Forced Induction Kit Vendor Feedback Thread

Alkatraz · 03-06-2014, 08:38 PM

I think that it is a good idea to have a thread where everyone can post up whatever they like about the vendors who are supplying kits to the VQ37 market via this forum.

Both positive and negative info is welcome. Bitch, moan, cry, praise, nut-hug, say whatever you feel should be known about the vendors on this forum. This way everything can be in one place and no one should need to post their opinions in other peoples threads. Other threads will then be able to stay on-topic and anyone who has any off-topic positive or negative opinions that they would like to share with the community, wont clutter up legitimate threads.

People can express their opinions here and argue them back and forth to their hearts content.

At the very least this thread could be entertaining.......

Alkatraz · 03-06-2014, 08:41 PM

I'll start......

Boosted Performance Single Turbo Kit looks awesome. I love the handmade aspect of it and the obvious love and attention to detail that is being put into every kit. That being said, its gay because it wont fit my car!

Fast Intentions TT Kit looks like it was carved by the very hands of God himself! I would love to be able to match it up to my FI full 2.5inch exhaust and the quality would be amazing! That being said, its gay because it wont fit my car!

GTM TT kits looks great. i love the fact that they have developed their own parts (Oil pan etc.) and that it will fit any VQ37 on the planet. That being said, its gay because I have been waiting forever for it and still don't know when (if?) it will arrive!

elperuano · 03-06-2014, 08:48 PM

I can appreciate your honesty! But like the kit I believe the oil pan should be put in that same sentence.

elperuano · 03-06-2014, 08:51 PM

Also how sure are you the gtm kit will fit ur car? Have you seem another aussie ride with the kit? Who is telling you it will fit? Cuz we all know how far his word goes. I'm sure if the gtm is supposed to "fit" you could make the FI kit fit.

Alkatraz · 03-06-2014, 08:53 PM

Quote:

Originally Posted by elperuano

I can appreciate your honesty! But like the kit I believe the oil pan should be put in that same sentence.

Either I'm reading it wrong or you wrote it wrong. "oil pan should be put in that same sentence"......I don't follow. Oil pan is also gay?!? I is confused.

elperuano · 03-06-2014, 08:58 PM

In the same sentence u used the gtm kit. They make their own kits and oil pan. Haven't seen the kit OR anyone with the oil pan yet I think.

Alkatraz · 03-06-2014, 09:03 PM

Quote:

Originally Posted by elperuano

Also how sure are you the gtm kit will fit ur car? Have you seem another aussie ride with the kit? Who is telling you it will fit? Cuz we all know how far his word goes. I'm sure if the gtm is supposed to "fit" you could make the FI kit fit.

GTM TT kits have already been fitted to several RHD and AT cars.

4.2L Twin Turbo 370Z (AUSTRALIA)

tao168's Journal

All other vendors have specifically stated that their kits don't fit (or haven't been tested to fit) RHD and AT. I don't really want to be a guinea pig and have to mangle something to get it to fit.

Alkatraz · 03-06-2014, 09:04 PM

Quote:

Originally Posted by elperuano

In the same sentence u used the gtm kit. They make their own kits and oil pan. Haven't seen the kit OR anyone with the oil pan yet I think.

So you're saying that the oil pan is garbage and doesn't fit/work?

jwick · 03-06-2014, 09:07 PM

Quote:

Originally Posted by elperuano

In the same sentence u used the gtm kit. They make their own kits and oil pan. Haven't seen the kit OR anyone with the oil pan yet I think.

Martin82 and his Stage1.5 SC is running the GTM oil pan. I have to admit it's pretty sweet.

elperuano · 03-06-2014, 09:08 PM

Cool. Didn't know they had em in Australia.
Who said garbage? You picking it up in the morning or sumthin? Don't make too much noise!

elperuano · 03-06-2014, 09:10 PM

Quote:

Originally Posted by jwick

Martin82 and his Stage1.5 SC is running the GTM oil pan. I have to admit it's pretty sweet.

That's cool. I was wondering if anyone had it. I forgot martin did. If I'm not mistaken bunch of us got a good laugh out of the end part of his thread. I'm sure the others in the gtm group buy would like to see it.

Alkatraz · 03-06-2014, 09:13 PM

Quote:

Originally Posted by elperuano

Who said garbage? You picking it up in the morning or sumthin? Don't make too much noise!

I thought that you were saying that there is something wrong with the oil pan and that is why I shouldn't mention it in my second post?!?

Anyway......heading off topic, due to confusion....

