rushed. After ordering my kit I was given a rough eta on a ship date in which was 2 months after that and having to threaten to cancel did I finally receive my kit. The driver side turbo was supposed to be clocked and I had to take apart the entire driver side to clock it into the right position. So I called gtm and spoke with mike and he swore up and down that no one had ever had any problems and it was only me. He also told me that my stillen exhaust would bolt up to their 3'' test pipes and they didn't, when I called again to let him know he just blew me off and suggested buying their 3'' exhaust. The point I am trying to make here is I once was a big gtm follower like spohn (no pun intended) but I soon learned they weren't all what they cracked up to be. Being warned from Trips I have stepped back and read this thread every day hoping something will happen one way or the other but it seems gtm is immune and the fact of the matter is I care about my fellow members here and just hate to see the way they have been treated. To me the question is, shouldn't paid sponsor's here be allowed to do this to members with no repercussions?? I feel for you guys and I hope this works out for you in a positive way..


All times are GMT -5. The time now is 02:34 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2