Fast Intentions "Twin Turbo Kit" is here

faceglide · 05-11-2014, 02:43 PM

Or thermodynamics...lol!

cycy89 · 05-11-2014, 02:49 PM

I got my mom flowers. She's in China. And she had no idea I'm boosting my z. Lol

Sent from my SGH-M919 using Tapatalk

cycy89 · 05-11-2014, 02:50 PM

Is the 3"exhaust same design as the 2.5"? Are there clearance issues?

Sent from my SGH-M919 using Tapatalk

Hotrodz · 05-11-2014, 04:38 PM

I believe they are both x pipe design. I'm lowered and I have a shaved spot on the drivers side pipe near the mid pipe. I bottomed out while passing car, there was a dip and it was to late. Dips and boost don't mix. Anyway, the good news is the cans are spotless. I think they are higher than the lowest part of the exhaust.

Sent from my SPH-L710 using Tapatalk

DEpointfive0 · 05-11-2014, 04:46 PM

^yep, Cy, I'm 99% sure it's the same, and yes, the cans are higher than the lowest part of the car.

If you do decide to go with FI's 3"... I want your exhaust

cycy89 · 05-11-2014, 04:49 PM

If I go 3" it's going to be straight pipes

Sent from my SGH-M919 using Tapatalk

DEpointfive0 · 05-11-2014, 04:52 PM

Quote:

Originally Posted by cycy89

If I go 3" it's going to be straight pipes

Sent from my SGH-M919 using Tapatalk

Sweeeeeeeeeeeeet!!! It's gonna be awesome!

And I'll think about the exhaust! (I know you got an inside deal [shaking my fist]) I wanna see it first!

faceglide · 05-11-2014, 05:40 PM

Quote:

Originally Posted by cycy89

If I go 3" it's going to be straight pipes

Sent from my SGH-M919 using Tapatalk

Lol...bro, I am so excited for your build. I want to drive an AT with this kit on it so bad!

Sttraight 3's. gonna be loud when those WGs pop open, haha! My setup is pretty quiet!

cycy89 · 05-11-2014, 04:49 PM

You can have mine. For $1600.

Sent from my SGH-M919 using Tapatalk

cycy89 · 05-11-2014, 05:50 PM

We'll see how the 2.5" does and decide what I wanna do with my exhaust. But yes, it's going to be very exciting!

Sent from my SGH-M919 using Tapatalk

faceglide · 05-11-2014, 06:37 PM

2.5" is super capable, but there are some gains to be had in 3" no doubt! It just makes it easier!

I wonder how difficult an AT swap would be with a 7at engine/trans....lol! Likely too much!

gbrettin · 05-11-2014, 10:22 PM

Oh man, Fast Intentions crew will be at Zdayz! I think the trip just got 10x better for me

. I'm looking forward to the F.I. turbo setups if any are out there...

... and if there is... someone better give me a ride in their car.

...

please

F.I. Inc. · 05-11-2014, 11:48 PM

Quote:

Originally Posted by gbrettin

Oh man, Fast Intentions crew will be at Zdayz! I think the trip just got 10x better for me

. I'm looking forward to the F.I. turbo setups if any are out there...

... and if there is... someone better give me a ride in their car.

...

please

I am coming along with TerrribleONE and his dad. We are bringing 2 GTR's from out here along with the "Beast Mode" 660 RWH E85 car that belongs to djtodd. Speaking of, wait until he chimes in with his feedback from his weekend at Global Time Attack, Road Atlanta.

Thanks, Tony

Ninjahero · 05-12-2014, 04:19 AM

Yo Faceglide once tony and the F.I. team release their upgrade for the AT tranny. I'm buying the kit, upgrade, and install. I'll let you drive mine and test it out. =D Since i'm in San Jose every weekend.

faceglide · 05-12-2014, 11:13 AM

Quote:

Originally Posted by Ninjahero

Yo Faceglide once tony and the F.I. team release their upgrade for the AT tranny. I'm buying the kit, upgrade, and install. I'll let you drive mine and test it out. =D Since i'm in San Jose every weekend.

I'll take you up on that !

