GTM Performance Engineering: MHI Twin Turbo Official Release

Dzel · 10-04-2013, 10:17 AM

I won't speak for others but I feel like I have entitlement to info especially when I paid in full. And I would actually call and email for the info I received I didn't just sit here and bitch

Sent with TapAhoe now Free

Baer383 · 10-04-2013, 10:19 AM

Quote:

Originally Posted by Chuck33079

Only you three seem to have been. I just don't think anyone should feel bad about their impatience. It's completely justified given the big picture. Now that the info is out, everyone has been very supportive of the GTM family. Again, you're entitled to your opinion on this, as am I. Neither of us are even a part of the group anyway.

EVERYBODY should be supportive of GTM they deliver a superior product and they don't rip anybody off, give away free stuff,and Sam has helped me numerous times in the past year including giving me a free tune when I swapped from my 2010 to my 2013 Nismo.

Chuck33079 · 10-04-2013, 10:20 AM

Quote:

Originally Posted by Baer383

EVERYBODY should be supportive of GTM they deliver a superior product and they don't rip anybody off, give away free stuff,and Sam has helped me numerous times in the past year including giving me a free tune when I swapped from my 2010 to my 2013 Nismo.

I agree with all of this, except I didn't get anything for free.

All I really wanted was a sticker or something.

puckshaw · 10-04-2013, 10:21 AM

Quote:

Originally Posted by Baer383

It is fair,me and Chris (SPOHN),Dzel have been hinting as much as we could b/c we were told not to say anything but most people did not want to listen to 3 established members so yes it is fair!

Give me a break. None of us knew what was going on and had every right to be asking for updates on a long overdue kit. You guys didn't give any real information. Stop acting like you're better than everyone else. "Established members"

Dzel · 10-04-2013, 10:23 AM

We are.

Sent with TapAhoe now Free

Baer383 · 10-04-2013, 10:25 AM

Quote:

Originally Posted by puckshaw

Give me a break. None of us knew what was going on and had every right to be asking for updates on a long overdue kit. You guys didn't give any real information. Stop acting like you're better than everyone else. "Established members"

Put some more posts up and you can be a established member,

You have the right to ask for updates but we were told not to say anything that is a hard line to stand on with the members on one side and GTM on the other we hinted as much as we could and yes all 3 of us have very good reps so you should have listened to us at least a little.

puckshaw · 10-04-2013, 10:26 AM

Quote:

Originally Posted by Dzel

I won't speak for others but I feel like I have entitlement to info especially when I paid in full. And I would actually call and email for the info I received I didn't just sit here and bitch

Sent with TapAhoe now Free

I sent several emails asking for an update and still haven't received a response after weeks of waiting. I've paid in full too. I've learned that calling them is apparently the only way to get info.

Dzel · 10-04-2013, 10:27 AM

Especially me cause I have been on every turbo thread/buy since last year! Lol

Sent with TapAhoe now Free

puckshaw · 10-04-2013, 10:34 AM

Quote:

Originally Posted by Baer383

Put some more posts up and you can be a established member,

You have the right to ask for updates but we were told not to say anything that is a hard line to stand on with the members on one side and GTM on the other we hinted as much as we could and yes all 3 of us have very good reps so you should have listened to us at least a little.

Having a big post count doesn't give someone any credibility in my book. It's the quality of the posts, not the quantity. Yeah I really should not have asked for updates after hearing your vague warnings

I have a right to know what's happening with a product I paid $7k for months ago. We all feel for Sam, but no one was in the wrong for wanting an update. Simple as that.

Baer383 · 10-04-2013, 10:44 AM

Quote:

Originally Posted by Baer383

Put some more posts up and you can be a established member,

You have the right to ask for updates but we were told not to say anything that is a hard line to stand on with the members on one side and GTM on the other we hinted as much as we could and yes all 3 of us have very good reps so you should have listened to us at least a little.

This is why you are still pissed off ,you can't read!!!

puckshaw · 10-04-2013, 10:48 AM

Quote:

Originally Posted by Baer383

This is why you are still pissed off ,you can't read!!!

I'm not pissed off. I was still responding to the fact that you said we should feel like ********. Let's move on.

