2013 SC Nismo stage 1.5 GTM

Motinatan · 03-26-2013, 02:44 AM

[QUOTE=Baer383;2023643]Some of you know I had a 2010 sport/touring with this kit on it,it ended up making 470rwhp 342rwtq but after 6 months of fun my 7at gave way so I put it back to stock and traded it in for 2013 Nismo then proceeded to put my GTM stage 1.5 on my new car for Z Nationals which I finished it enough to drive it there but my tune wasn't done.
Fast forward to today I finish my tune and brought it to Jon @ Z1 Motorsports for some dyno time first pull was 483rwhp 355rwtq Jon said the tune good but it kept leaning out on the very top end,so Jon played around with it for awhile and I asked him to play with the VVEL he said my ROM won't allow it so a few hours later.

No VVEL No Methanol 73deg sunny day it ended up at 516rwhp 383rwtq
I also talked to Sam @ GTM today and he was happy for me but not surprised about the numbers he said with the tune on the money numbers like this should be there,so here is the dyno sheet.

hi

im intende to get the st 1.5 s.c from gtm

what pully size you use ? how much psi?

what will be the different in power gain between the 84 pully to the 96 pully

do you have a dyno graph that shows boost vs hp / torque

how much hp you will have in the engine if you have 516rwhp ?

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
My New 2013 Nismo	DavidB123	Nismo 370Z	207	02-26-2013 05:12 PM
2013 PW Nismo	NINJA	New Nismo 370Z Owner	30	02-01-2013 10:17 AM
Nismo 2013 #40	Achille	Nismo 370Z	21	11-19-2012 11:19 PM
DIY: Fender Lining Vent for Oil Cooler GTM Supercharger Stage 1 on NISMO	wind.zero	DIY Section (Do-It-Yourself)	14	04-19-2012 02:49 PM
Jotech Motorsports: GTM Stage 1 SC Turn Key 2011 NISMO	wind.zero	Forced Induction	103	04-19-2012 08:24 AM

03-26-2013, 02:44 AM	#24 (permalink)
Motinatan Base Member Join Date: Dec 2010 Location: Israel Posts: 46 Drives: 2012 370z m6 white Rep Power: 16	[QUOTE=Baer383;2023643]Some of you know I had a 2010 sport/touring with this kit on it,it ended up making 470rwhp 342rwtq but after 6 months of fun my 7at gave way so I put it back to stock and traded it in for 2013 Nismo then proceeded to put my GTM stage 1.5 on my new car for Z Nationals which I finished it enough to drive it there but my tune wasn't done. Fast forward to today I finish my tune and brought it to Jon @ Z1 Motorsports for some dyno time first pull was 483rwhp 355rwtq Jon said the tune good but it kept leaning out on the very top end,so Jon played around with it for awhile and I asked him to play with the VVEL he said my ROM won't allow it so a few hours later. No VVEL No Methanol 73deg sunny day it ended up at 516rwhp 383rwtq I also talked to Sam @ GTM today and he was happy for me but not surprised about the numbers he said with the tune on the money numbers like this should be there,so here is the dyno sheet. hi im intende to get the st 1.5 s.c from gtm what pully size you use ? how much psi? what will be the different in power gain between the 84 pully to the 96 pully do you have a dyno graph that shows boost vs hp / torque how much hp you will have in the engine if you have 516rwhp ?