Sent from my LG-D950 using Tapatalk

05-11-2014, 02:49 PM	#2 (permalink)
cycy89 A True Z Fanatic Join Date: Jun 2011 Location: 120mph somewhere Posts: 1,097 Drives: #TTURBOZ Rep Power: 32	I got my mom flowers. She's in China. And she had no idea I'm boosting my z. Lol Sent from my SGH-M919 using Tapatalk __________________ Fast Intentions Twin Turbo Kit GT2860RS, 677WHP\|FI 34 row oil cooler\|F.I. CBE\|Fast 500E return fuel system\|FI trans cooler\|FI billet aluminum flex plate\|Excedy clutch packs\|ENKEI RP03\|BC BR coilovers\|SEIBON Carbon\|EVO-R Rear fog light\|GTR push start\|Whiteline sway bars, Diff bushing\|DSS axles\|ECUTekW/FlexFuelTune

05-11-2014, 02:50 PM	#3 (permalink)
cycy89 A True Z Fanatic Join Date: Jun 2011 Location: 120mph somewhere Posts: 1,097 Drives: #TTURBOZ Rep Power: 32	Is the 3"exhaust same design as the 2.5"? Are there clearance issues? Sent from my SGH-M919 using Tapatalk __________________ Fast Intentions Twin Turbo Kit GT2860RS, 677WHP\|FI 34 row oil cooler\|F.I. CBE\|Fast 500E return fuel system\|FI trans cooler\|FI billet aluminum flex plate\|Excedy clutch packs\|ENKEI RP03\|BC BR coilovers\|SEIBON Carbon\|EVO-R Rear fog light\|GTR push start\|Whiteline sway bars, Diff bushing\|DSS axles\|ECUTekW/FlexFuelTune

05-11-2014, 04:38 PM	#4 (permalink)
Hotrodz A True Z Fanatic Join Date: Aug 2012 Location: NW, AZ Posts: 9,330 Drives: 10 Nissan 370z Nismo Rep Power: 2684386	I believe they are both x pipe design. I'm lowered and I have a shaved spot on the drivers side pipe near the mid pipe. I bottomed out while passing car, there was a dip and it was to late. Dips and boost don't mix. Anyway, the good news is the cans are spotless. I think they are higher than the lowest part of the exhaust. Sent from my SPH-L710 using Tapatalk __________________ *Fast Intentions TT Installed and Tuned by Seb at SpecialtyZ 610whp 560tq:\|Fast Intentions 3" TT-TDX*\|SpecialtyZ/Fast Intentions 72 Row Oil Cooler\|SZ 6 Puck Clutch & Flywheel\|3GsCustoms\|Z1\|Wavetrac\|Hotchkis\|Whiteline \|Blitz\|Fortune Auto 500\|Fujimura\|SPL\|H&R\|TK\|TWM\|RPM Rollbar\|Sparco\|Next Level Performance\|TrackSpec\|AeroFlow Dynamics\|Pioneer\|

05-11-2014, 04:46 PM	#5 (permalink)
DEpointfive0 A True Z Fanatic Join Date: Jan 2012 Location: SoCal Posts: 14,824 Drives: a lot Rep Power: 17153	^yep, Cy, I'm 99% sure it's the same, and yes, the cans are higher than the lowest part of the car. If you do decide to go with FI's 3"... I want your exhaust __________________ Do YOU want to know what/where I got my username from? ( Click to show/hide ) NSFW due to language:

05-11-2014, 04:49 PM	#6 (permalink)
cycy89 A True Z Fanatic Join Date: Jun 2011 Location: 120mph somewhere Posts: 1,097 Drives: #TTURBOZ Rep Power: 32	If I go 3" it's going to be straight pipes Sent from my SGH-M919 using Tapatalk __________________ Fast Intentions Twin Turbo Kit GT2860RS, 677WHP\|FI 34 row oil cooler\|F.I. CBE\|Fast 500E return fuel system\|FI trans cooler\|FI billet aluminum flex plate\|Excedy clutch packs\|ENKEI RP03\|BC BR coilovers\|SEIBON Carbon\|EVO-R Rear fog light\|GTR push start\|Whiteline sway bars, Diff bushing\|DSS axles\|ECUTekW/FlexFuelTune

05-11-2014, 02:43 PM	#1 (permalink)
faceglide Track Member Join Date: Sep 2012 Location: san jose Posts: 550 Drives: '12 370Z FI TT BkChr Rep Power: 39	Or thermodynamics...lol!

