GTM Performance Engineering: MHI Twin Turbo Official Release

Chuck33079 · 10-03-2013, 09:10 PM

Quote:

Originally Posted by SS_Firehawk

Best of luck on Sam's recovery. It's terrible hearing more bad news since picking up mine a couple weeks ago. But what a great offer for these guys. That's fantastic! Who doesn't like free turbo upgrades?

That's a great deal for the guys in the group buy. Good job taking care of the customers.

SPOHN · 10-03-2013, 09:11 PM

Quote:

Originally Posted by Chuck33079

Wow. That's pretty damn scary. Glad he pulled through. That's something that can end you in a hurry. Pass along all of our best wishes.

It's crazy wild for sure. After talking to Sam a few days ago you can tell in his voice it's a life changing experience. Sam is a great guy and is very passionate about what he does. He will talk cars all day if not to busy. Sam and GTM as a hole are some true innovators for our cars. Not to mention Sam couldn't do it without is team.

So tower74 what's the here say on the Garrett turbo being ''used" or ''used on another subbie"?

Infidel · 10-03-2013, 09:44 PM

Being the turbo-tard that I am

....I will apologize in advance of this question.

I have a plain jane stock engine with tp's and exhaust. I had on order the 18g kit, so now going with the Garrett BB turbos I should get the GT2860RS with the 0.86 A/R turbine housing ???

SPOHN · 10-03-2013, 09:53 PM

Quote:

Originally Posted by Infidel

Being the turbo-tard that I am

....I will apologize in advance of this question.

I have a plain jane stock engine with tp's and exhaust. I had on order the 18g kit, so now going with the Garrett BB turbos I should get the GT2860RS with the 0.86 A/R turbine housing ???

yes

Dzel · 10-03-2013, 09:59 PM

Quote:

Originally Posted by m3chhawk

Well that's ironic (Garrett bb upgrade) given the conversation here today....

Anyway, there are things in life that are far more important than boost. Best of luck to Sam and a speedy recovery.

This decision had been made way before we had our little talk today. Either way your out.

Sent with TapAhoe now Free

Dzel · 10-03-2013, 10:00 PM

Sam will be in our prayers. Thanks Mike for the update. Sometimes we forget that vendors are real people to.

Sent with TapAhoe now Free

m3chhawk · 10-03-2013, 10:04 PM

Quote:

Originally Posted by Dzel

This decision had been made way before we had our little talk today. Either way your out.

Sent with TapAhoe now Free

Yes, I realize that... I was saying it was ironic because the ball bearing debate was started by someone "not in the know". Also, I was never in. I've been committed to my turbo build for awhile now. You know the one you were committed to before this one, but after the other one.

Enjoy your apparent sense of entitlement?

Dzel · 10-03-2013, 10:17 PM

Ow hawksausage let's not start trying to figure out who's wings are bigger than who's. Let's keep this on topic. With the people that matter which are the ones committed to this buy.

Sent with TapAhoe now Free

m3chhawk · 10-03-2013, 10:19 PM

lulz...

Jayhovah · 10-03-2013, 10:28 PM

Sounds like good news and good news with Sam's successful surgery and speedy recovery to go along with the free upgrade. Are all of us in the group buy eligible? I only joined 2 days ago!

Are there any drawbacks to going with the Garretts? I seem to remember a post that suggested using the Garretts might necessitate drilling the upper oil pan - any merit to that? Any other ways the layout of the kit might differ with the different turbos?

Great customer service! Really unbelievable.

zguynate · 10-03-2013, 10:56 PM

Quote:

Originally Posted by Jayhovah

Sounds like good news and good news with Sam's successful surgery and speedy recovery to go along with the free upgrade. Are all of us in the group buy eligible?

I seem to remember a post that suggested using the Garretts might necessitate drilling the upper oil pan - any merit to that? Any other ways the layout of the kit might differ with the different turbos?

Great customer service! Really unbelievable.

I would like to know this as well.

What a traumatic experience for Sam. I'm glad that he's ok and I hope he recovers quickly. Kudos to GTM for offering this as well.

Mr&Mrs · 10-03-2013, 11:29 PM

Best wishes to Sam and his recovery!

tower74 · 10-03-2013, 11:42 PM

Quote:

Originally Posted by Dzel

This decision had been made way before we had our little talk today. Either way your out.

Sent with TapAhoe now Free

That was me that was out.....

1slow370 · 10-04-2013, 01:01 AM

side note, that dual boost turbo is in use already, new ford superduty diesel v8 the 6.7 scorpion uses it.