Alkatraz · 03-06-2014, 09:19 PM

Quote:

Originally Posted by elperuano

That's cool. I was wondering if anyone had it. I forgot martin did. If I'm not mistaken bunch of us got a good laugh out of the end part of his thread. I'm sure the others in the gtm group buy would like to see it.

GTM really need to have access to their manuals on their website! Their manuals look awesome but no one ever seems to know where to find them. The links are there but with no way to get to them!

jwick · 03-06-2014, 09:27 PM

Quote:

Originally Posted by elperuano

That's cool. I was wondering if anyone had it. I forgot martin did. If I'm not mistaken bunch of us got a good laugh out of the end part of his thread. I'm sure the others in the gtm group buy would like to see it.

I caught that too...It was pretty funny

SS_Firehawk · 03-06-2014, 10:30 PM

During the building phase, it was borderline infuriating getting updates from GTM. They did cut me a sweet deal on the kit, and was only 30 days late for my time hack. Which looking back in retrospect is an act of God. They shipped all my parts I sold to the people who bought them, and packeged it really well. They even cleaned up my oil cooler for resale after one sale fell through because it looked like hell. They allowed me to make payments at my convienience (as long as it was paid up by delivery), so I sent them a mortgage sized check bi-weekly. When picking up the car, I was there for two days and roughly 8 hours each day waiting. That was annoying and my Wife was running low on patience.

The craftsmanship on the kit though is superb. Everything fits so tight, it's a miracle everything made it in. The intercoolers are millimeters behind the crash bar, the oil coolers barely fit between the intercoolers and the bumper. The SC oil coolers sit behind the fangs and the filters are right there too. The radiator, fans and shroud are b!tchen and look boss in the engine bay. I got a good first hand look of the oil pans and the baffling system. I'm happy to have it in my car. It was an inexpensive upgrade.

They installed my sways, rotors, lines, pads, clutch, flywheel, and CSC. Everything fit perfectly and they did an outstanding job with it. They warned me about the clutch being on the ragged edge. I wasn't sure if Sam was trying to upsell me or not so I took my chances. Well, the clutch gets soft when I'm beating on it, especially in the heat. They also shopped around to find the perfect meth tank to install in the hatch. I'm glad they went with what they did. It's large, and all I need to do is cut out the carpet for everything to fit flush (the neck and cap will stick out). I should also mention that they finally unf@cked my O2 sensors. They discovered the wiring problem, the pre cats in the post cat location, and of course the melted chaos. Unfortunately for me, they definitely got their money to diagnose and fix it. I will be fair and say they cut me a deal on the hours.

I consider myself fortunate to have the experience I had with them go well (for the most part). All the parts were already there, but they are too busy for their own good. Every lift has a car, and the floorspace is filled with more cars. Because of this, they didn't start tearing into my car until March (it was picked up and delived at the beginning of December). They ran two initial dyno tests on their dynojet and then their new Mustang dyno. As jobs took priority, mine went into the backburner, but they never told me whether it was on hold or not. That was irritating. If there isn't going to be any meaningful progress, tell me so I'm not expecting it. I had second thoughts about the whole thing a few times, especially after seeing the final bill and how much I dumped into it.

I will give props to Sam for working so much on his broken leg. That whole thing became a downward spiral as most of us know to his health. Those health issues are no excuse for customer service that could use some major improvement, but I noticed and appreciate that. When I went to leave the first time, it was discovered a relay had gone bad to my rear tail lights. I called them and drove back. I was also concerned about some excessive squeaking. They replaced a pulley, the belt, and fixed the relay free of charge. They also topped off my meth and gave me almost an entire gallon for free. When my car destroyed a pulley and belt, Sam didn't hesitate to pick up the car on his dime and fix it. There was no arguing, I sent pics, an email and a call. When waiting at GTM, I had great conversations with nearly all of the GTM staff about opinions, the forum, projects, future products, etc. It was pretty awesome learning about things before they put out the word. So cudos for that as well.

For all the communication problems, the waiting, the money, it all faded when I was able to hear her for the first time. They kept telling me how great it sounded. I heard a familiar tone on the rollers when they strapped her down, but it sounded meaner, deeper down low, sweeter mids, and a howl that would make a wolf feel sheepish. The test drive was a revelation. The car wasn't finished, and looked it, but the power was just so smooth and easy. It was exactly what I had in mind when going with this kit. My Wife even got in on the test drive and it sold every penny I spent on the car to her. It even sold her the idea of getting meth installed. Now a big negative for me is that when I delivered the car to them, it was clean as a whistle. When I got it back, it was dirty as hell, so dirty I had to clean the windshield three times to be able to drive home. It's a small thing that goes a long way. Spend the f@cking money and clean your customers car when you deliver it. This was the same thing when I destroyed the belt. It was returned dirty with belt particles in the engine bay. I'm just now scheduling an appointment to get the engine bay detailed, the car clayed, polished, buffed, and waxed from top to bottom. I'm so busy, I can't even clean my own damn car.

