S&R Performance Crash Beam

Nixlimited · 11-28-2012, 11:13 AM

Quote:

Originally Posted by Chuck33079

I was under the understanding that the crash beam in USDM cars were a 5 mph bumper beams, meaning it was to prevent damage to the mechanical componants in the front end in collisions of less than 5mph. Does the JDM model have the same beam? Their rules only require a 3 mph bumper beam, and they usually put a smaller one in. Plus, the intercooler itself will function as the world's most expensive crash beam in larger impacts. I wouldn't say it's unsafe, just far less than ideal since your new crash beam is an intercooler that probably costs around $1k to replace and prevents driving the car if damaged.

Please read the whole thread. As was discussed above, the 5 MPH bumper guard is the Styrofoam bit that fits within the bumper skin. The crash beam is a safety piece meant to absorb and redirect energy around the cockpit. The two are not the same in form or function.

Chuck33079 · 11-28-2012, 11:32 AM

Quote:

Originally Posted by Nixlimited

Please read the whole thread. As was discussed above, the 5 MPH bumper guard is the Styrofoam bit that fits within the bumper skin. The crash beam is a safety piece meant to absorb and redirect energy around the cockpit. The two are not the same in form or function.

I have read the whole thread. Several times. It doesn't seem to be as cut and dried as your slightly condescending post would make it.

Isamu · 11-28-2012, 12:31 PM

Quote:

Originally Posted by Red__Zed

Pretty standard practice to remove that front crash bar.

It's technically a horrible idea, but oh, the things we do for speed.

worrying about that is like worrying about your warrenty...

valpozguy · 11-29-2012, 12:44 AM

I have the front factory beam. I'm just not sure why this one is better and mine is not safe?

sent from my SAMSUNG- SINGLE TURBO SGH-1717

Nixlimited · 11-29-2012, 11:13 AM

Quote:

Originally Posted by Chuck33079

I have read the whole thread. Several times. It doesn't seem to be as cut and dried as your slightly condescending post would make it.

Not trying to be condescending, but posts 15-17 already discussed the difference between the 5mph foam bit and the crash beam and post 23 by S&R already said that their crash beam is meant to be a safety replacement for the OEM metal crash beam. Trying to avoid any more confusion in the thread about the difference between the two.

Chuck33079 · 11-29-2012, 11:46 AM

Quote:

Originally Posted by Nixlimited

Not trying to be condescending, but posts 15-17 already discussed the difference between the 5mph foam bit and the crash beam and post 23 by S&R already said that their crash beam is meant to be a safety replacement for the OEM metal crash beam. Trying to avoid any more confusion in the thread about the difference between the two.

Correct, those posts are a discussion with members arguing both possible uses of the beam. S&R's post is taken with a grain of salt as they're the seller of the part (don't take that the wrong way S&R. I'm still buying one once you tell me it fits.). I was looking for actual confirmation of the bar's use as a structural componant rather than as a 5 mph bumper beam. Hence the question of whether the JDM 370z's have the same beam, or a smaller one as they are held to a standard of a 3 mph bumper beam. If they use the same one, it's very likely the bar is structural. If they use a smaller one, it's likely it is only to protect the mechanical componants.

SRperformance · 11-29-2012, 11:59 AM

Quote:

Originally Posted by valpozguy

So bobby are you saying that the kit you installed on my car is not safe? This is not good at all. From what you just said.

sent from my SAMSUNG- SINGLE TURBO SGH-1717

No, your intercooler is welded to the crash beam. Its hard to ship a kit with the intercooler welded to a beam.

SRperformance · 11-29-2012, 12:37 PM

I need somebody in Florida to allow me to make a crash beam

Isamu · 11-29-2012, 02:24 PM

Quote:

Originally Posted by SRperformance

I need somebody in Florida to allow me to make a crash beam

maybe if I move down!

elperuano · 11-29-2012, 02:25 PM

I'm in Florida, bout 2 hours away with a GTM kit

SRperformance · 11-29-2012, 05:20 PM

Quote:

Originally Posted by elperuano

I'm in Florida, bout 2 hours away with a GTM kit

Well I need your car for a few hours

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Custom intake setup -- Stillen G3's, Velocity Stacks, Custom Front Crash Beam, pics	'10Anamoly	Intake/Exhaust	26	02-14-2015 10:59 AM
HID Replacement Low Beam Bulbs @ JWM- Free shipping!	JWMotoring	Body Interior/Exterior	236	12-26-2012 10:48 PM
High beam not working 100%	eterneSoul	Exterior & Interior	7	10-23-2012 05:54 PM
[FOR SALE] Selling soon: JL Audio XD200/2, Custom Front Crash Beam, Nismo S-Tune stuff, more	'10Anamoly	Parts for sale (Private Classifieds)	4	10-09-2012 01:04 PM
GNU Carbon High Beam Snowboard with Burton Custom Bindings	Red__Zed	Misc Items for sale (No Z stuff)	0	05-26-2011 09:30 PM

11-29-2012, 12:44 AM	#49 (permalink)
valpozguy Track Member Join Date: Feb 2012 Location: valparaiso Posts: 501 Drives: 09 z Rep Power: 16	I have the front factory beam. I'm just not sure why this one is better and mine is not safe? sent from my SAMSUNG- SINGLE TURBO SGH-1717

11-29-2012, 12:37 PM	#53 (permalink)
SRperformance Base Member Join Date: Jun 2012 Location: tampa Posts: 137 Drives: 2003 Z32 Rep Power: 12	I need somebody in Florida to allow me to make a crash beam

11-29-2012, 02:25 PM	#55 (permalink)
elperuano A True Z Fanatic Join Date: Oct 2011 Location: Southwest FL Posts: 1,374 Drives: G37S Rep Power: 28	I'm in Florida, bout 2 hours away with a GTM kit