7 speed automatic rebuild

ANMVQ

just saw the same rhing about the pulley upgrade Iam doing the same, But think the T trim from vortech + I upgraded fuel,maf's and the heat exchanger, cog pulleys what'd you make for whp?

__________________
14 Q50 AWD, ARK, ECUTEK (SEB), Takda,

WILD370Z

i havent up graded the mafs as yet they have not maxed out yet i will put on the 2.80 pulley and see how it goes my car made about 408 rwhp with the cat back system and the stock pulley

i would love to see how your heat exchanger works out im very interested

__________________
Custom yellow respray-custom interior-lights-20 inch wheels-x force full exaust-stillen sc-928 impeller-carbonetics 2.0 differential-34 row oil cooler-auto cooler-2.8 pulley up grade

ANMVQ

Yea you will max them out tho with the pulley upgrade, There is a guy here (In New York) who max'd his out, He also has been helping me a lot. I would up doing the pullies, and upgraded the SC from the SCI to SI. So I'm going to see around 12-13 PSI,Upgraded my plugs and injectors also. The heat exchanged is huge 27x6x3.5 will sit in the front , Basically a front-mount


408rwho is right on the money too I made 412 WHP. with the 8PSI pulley, Al tho I see 9 .

__________________
14 Q50 AWD, ARK, ECUTEK (SEB), Takda,

WILD370Z

Thanks i love the wheels on your car btw is squeez helping you out as well? he is very helpfull. my tranny is not covered the main problem i have with it if you are half way on the throttle from 3rd to 4th it feels like a bomb has gone off in the tranny and from 4th to 5th it slips like a clutch and you have to wait a few seconds before you can accelerate and if you leave it in 5th gear for to long the car goes into limp mode and i have to pull over turn the car off then on. i dont think i can change the heat exchanger as i have limited amount of space but if it works well with you let me know. how would you know if you need a maf upgrade? and have you put a b.o.v on yet?

__________________
Custom yellow respray-custom interior-lights-20 inch wheels-x force full exaust-stillen sc-928 impeller-carbonetics 2.0 differential-34 row oil cooler-auto cooler-2.8 pulley up grade

Mr.Squeeze

Yeah I am helping him out as well.

You would know if your Maf's are maxed out by looking at data log using uprev maf volts.

__________________
Driven Motorsports Single Turbo 7675 T4 1.32 A/R 995WHP 780TQ

WILD370Z

Thanks for that i will have my tuner check it out next time we are on the dyno after i install the b.o.v and pulley

__________________
Custom yellow respray-custom interior-lights-20 inch wheels-x force full exaust-stillen sc-928 impeller-carbonetics 2.0 differential-34 row oil cooler-auto cooler-2.8 pulley up grade

ANMVQ

Thanx for the love on the wheels, Only G with them( BMW/german cars run them),
Man I'm really sorry the about the tranny issues and warrenty not covering it, The GTM kit is the STG 3 or 4 or did you just buy imternals and building yourself? You still will need to up the TQ tables VIA UPREV either way. You can change the heat exchanger once mine is done( At the dealer get everything done) I will have updated pics and info- I know its not going to just "FIT" but my tech will have to move things around, We have the same things upfront, Oil and Trans coolers, ETC.. The BOV Squezze turned me on to and nothing is installed yet Still waiting the SC to come back from Vortech( Rebulid under Warrenty-and up graded to the SI). I have a thread on here also with everything in it, Check it out.

BTW YES Mr.Squezze has been a huge help pretty much gave me all the part numbers and has been helping me along the way since he was down this road some what. He max'd his MAF's out at 465 WHP so I bought upgraded ones them decided to also have S&R build me a custom intake anyway( The Stillen one is SMALL) GTM uses a 3 inch for theirs, I upped mine to 2.75, So we'll see.

__________________
14 Q50 AWD, ARK, ECUTEK (SEB), Takda,

WILD370Z

Wow you should be getting some good numbers with all of your upgradesi will be happy if i get around 440 whp since i have another weekend cruiser with 500 whp and weighing 2800 pounds.
i should be happy with the 2.75 in the car and get the timing right for some down low power. how much is the custom intake costing if you dont mind me asking and is this for more power in the top end?

__________________
Custom yellow respray-custom interior-lights-20 inch wheels-x force full exaust-stillen sc-928 impeller-carbonetics 2.0 differential-34 row oil cooler-auto cooler-2.8 pulley up grade

WILD370Z

oh with the tranny rebuild it is a rebuild that Sam put together that has the frictions,steels,pistons and seals there is no drums because i dont think they are damaged

__________________
Custom yellow respray-custom interior-lights-20 inch wheels-x force full exaust-stillen sc-928 impeller-carbonetics 2.0 differential-34 row oil cooler-auto cooler-2.8 pulley up grade