In closing, I'm aware of GTM's shortcomings and their strengths. I'm completely satisfied after having the car for 8 months, and 60/40 with my personal dealings with GTM over the course of a year. If I were to build my motor by choice, or because I killed it, I would definitely stil consider them. Okay, now you guys can continue your bjtching

03-06-2014, 08:38 PM	#1 (permalink)
Alkatraz Base Member Join Date: May 2013 Location: Perth Posts: 215 Drives: 2008 Skyline 370GT Rep Power: 12	Forced Induction Kit Vendor Feedback Thread I think that it is a good idea to have a thread where everyone can post up whatever they like about the vendors who are supplying kits to the VQ37 market via this forum. Both positive and negative info is welcome. Bitch, moan, cry, praise, nut-hug, say whatever you feel should be known about the vendors on this forum. This way everything can be in one place and no one should need to post their opinions in other peoples threads. Other threads will then be able to stay on-topic and anyone who has any off-topic positive or negative opinions that they would like to share with the community, wont clutter up legitimate threads. People can express their opinions here and argue them back and forth to their hearts content. At the very least this thread could be entertaining.......

03-06-2014, 08:41 PM	#2 (permalink)
Alkatraz Base Member Join Date: May 2013 Location: Perth Posts: 215 Drives: 2008 Skyline 370GT Rep Power: 12	I'll start...... Boosted Performance Single Turbo Kit looks awesome. I love the handmade aspect of it and the obvious love and attention to detail that is being put into every kit. That being said, its gay because it wont fit my car! Fast Intentions TT Kit looks like it was carved by the very hands of God himself! I would love to be able to match it up to my FI full 2.5inch exhaust and the quality would be amazing! That being said, its gay because it wont fit my car! GTM TT kits looks great. i love the fact that they have developed their own parts (Oil pan etc.) and that it will fit any VQ37 on the planet. That being said, its gay because I have been waiting forever for it and still don't know when (if?) it will arrive! elperuano and jlo370z like this.

