Nissan 370Z Forum
Page 3 of 6 12 3 45 Last »
Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)
-   Forced Induction (http://www.the370z.com/forced-induction/)
-   -   stillen supercharger to vsr top mounted turbo (http://www.the370z.com/forced-induction/67205-stillen-supercharger-vsr-top-mounted-turbo.html)

Nissan370 06-12-2013 06:05 PM
Almost there

http://i94.photobucket.com/albums/l1...612_173246.jpg

http://i94.photobucket.com/albums/l1...612_173352.jpg

LiquidCrewZ 06-13-2013 02:06 AM
Quote:
Originally Posted by SRperformance (Post 2348937)
T The owner of VSR has even arranged to fly out personally to help with the install.
Wow! That's impressive, might look your way down the road if I went turbo.

FireDan50 07-11-2013 05:23 PM
That kit on the car yet?

elperuano 07-11-2013 05:31 PM
^thissss

Nissan370 07-11-2013 09:08 PM
Workin on it. :shakes head: car is on its way to vsr motorsports

Dzel 07-11-2013 09:28 PM
Nice congrats bro!I was going to go this route before BP came out with the second wave of kits, but I would have to pay to much to have the car shipped. Then the MHI kit came out I and went that route.

Sent with TapAhoe

regulator11 07-11-2013 11:13 PM
This kit is amazing. I went wayyyy safe with he tune and I made 475 after 9 pulls and it was there and out within 4 days. I have nothing bad to say about this company and the performance speaks for itself. I am very glad I went single turbo over twin due to te amazing power band. You will enjoy the kit believe me!

Dzel 07-12-2013 08:30 AM
How much boost if you don't mind me asking?

Sent with TapAhoe

elperuano 07-12-2013 08:33 AM
Hopefully everything turns out good for you OP. Sounds like ur having no luck.

regulator11 07-12-2013 03:58 PM
8 pounds. They wanted to get me to 550 but I'm all about reliability. It was also like 90 degrees out.

Dzel 07-12-2013 05:22 PM
Nice numbers for only 8psi. Congrats!

Sent with TapAhoe

regulator11 07-12-2013 09:01 PM
Thanks. They felt safe at 10 but I was happy at 8

Nissan370 07-13-2013 10:47 PM
Vsr should get the car on Monday
Bobby is going to install the kit for dam near free because of the wait and problem i have been having real cool guy.

Nissan370 07-28-2013 08:00 PM
Ok the car is done and a very safe tune was added by vsr

I made a little less hp do to my lower compression but thats fine

523 /460@ the wheel at 10 psi with just 17 deg. Of timming

Thats up from 436/340 at 9psi on the stillen

Also looks like max boost is about 3800 rpms

Once i get the car and dyno back I will post the sheet

FireDan50 07-28-2013 08:06 PM
Nice. Yours is the Black Z right? Did you get your car back?

Nissan370 07-28-2013 08:11 PM
Not yet was going to fly down and drive back but cant get off work so I will be shipped to me some time this week

Nissan370 07-28-2013 08:14 PM
So time to clean up the stillen kit and put it up for sale

FireDan50 07-28-2013 08:22 PM
LoL I'm in the same boat as you. My white 370z had the Stillen kit but is at VSR now getting all that yanked out for their single turbo setup. I'm supposed to be flying down there hopefully this week to drive back :) There's not a lot of info/reviews on this here so I plan on doing a lot of photos, videos, and write-ups as soon as I can, just to help others out.

Nissan370 07-28-2013 08:51 PM
Same here once I get it back videos and pictures bobby put up a small video on his facebook page of the dyno

elperuano 07-28-2013 10:29 PM
That's great numbers for a safe conservative tune and 10 lbs. of boost.
Curious why did you stop at 10lbs? You're built motor and meth still correct? You barely scratching the surface of what that motor plus meth could really handle. Should try a high boost and low boost setting. Cmon doooeeeettttt!!

roplusbee 07-29-2013 12:14 AM
:stirthepot:

Nissan370 07-29-2013 05:35 AM
ha ha ha remember elperuano your the reason i pulled the trigger on the turbo kit when you keep getting on me for having a stillen and a build motor lol
anyways ya i did wimp out some i just wanted the kit on and working and i cant afford any and i mean any problems to pop up as i am out of cash

the meth was removed for the most part when i had the supercharger removed

once i recover i am going with a direct meth port and bumping the boost up

as for now it was a long road just to get the kit on and tuned

top of next year goal by april :

direct port meth kit
clutch
electronic boost controller
and more boost

ANMVQ 07-29-2013 08:07 AM
Great numbers on 8PSI, Good choice staying safe :)

Nissan370 07-29-2013 11:25 AM
Were you been man u get another car anmvq

Mr.Squeeze 07-29-2013 01:02 PM
Congrats and welcome to the built motor Turbo club now it's time to enjoy the car:tup:

elperuano 07-29-2013 01:35 PM
Quote:
Originally Posted by Mr.Squeeze (Post 2423518)
Congrats and welcome to the built motor Turbo club now it's time to turn up the boost!:tup:
fixed:tup:

Nissan370 07-31-2013 07:46 AM
stillen kit is in the for sale section :tup:

theDreamer 07-31-2013 07:51 AM
Editing your spot on the finished builds thread, and moving you from SC to single T.

Nissan370 07-31-2013 11:53 AM
thxs man

Nissan370 07-31-2013 09:16 PM
Pictures added for the stillen for sale

Nissan370 08-06-2013 07:24 AM
ok going to rain next few days so i have to wait on getting some video
this car is fast as hell the open dump wastegate is very very loud
so i need brakes,tires and a clutch to truly enjoy this thing

i'd like to say thanks to bobby and don at vsr motorsports for getting this done. its been a long road but the car runs great.

:ughdance::ughdance:

FireDan50 08-06-2013 07:31 AM
Good to hear? Can't wait for pics and vids. I should be picking mine up this week.

FireDan50 08-10-2013 11:05 PM
1 Attachment(s)
I just got my car back from VSR. Drove 8 hours from Tampa to South Carolina. Car dyno'd at 503 rwhp with 9psi. It is awesome....but my mpg's took a plunge with me boosting at every chance I can lol. That open wastegate SCREAMS. I'll have to start my own "build thread" as soon as I have time.

elperuano 08-11-2013 01:10 AM
Congrats! Enjoy the new power!

Dzel 08-11-2013 08:41 AM
Noice!

Sent with TapAhoe

Nissan370 08-11-2013 08:51 AM
Sweet !!

They forgot my turbo blanket now I have to buy one

Got the go pro up now shooting some video but need a new computer before
I can post

SRperformance 08-12-2013 08:12 AM
1 Attachment(s)
Larry you need this from us

wildmark 08-12-2013 07:22 PM
Quote:
Originally Posted by Hermitns (Post 2347898)
Like a bulldog keep attacking without knowing the whole scope. Do you read every word or just focus on that which makes your blood boil. I THOUGHT I tried to look at BOTH sides of the transaction and I NEVER said this was a good business practice. I even went thru the original posts and seperated out the specifics as written. MAYBE, just MAYBE 370 was persistent or persuesive enough to get VSR to ship a kit. AGAIN, we don't know, AGAIN you focus on a single aspect. MAYBE 370 (seeing as he has $$$ in his car and a tuner standing by) was looking at a potential business deal to buy kits and install them in his area. WE DON'T KNOW HOWEVER if it wasn't on the shelf, ready to ship kit, in stock in the warehouse, then sometimes sh1t happens. and sometimes when a supplier repeatedly stalls your order, week after week, you gotta break target lock, change your direction and give up on this particular business.
All this being said, I wonder what the comments here are gonna be if this kit puts up 550+ RWHP? Will it THEN have been worth the wait? The unsatisfactory customer service? Will others then BEG VSR to ship kits although it's listed as an IN HOUSE EXCLUSIVE? We'll have to wait and see won't we.
Just wondering why your really sticking up for the supplier with such venom?

elperuano 08-12-2013 08:02 PM
Quote:
Originally Posted by wildmark (Post 2443131)
Just wondering why your really sticking up for the supplier with such venom?
Ur a little late buddy.

wildmark 08-12-2013 08:11 PM
Quote:
Originally Posted by elperuano (Post 2443186)
Ur a little late buddy.
\

I know, just looked a little strange...all's well that ends well!


All times are GMT -5. The time now is 08:42 AM.
Page 3 of 6 12 3 45 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2