Blackonorange's STS Turbo Build!! - Done by Speedtech Saskatoon

blackonorange · 04-15-2012, 06:00 PM

I don't think it's the air filter thing you mentioned , since I had my rain sock off at the time i didnt have time today to tear it all apart , im gonna try that test you mentioned and I'm also gonna test the oil return pump. Thanks for the info 96 big body

blackonorange · 04-15-2012, 06:05 PM

This still doesn't explain the check engine light

blackonorange · 04-17-2012, 12:05 AM

K so guys , we took everything apart, the turbo the exhaust , everything checks out except for a frothy mess in the turbo , the ecu code was 0P005 ( I think, I forget the exact numbers) but it ment ECM failure

so Itthrew the car into limp mode and dumped all the fuel out the exhaust? Does this even make sense? Does limp mode make our cars smoke ? Can some one tell me what happened? I erased the code and the car runs like a raped ape again, what's the deal? Any help is appreciated

hindi1973 · 04-17-2012, 12:19 AM

our sts 370z has been having some error codes as well p1006 or something like that (sensor error) and check engine pops up again , we deleted it but it comes again , once on wot the car shut down by it self and smoked like hell for a sec when it shut off but once started again it never happened again, but the code is still their and we just accepted it as is and left it alone , the customer likes the kit , but we have been having boost leak issues , a couple of the exhaust couplers that were deleted and welded to fix the issue and stopping it from comin.

hope this helps

blackonorange · 04-17-2012, 12:25 AM

Quote:

Originally Posted by hindi1973

our sts 370z has been having some error codes as well p1006 or something like that (sensor error) and check engine pops up again , we deleted it but it comes again , once on wot the car shut down by it self and smoked like hell for a sec when it shut off but once started again it never happened again, but the code is still their and we just accepted it as is and left it alone , the customer likes the kit , but we have been having boost leak issues , a couple of the exhaust couplers that were deleted and welded to fix the issue and stopping it from comin.

hope this helps

Hmmm weird , my code is gone now , but about the the exhaust leaks how did you find them? And that's basically what mine did I was wot and boom limp mode and smoke , the car stayed idling tho

hindi1973 · 04-17-2012, 01:58 AM

we did a boost test leak by using the mechine the uses 2 methods first of all putting pressure in the intake by removing the air filter and placing it there and then after marking the leaks places by hearing them we use the second method which is white smoke (vaporized smoke

) to find little places that we might have missed , from wht i read the sensor in the intake doesnt take much pressure at once so it goes crazy their is a section in the uprev tuning in the DTC section to by pass it but we couldnt enter that section although the ecu is not locked but its limited for the tuner to enter everywhere unless he uploads the map from his wire which means the map in the car now gets deleted

, the code we get is P0106 MAP/Barometric Pressure Circuit Range/Performance Problem, and regarding the crazy shut off dont know why it happened or if its attached to what i am mentioning above , but i could reassure you that my customer didnt have any problems with his gtm stage 1 kit , not even a check engine or anything just had coolent temps problems and thats due to our 130f minimum heat

, not bashing here but just sharing real facts that have happened and ive seen them , again all kits are amazing , but i guess these 370z's are just too sensitive .

blackonorange · 04-17-2012, 08:50 AM

If anyone has any info on why my ecu would do this please chime in

Chinook · 04-17-2012, 12:17 PM

Have you contacted STS, try Marc.

blackonorange · 05-04-2012, 08:18 PM

Sorry guys I've been missing in action for a whole we reset the ecu, and reflashed the car runs strong and has been for 1000 k, no one knows what happened or why but it seems to be fine

Chinook · 05-04-2012, 11:59 PM

Good to hear that your back on the road able to enjoy your ride

gbrettin · 05-07-2012, 09:21 PM

How many miles have you put on your Z with the STS?

Chinook · 05-07-2012, 10:35 PM

I have about 6,000 km's on my kit, so far so good. Sounds and performs great!

blackonorange · 05-08-2012, 09:53 AM

Quote:

Originally Posted by gbrettin

How many miles have you put on your Z with the STS?

1200 k ish I love it

Chinook · 05-08-2012, 11:17 AM

Quote:

Originally Posted by blackonorange

1200 k ish I love it

Great to hear! sounds like I may be seeing you in a few weeks for some dyno tuning! Good to hear, looking forward to meeting you. How many lbs of boost are you planning on running with this tune?

blackonorange · 05-08-2012, 06:51 PM

Quote:

Originally Posted by Chinook

Great to hear! sounds like I may be seeing you in a few weeks for some dyno tuning! Good to hear, looking forward to meeting you. How many lbs of boost are you planning on running with this tune?

9 probably I gotta get my boost controller and meth injection on

04-17-2012, 01:58 AM	#261 (permalink)
hindi1973 Base Member Join Date: Mar 2011 Location: unknown Posts: 177 Drives: twinturbo 370z Rep Power: 14	we did a boost test leak by using the mechine the uses 2 methods first of all putting pressure in the intake by removing the air filter and placing it there and then after marking the leaks places by hearing them we use the second method which is white smoke (vaporized smoke ) to find little places that we might have missed , from wht i read the sensor in the intake doesnt take much pressure at once so it goes crazy their is a section in the uprev tuning in the DTC section to by pass it but we couldnt enter that section although the ecu is not locked but its limited for the tuner to enter everywhere unless he uploads the map from his wire which means the map in the car now gets deleted, the code we get is P0106 MAP/Barometric Pressure Circuit Range/Performance Problem, and regarding the crazy shut off dont know why it happened or if its attached to what i am mentioning above , but i could reassure you that my customer didnt have any problems with his gtm stage 1 kit , not even a check engine or anything just had coolent temps problems and thats due to our 130f minimum heat , not bashing here but just sharing real facts that have happened and ive seen them , again all kits are amazing , but i guess these 370z's are just too sensitive .