Alkatraz · 10-04-2013, 10:50 AM

Quote:

Originally Posted by puckshaw

I'm not pissed off. I was still responding to the fact that you said we should feel like ********. Let's move on.

Quit feeding the troll. You cant win.

Dzel · 10-04-2013, 10:56 AM

Tololol

Sent with TapAhoe now Free

Dzel · 10-04-2013, 02:27 PM

Anyway I just called GTM and they said that you will not have to drill the upper oil pan you will be able to use the new oil pan system.

elperuano · 10-04-2013, 03:23 PM

Lol...

these "3" guys wanna get put up on a pedestal or something???? Cmon. This is business. Leave the heirarchy of "coolness" back in high school.

10-04-2013, 10:17 AM	#1666 (permalink)
Dzel A True Z Fanatic Join Date: May 2011 Location: Midland, TX Posts: 3,884 Drives: 11 370Z PW M6 Rep Power: 22	I won't speak for others but I feel like I have entitlement to info especially when I paid in full. And I would actually call and email for the info I received I didn't just sit here and bitch Sent with TapAhoe now Free Mkai0 and Chuck33079 like this. __________________ 10secWS6 IF YOU CAN'T SWING IT THEN DON'T BRING IT! Check out Domestic Performance C.C.

10-04-2013, 10:23 AM	#1670 (permalink)
Dzel A True Z Fanatic Join Date: May 2011 Location: Midland, TX Posts: 3,884 Drives: 11 370Z PW M6 Rep Power: 22	We are. Sent with TapAhoe now Free Baer383 and leighspped like this. __________________ 10secWS6 IF YOU CAN'T SWING IT THEN DON'T BRING IT! Check out Domestic Performance C.C.

10-04-2013, 10:27 AM	#1673 (permalink)
Dzel A True Z Fanatic Join Date: May 2011 Location: Midland, TX Posts: 3,884 Drives: 11 370Z PW M6 Rep Power: 22	Especially me cause I have been on every turbo thread/buy since last year! Lol Sent with TapAhoe now Free elperuano likes this. __________________ 10secWS6 IF YOU CAN'T SWING IT THEN DON'T BRING IT! Check out Domestic Performance C.C.

10-04-2013, 10:56 AM	#1678 (permalink)
Dzel A True Z Fanatic Join Date: May 2011 Location: Midland, TX Posts: 3,884 Drives: 11 370Z PW M6 Rep Power: 22	Tololol Sent with TapAhoe now Free __________________ 10secWS6 IF YOU CAN'T SWING IT THEN DON'T BRING IT! Check out Domestic Performance C.C.

10-04-2013, 02:27 PM	#1679 (permalink)
Dzel A True Z Fanatic Join Date: May 2011 Location: Midland, TX Posts: 3,884 Drives: 11 370Z PW M6 Rep Power: 22	Anyway I just called GTM and they said that you will not have to drill the upper oil pan you will be able to use the new oil pan system. __________________ 10secWS6 IF YOU CAN'T SWING IT THEN DON'T BRING IT! Check out Domestic Performance C.C.

10-04-2013, 03:23 PM	#1680 (permalink)
elperuano A True Z Fanatic Join Date: Oct 2011 Location: Southwest FL Posts: 1,374 Drives: G37S Rep Power: 28	Lol... these "3" guys wanna get put up on a pedestal or something???? Cmon. This is business. Leave the heirarchy of "coolness" back in high school. G37sHKS, Mkai0, Dzel and 1 others like this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GTM Performance Engineering 370Z SUPERCHARGER KIT PRESS RELEASE	SAM@GTM	Forced Induction	1161	02-16-2014 08:21 PM
GTM Performance Engineering: Mild 7 A/T Twin Turbo Build	SAM@GTM	Forced Induction	37	12-11-2013 12:23 PM
GTM Performance Engineering: 370Z MHI Twin Turbo Pre-Release	SAM@GTM	Forced Induction	120	09-06-2013 06:21 PM
GTM Performance Engineering stage 2 600hp supercharger kits line-up press release	SAM@GTM	Forced Induction	305	09-27-2012 03:23 PM