Forced Induction & 7AT 370z Info

Originally Posted by cycy89

Fast intentions Twin Turbo kit
Garrett GT2860RS X2
FI 3/2.5 down pipes w/ external dump waste gate (super loud when boost comes on! might go for internal ....)
FI 2.5 exhaust w/ carbon fiber mufflers
1000cc injector
Fast 500E return fuel system (E85)
FI 34 row oil cooler kit (setrab)
Whiteline diff bushings
TurboSmart E boost 2 electronic boost controller
Innovate air/fuel gauge

Trans upgrades:
FI trans cooler
FI billet aluminum flex plate
Excedy clutch packs
Stock Torque conv. And VB

Up coming mod: drive shaft shop axles

E85/UPREV/dynojet/tuned by Seb at SpecialtyZ
-Boost control off: 6.6 psi/456.38hp/407.27tq
-Mid boost: 10.02 psi/543.26hp/485.01tq
-high boost: 13.83 psi/620.69hp/557.66tq

Originally Posted by VSS370z

I have also been thinking about upgrading to the drive shaft shop axles but there is no one here that have done it and post a review plus the fact that they are expensive. By the way congrats on the build cycy

Originally Posted by cycy89

Will let you know about the axles after the drag strip