04-17-2012, 12:17 PM	#263 (permalink)
Chinook Premium Member Join Date: Apr 2010 Location: Edmonton Age: 46 Posts: 84 Drives: 09 Nissan 370Z CS M6 Rep Power: 15	Have you contacted STS, try Marc. __________________ 09 Touring/Nav 6MT Carbon Silver STS Turbo

05-04-2012, 11:59 PM	#265 (permalink)
Chinook Premium Member Join Date: Apr 2010 Location: Edmonton Age: 46 Posts: 84 Drives: 09 Nissan 370Z CS M6 Rep Power: 15	Good to hear that your back on the road able to enjoy your ride __________________ 09 Touring/Nav 6MT Carbon Silver STS Turbo

05-07-2012, 10:35 PM	#267 (permalink)
Chinook Premium Member Join Date: Apr 2010 Location: Edmonton Age: 46 Posts: 84 Drives: 09 Nissan 370Z CS M6 Rep Power: 15	I have about 6,000 km's on my kit, so far so good. Sounds and performs great! __________________ 09 Touring/Nav 6MT Carbon Silver STS Turbo

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Rear Mounted Turbo (scratch build)	jnaut	Forced Induction	182	12-06-2012 10:20 AM
Twin Turbo Build	LafitteZ	40th Anniversary 370Z	42	10-05-2011 09:58 AM
AAM Competition : Double Z34 Twin Turbo Build	Jon@AAMComp	Forced Induction	60	01-17-2011 11:47 PM
TITAN's Twin Turbo build Done!!!!!!	kenbains12	Forced Induction	49	06-18-2010 07:32 AM

04-15-2012, 06:00 PM	#256 (permalink)
blackonorange A True Z Fanatic Join Date: Jul 2011 Location: Saskatchewan Posts: 1,078 Drives: 09 370z Rep Power: 15	I don't think it's the air filter thing you mentioned , since I had my rain sock off at the time i didnt have time today to tear it all apart , im gonna try that test you mentioned and I'm also gonna test the oil return pump. Thanks for the info 96 big body

04-15-2012, 06:05 PM	#257 (permalink)
blackonorange A True Z Fanatic Join Date: Jul 2011 Location: Saskatchewan Posts: 1,078 Drives: 09 370z Rep Power: 15	This still doesn't explain the check engine light

04-17-2012, 12:05 AM	#258 (permalink)
blackonorange A True Z Fanatic Join Date: Jul 2011 Location: Saskatchewan Posts: 1,078 Drives: 09 370z Rep Power: 15	K so guys , we took everything apart, the turbo the exhaust , everything checks out except for a frothy mess in the turbo , the ecu code was 0P005 ( I think, I forget the exact numbers) but it ment ECM failure so Itthrew the car into limp mode and dumped all the fuel out the exhaust? Does this even make sense? Does limp mode make our cars smoke ? Can some one tell me what happened? I erased the code and the car runs like a raped ape again, what's the deal? Any help is appreciated

04-17-2012, 12:19 AM	#259 (permalink)
hindi1973 Base Member Join Date: Mar 2011 Location: unknown Posts: 177 Drives: twinturbo 370z Rep Power: 14	our sts 370z has been having some error codes as well p1006 or something like that (sensor error) and check engine pops up again , we deleted it but it comes again , once on wot the car shut down by it self and smoked like hell for a sec when it shut off but once started again it never happened again, but the code is still their and we just accepted it as is and left it alone , the customer likes the kit , but we have been having boost leak issues , a couple of the exhaust couplers that were deleted and welded to fix the issue and stopping it from comin. hope this helps

04-17-2012, 08:50 AM	#262 (permalink)
blackonorange A True Z Fanatic Join Date: Jul 2011 Location: Saskatchewan Posts: 1,078 Drives: 09 370z Rep Power: 15	If anyone has any info on why my ecu would do this please chime in

05-04-2012, 08:18 PM	#264 (permalink)
blackonorange A True Z Fanatic Join Date: Jul 2011 Location: Saskatchewan Posts: 1,078 Drives: 09 370z Rep Power: 15	Sorry guys I've been missing in action for a whole we reset the ecu, and reflashed the car runs strong and has been for 1000 k, no one knows what happened or why but it seems to be fine

05-07-2012, 09:21 PM	#266 (permalink)
gbrettin A True Z Fanatic Join Date: Oct 2010 Location: Portage, MI Posts: 2,238 Drives: Tricycle Rep Power: 542172	How many miles have you put on your Z with the STS?

***Blackonorange's STS Turbo Build!! - Done by Speedtech Saskatoon***

Blackonorange's STS Turbo Build!! - Done by Speedtech Saskatoon