SPOHN · 10-04-2013, 03:24 AM

And for the two guys that asked about the Garrett turbo oil return line. No you will not have to tap the upper oil pan. We will still be using the GTM oil baffle pan for our source of return.

10-03-2013, 10:00 PM	#1641 (permalink)
Dzel A True Z Fanatic Join Date: May 2011 Location: Midland, TX Posts: 3,884 Drives: 11 370Z PW M6 Rep Power: 22	Sam will be in our prayers. Thanks Mike for the update. Sometimes we forget that vendors are real people to. Sent with TapAhoe now Free SPOHN likes this. __________________ 10secWS6 IF YOU CAN'T SWING IT THEN DON'T BRING IT! Check out Domestic Performance C.C.

10-03-2013, 10:17 PM	#1643 (permalink)
Dzel A True Z Fanatic Join Date: May 2011 Location: Midland, TX Posts: 3,884 Drives: 11 370Z PW M6 Rep Power: 22	Ow hawksausage let's not start trying to figure out who's wings are bigger than who's. Let's keep this on topic. With the people that matter which are the ones committed to this buy. Sent with TapAhoe now Free __________________ 10secWS6 IF YOU CAN'T SWING IT THEN DON'T BRING IT! Check out Domestic Performance C.C.

10-03-2013, 10:19 PM	#1644 (permalink)
m3chhawk Track Member Join Date: Sep 2012 Location: Kansas City Posts: 878 Drives: '11 370Z SPT 6MT BLK Rep Power: 24	lulz... tower74 likes this. __________________ F.I. CF CBE \| Avant Garde M310 \| BC BR's \| ONEighty \| Status \| EvoR \| Stillen \| Whiteline \| B&M \| Bespoke Details Boosted Performance \| Precision Turbo \| Tial \| HKS \| Innovate Motorsports \| Bosch \| Treadstone \| Walbro \| UpRev \| Depo

10-03-2013, 11:29 PM	#1647 (permalink)
Mr&Mrs A True Z Fanatic Join Date: May 2010 Location: Tampa Posts: 4,194 Drives: RZ34 Rep Power: 18518	Best wishes to Sam and his recovery! Dzel likes this. __________________ Project Z <--Click - Check out the link too many mods to list!

10-04-2013, 01:01 AM	#1649 (permalink)
1slow370 A True Z Fanatic Join Date: Aug 2009 Location: In the D Posts: 3,732 Drives: v8 74 260z ;) Rep Power: 7250	side note, that dual boost turbo is in use already, new ford superduty diesel v8 the 6.7 scorpion uses it. __________________ ANSWER PRICE LIST Answers - - - - - - - - - - - - - - - - $0.75 Answers (requiring thought) - - - - $1.25 Answers (correct) - - - - - - - - - - $12.50

10-03-2013, 09:44 PM	#1638 (permalink)
Infidel Enthusiast Member Join Date: Mar 2013 Location: Central Florida Posts: 457 Drives: 2013 GM 6MT Rep Power: 14	Being the turbo-tard that I am ....I will apologize in advance of this question. I have a plain jane stock engine with tp's and exhaust. I had on order the 18g kit, so now going with the Garrett BB turbos I should get the GT2860RS with the 0.86 A/R turbine housing ???

10-03-2013, 10:28 PM	#1645 (permalink)
Jayhovah Premium Member Join Date: May 2013 Location: St. Pete, FL Posts: 3,848 Drives: 520whp Fire Breather Rep Power: 86950	Sounds like good news and good news with Sam's successful surgery and speedy recovery to go along with the free upgrade. Are all of us in the group buy eligible? I only joined 2 days ago! Are there any drawbacks to going with the Garretts? I seem to remember a post that suggested using the Garretts might necessitate drilling the upper oil pan - any merit to that? Any other ways the layout of the kit might differ with the different turbos? Great customer service! Really unbelievable.

10-04-2013, 03:24 AM	#1650 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 45 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	And for the two guys that asked about the Garrett turbo oil return line. No you will not have to tap the upper oil pan. We will still be using the GTM oil baffle pan for our source of return. Dzel likes this. __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GTM Performance Engineering 370Z SUPERCHARGER KIT PRESS RELEASE	SAM@GTM	Forced Induction	1161	02-16-2014 08:21 PM
GTM Performance Engineering: Mild 7 A/T Twin Turbo Build	SAM@GTM	Forced Induction	37	12-11-2013 12:23 PM
GTM Performance Engineering: 370Z MHI Twin Turbo Pre-Release	SAM@GTM	Forced Induction	120	09-06-2013 06:21 PM
GTM Performance Engineering stage 2 600hp supercharger kits line-up press release	SAM@GTM	Forced Induction	305	09-27-2012 03:23 PM