05-11-2014, 04:49 PM	#9 (permalink)
cycy89 A True Z Fanatic Join Date: Jun 2011 Location: 120mph somewhere Posts: 1,097 Drives: #TTURBOZ Rep Power: 32	You can have mine. For $1600. Sent from my SGH-M919 using Tapatalk __________________ Fast Intentions Twin Turbo Kit GT2860RS, 677WHP\|FI 34 row oil cooler\|F.I. CBE\|Fast 500E return fuel system\|FI trans cooler\|FI billet aluminum flex plate\|Excedy clutch packs\|ENKEI RP03\|BC BR coilovers\|SEIBON Carbon\|EVO-R Rear fog light\|GTR push start\|Whiteline sway bars, Diff bushing\|DSS axles\|ECUTekW/FlexFuelTune

05-11-2014, 05:50 PM	#10 (permalink)
cycy89 A True Z Fanatic Join Date: Jun 2011 Location: 120mph somewhere Posts: 1,097 Drives: #TTURBOZ Rep Power: 32	We'll see how the 2.5" does and decide what I wanna do with my exhaust. But yes, it's going to be very exciting! Sent from my SGH-M919 using Tapatalk __________________ Fast Intentions Twin Turbo Kit GT2860RS, 677WHP\|FI 34 row oil cooler\|F.I. CBE\|Fast 500E return fuel system\|FI trans cooler\|FI billet aluminum flex plate\|Excedy clutch packs\|ENKEI RP03\|BC BR coilovers\|SEIBON Carbon\|EVO-R Rear fog light\|GTR push start\|Whiteline sway bars, Diff bushing\|DSS axles\|ECUTekW/FlexFuelTune

05-11-2014, 06:37 PM	#11 (permalink)
faceglide Track Member Join Date: Sep 2012 Location: san jose Posts: 550 Drives: '12 370Z FI TT BkChr Rep Power: 39	2.5" is super capable, but there are some gains to be had in 3" no doubt! It just makes it easier! I wonder how difficult an AT swap would be with a 7at engine/trans....lol! Likely too much!

05-11-2014, 10:22 PM	#12 (permalink)
gbrettin A True Z Fanatic Join Date: Oct 2010 Location: Portage, MI Posts: 2,304 Drives: Tricycle Rep Power: 589452	Oh man, Fast Intentions crew will be at Zdayz! I think the trip just got 10x better for me . I'm looking forward to the F.I. turbo setups if any are out there... ... and if there is... someone better give me a ride in their car. ... please

05-12-2014, 04:19 AM	#14 (permalink)
Ninjahero Base Member Join Date: Mar 2014 Location: tracy Posts: 131 Drives: 2011 Mini JCW Rep Power: 13	Yo Faceglide once tony and the F.I. team release their upgrade for the AT tranny. I'm buying the kit, upgrade, and install. I'll let you drive mine and test it out. =D Since i'm in San Jose every weekend.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Fast Intentions 3" (Twin Turbo) exhaust is here!	F.I. Inc.	Intake/Exhaust	91	02-08-2017 05:09 AM
Fast Intentions "Twin Turbo Kit" Official Release	F.I. Inc.	Drivetrain/Engine	95	11-19-2014 11:38 PM
Twin Turbo vs. Single Turbo V6: A Dissertation	Mike@GTM	Forced Induction	115	08-14-2014 09:04 PM
Twin scroll vs twin turbo	SS_Firehawk	Forced Induction	32	04-13-2014 12:02 PM
GTM Motorsports Twin Turbo vs Greddy Twin Turbo Kit	Nismo221	Forced Induction	57	08-16-2011 04:44 PM

*****Fast Intentions "Twin Turbo Kit" is here*****

Fast Intentions "Twin Turbo Kit" is here