Originally Posted by Isamu (Post 1886604)

have you called Bobby?

and im with coop on this one... report back once it's installed

Originally Posted by ANMVQ (Post 1887028)

Pics of the MAF housing? From what S&R's pipe? I have it in the pics above? The housings are not stait and do not line up with the cut out in the intake pipe leaving a gap,

Originally Posted by ANMVQ (Post 1886525)

Hey Coop thanx man, For the info, I is fully welded on the but there is a gap between the two peices, I mean trust me I did not expect it to be "perfect" Because it is the first one. But I have had parts customed before," Air intake for my old EVO 8" Bill at DSG made it for me and I was the only one to ever run it, An it looked 100% better than this, The things that really bug me are the spaces on the inside where the MAF's would sit, the gap where the 2 arms meet and the huge mound of a weld, The interior of the intake should be smooth no? Imperfections will cause turbulence wont they? Plus on the outside the MAF housing are slanted? So the MAF would sit slanted on the pipe , Wont that affect the air readings? Things I want to understand. I know being the first and having this made "Special " for you or your car take time and can be a trial and error , But it just seems this went off from the start. Like I said before I'm sure Bobby is great, But some otheres have to help him out.

Originally Posted by JMac88 (Post 1886849)

Because he has a stillen kit he is supposed to accept sub par standards?

Originally Posted by ANMVQ (Post 1887028)

I'm also with Jmac on this, What because I have the Stillen kit(Supposed to sux) I have to use something I feel is not good..

Originally Posted by ANMVQ (Post 1886170)

http://www.the370z.com/attachments/f...maf-inside.jpg :(

Originally Posted by SharpByCoop (Post 1887197)

Huh? You guys must be self conscious about the Stillen kit, because no one said anything about brands. These comments are completely irrelevant to the opinions posted.

Judge: Strike them from the record! LOL!

Thanks,

Coop

Originally Posted by Mr.Squeeze (Post 1887172)

This is all part of doing a custom job put the intake on and test it on the dyno.Leave the front bumper off and test between the two intakes that one and the Stillen one.

I am with Coop on this one as well on this one.

I wasted more thant the $170 that you just spent on that one intake on Cog pulleys and belt's trying to figure out the correct combo. Now you have the correct Cog combo and belt combo through trial and error by me. Basically what I am trying to say is things might not work out the first time the way you want them to.

I really hope thing's work out for you but if you didnt think you was going to have a few bumps in the road , then you might want to stop right now and leave the kit as is.

Originally Posted by ANMVQ (Post 1887459)

If I had an option to do this maybe but I honesly dont trust the way it looks, Just comes down to me be comfortable with bolting on the car, And if I was to leave the bumper off and swap things around myself at the dyno I would. But I wasnt planning on do a VS testing from Stillen and S&R.

I was almost planning on hitting bumps in the road, Just not with workmanship, Parts being delayed, Not in stock, Waiting for things to get fixed, YES of course.. But I have been in this for over what weeks without the car, So I have spent the 6+ weeks of the summer in a loaner car. Did not think it was going to be smooth, But at the sametime not this screwy.

Originally Posted by Mr.Squeeze (Post 1887790)

Believe I understand frustration things happen ,you never know what kind of bumps in the road you might hit in a build. I know what's it's like Im still not at 100% with mine build yet.

Originally Posted by RyanWest (Post 1888097)

dispute the charges if you paid with a card man!

Originally Posted by Mr.Squeeze (Post 1887790)

Believe I understand frustration things happen ,you never know what kind of bumps in the road you might hit in a build. I know what it feel's like Im still not at 100% with mine build yet.

Originally Posted by ANMVQ (Post 1888176)

I paid nothing for this,(Becsue of the first mix up). This was something I was thinking about last night also. I wonder "IF" I have paid the $194( Started at $394) I was orginally told I had to pay. Guys would still say it looks good and run it. Just food for thought, I'm still look at that piece as it cost me the $194??? IDK. :icon14:

Picking up the car Wens I hope? It should be buttoned up today or tomorrow and is getting a full detail, Was dusty as heck from sitting, LOL . Then I have to see if or when I can get out and pick it up..

Originally Posted by Isamu (Post 1888187)

have you talked to Bobby since recieving the product? Ill shoot him a text on your behalf if you would like