03-06-2014, 10:30 PM	#15 (permalink)
SS_Firehawk Premium Member Join Date: Oct 2011 Location: Tampa Posts: 4,142 Drives: 13' Magma Red Nismo Rep Power: 7334	During the building phase, it was borderline infuriating getting updates from GTM. They did cut me a sweet deal on the kit, and was only 30 days late for my time hack. Which looking back in retrospect is an act of God. They shipped all my parts I sold to the people who bought them, and packeged it really well. They even cleaned up my oil cooler for resale after one sale fell through because it looked like hell. They allowed me to make payments at my convienience (as long as it was paid up by delivery), so I sent them a mortgage sized check bi-weekly. When picking up the car, I was there for two days and roughly 8 hours each day waiting. That was annoying and my Wife was running low on patience. The craftsmanship on the kit though is superb. Everything fits so tight, it's a miracle everything made it in. The intercoolers are millimeters behind the crash bar, the oil coolers barely fit between the intercoolers and the bumper. The SC oil coolers sit behind the fangs and the filters are right there too. The radiator, fans and shroud are b!tchen and look boss in the engine bay. I got a good first hand look of the oil pans and the baffling system. I'm happy to have it in my car. It was an inexpensive upgrade. They installed my sways, rotors, lines, pads, clutch, flywheel, and CSC. Everything fit perfectly and they did an outstanding job with it. They warned me about the clutch being on the ragged edge. I wasn't sure if Sam was trying to upsell me or not so I took my chances. Well, the clutch gets soft when I'm beating on it, especially in the heat. They also shopped around to find the perfect meth tank to install in the hatch. I'm glad they went with what they did. It's large, and all I need to do is cut out the carpet for everything to fit flush (the neck and cap will stick out). I should also mention that they finally unf@cked my O2 sensors. They discovered the wiring problem, the pre cats in the post cat location, and of course the melted chaos. Unfortunately for me, they definitely got their money to diagnose and fix it. I will be fair and say they cut me a deal on the hours. I consider myself fortunate to have the experience I had with them go well (for the most part). All the parts were already there, but they are too busy for their own good. Every lift has a car, and the floorspace is filled with more cars. Because of this, they didn't start tearing into my car until March (it was picked up and delived at the beginning of December). They ran two initial dyno tests on their dynojet and then their new Mustang dyno. As jobs took priority, mine went into the backburner, but they never told me whether it was on hold or not. That was irritating. If there isn't going to be any meaningful progress, tell me so I'm not expecting it. I had second thoughts about the whole thing a few times, especially after seeing the final bill and how much I dumped into it. I will give props to Sam for working so much on his broken leg. That whole thing became a downward spiral as most of us know to his health. Those health issues are no excuse for customer service that could use some major improvement, but I noticed and appreciate that. When I went to leave the first time, it was discovered a relay had gone bad to my rear tail lights. I called them and drove back. I was also concerned about some excessive squeaking. They replaced a pulley, the belt, and fixed the relay free of charge. They also topped off my meth and gave me almost an entire gallon for free. When my car destroyed a pulley and belt, Sam didn't hesitate to pick up the car on his dime and fix it. There was no arguing, I sent pics, an email and a call. When waiting at GTM, I had great conversations with nearly all of the GTM staff about opinions, the forum, projects, future products, etc. It was pretty awesome learning about things before they put out the word. So cudos for that as well. For all the communication problems, the waiting, the money, it all faded when I was able to hear her for the first time. They kept telling me how great it sounded. I heard a familiar tone on the rollers when they strapped her down, but it sounded meaner, deeper down low, sweeter mids, and a howl that would make a wolf feel sheepish. The test drive was a revelation. The car wasn't finished, and looked it, but the power was just so smooth and easy. It was exactly what I had in mind when going with this kit. My Wife even got in on the test drive and it sold every penny I spent on the car to her. It even sold her the idea of getting meth installed. Now a big negative for me is that when I delivered the car to them, it was clean as a whistle. When I got it back, it was dirty as hell, so dirty I had to clean the windshield three times to be able to drive home. It's a small thing that goes a long way. Spend the f@cking money and clean your customers car when you deliver it. This was the same thing when I destroyed the belt. It was returned dirty with belt particles in the engine bay. I'm just now scheduling an appointment to get the engine bay detailed, the car clayed, polished, buffed, and waxed from top to bottom. I'm so busy, I can't even clean my own damn car. In closing, I'm aware of GTM's shortcomings and their strengths. I'm completely satisfied after having the car for 8 months, and 60/40 with my personal dealings with GTM over the course of a year. If I were to build my motor by choice, or because I killed it, I would definitely stil consider them. Okay, now you guys can continue your bjtching Mr.Squeeze, elperuano, axmea? and 3 others like this. __________________ Old Car:GTM TSC'd 550whp / 410lbft tq @ 11.88PSI New Car: Under Construction

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Forced Induction for Noobs...	Slidefox	Forced Induction	48	06-15-2013 12:32 AM
Forced Induction no one to talk to	lineyho	Forced Induction	36	03-27-2013 11:35 PM
Forced induction	stiso	Northern California Region	8	11-28-2011 12:03 PM
Help don't want forced induction!!!!!	Mjthind	Engine & Drivetrain	64	05-04-2011 01:00 PM
Forced induction	Seth G	Forced Induction	13	04-09-2010 12:36 AM

03-06-2014, 08:48 PM	#3 (permalink)
elperuano A True Z Fanatic Join Date: Oct 2011 Location: Southwest FL Posts: 1,374 Drives: G37S Rep Power: 28	I can appreciate your honesty! But like the kit I believe the oil pan should be put in that same sentence.

03-06-2014, 08:51 PM	#4 (permalink)
elperuano A True Z Fanatic Join Date: Oct 2011 Location: Southwest FL Posts: 1,374 Drives: G37S Rep Power: 28	Also how sure are you the gtm kit will fit ur car? Have you seem another aussie ride with the kit? Who is telling you it will fit? Cuz we all know how far his word goes. I'm sure if the gtm is supposed to "fit" you could make the FI kit fit.

03-06-2014, 08:58 PM	#6 (permalink)
elperuano A True Z Fanatic Join Date: Oct 2011 Location: Southwest FL Posts: 1,374 Drives: G37S Rep Power: 28	In the same sentence u used the gtm kit. They make their own kits and oil pan. Haven't seen the kit OR anyone with the oil pan yet I think.

03-06-2014, 09:08 PM	#10 (permalink)
elperuano A True Z Fanatic Join Date: Oct 2011 Location: Southwest FL Posts: 1,374 Drives: G37S Rep Power: 28	Cool. Didn't know they had em in Australia. Who said garbage? You picking it up in the morning or sumthin? Don't make too much noise!