GTM Performance Engineering stage 2 600hp supercharger kits line-up press release

The Dimer · 01-18-2012, 12:24 PM

I don't know what you're looking for specifically but like the radiator, they appear to have automatic transmission stuff on their website (including stage 3 and 4 upgrades). I just don't think they ever did a press release for them.

kosstick · 01-28-2012, 01:23 AM

Hey guys wondering if anyone is having problems with their sc stage 1 or 2 at 7100 rpm my boost and power just drop 100 whp every dyno is the shows it dropping like clockwork, Seb and I are racking our brains trying to figure it out. We believe it's a software issue. Let md know if anyone has any advice!

G37sHKS · 03-21-2012, 09:37 AM

Bumping this thread for update on transmission build...

On GTM site there is stage 3 and 4 but thats just too expensive...

I would like to see a new thread about transmission upgrade to see what exactly i need for 500 torque.

Any update Sam?

Mike@GTM · 03-21-2012, 07:22 PM

Quote:

Originally Posted by G37sHKS

Bumping this thread for update on transmission build...

On GTM site there is stage 3 and 4 but thats just too expensive...

I would like to see a new thread about transmission upgrade to see what exactly i need for 500 torque.

Any update Sam?

We're working on adding parts only packages to our website. Basically, they are master parts kits for our Stage 3 and 4 transmissions. With those parts in hand, all you'll have to do is hand them and your transmission to a qualified automatic transmission builder experienced with performance transmission builds to get them installed properly.

G37sHKS · 03-22-2012, 05:15 AM

Thanks for fast reply.

So what exactly I need for 400-500 torque? talking about daily use car (if that matter)

Z eliminator · 09-27-2012, 07:53 AM

stage 3 GTM SC with fully built 7 AT. with snow meth kit.
I have the stage 2 but im going with the larger SC.and more boost.
The tranney will be here before the SC.
I have a built engine ( GTM parts 20 over bore not built by GTM built built locally i bought the block up here). Not installed yet
I will tun the tranney on my N/A set up as i want to break the 1/4 mile record with a 7 AT all moter.

Z

gbrettin · 09-27-2012, 03:23 PM

Quote:

Originally Posted by Z eliminator

stage 3 GTM SC with fully built 7 AT. with snow meth kit.
I have the stage 2 but im going with the larger SC.and more boost.
The tranney will be here before the SC.
I have a built engine ( GTM parts 20 over bore not built by GTM built built locally i bought the block up here). Not installed yet
I will tun the tranney on my N/A set up as i want to break the 1/4 mile record with a 7 AT all moter.

Z

Hot damn! I'd love to see some video when you are running! Let me know if you post any.

theaudir8fan · 09-27-2012, 01:08 PM

^how much difference is there between the 91 and 92 trim?

XwChriswX · 09-16-2011, 11:20 AM

Quote:

Originally Posted by Jamaica@UAMotorsports

.

You work orders for both brands of FI right? SC/TT?

09-27-2012, 07:53 AM	#6 (permalink)
Z eliminator A True Z Fanatic Join Date: Jul 2009 Location: Ontario Canada Posts: 1,660 Drives: 370 Z 7AT Sports Rep Power: 20	stage 3 GTM SC with fully built 7 AT. with snow meth kit. I have the stage 2 but im going with the larger SC.and more boost. The tranney will be here before the SC. I have a built engine ( GTM parts 20 over bore not built by GTM built built locally i bought the block up here). Not installed yet I will tun the tranney on my N/A set up as i want to break the 1/4 mile record with a 7 AT all moter. Z gbrettin likes this. __________________ 12.343 @114.14 . 4.5 stroker motor is now being built. Dec 1 2015.

09-27-2012, 01:08 PM	#8 (permalink)
theaudir8fan Base Member Join Date: Jul 2011 Location: lonely land up north Posts: 162 Drives: 07 Infiniti G35S PG Rep Power: 15	^how much difference is there between the 91 and 92 trim? __________________ 2007 Infiniti G35S 5AT PG; GTM; KW; Hotchkis; Stillen; Berks; SPC; GT-spec; SxExCx

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GTM Performance Engineering 370Z SUPERCHARGER KIT PRESS RELEASE	SAM@GTM	Forced Induction	1161	02-16-2014 08:21 PM
GTM Performance Engineering Stage 1 Turn key Supercharger kit In house Installation.	SAM@GTM	Forced Induction	311	09-07-2011 03:42 AM
GTM Performance Engineering Stage 1 Turn key Supercharger kit In house Install II.	SAM@GTM	Forced Induction	254	08-11-2010 10:59 AM
MXP Performance - S/S Catback Exhaust Press Release	DriveLineEric	Intake/Exhaust	30	05-18-2010 12:09 PM

01-18-2012, 12:24 PM	#1 (permalink)
The Dimer Track Member Join Date: Mar 2011 Location: Bolingbrook, IL Posts: 632 Drives: 2010 PW 370z Rep Power: 16	I don't know what you're looking for specifically but like the radiator, they appear to have automatic transmission stuff on their website (including stage 3 and 4 upgrades). I just don't think they ever did a press release for them.

01-28-2012, 01:23 AM	#2 (permalink)
kosstick Track Member Join Date: Apr 2011 Location: Los Angles Posts: 668 Drives: G37 Rep Power: 16	Hey guys wondering if anyone is having problems with their sc stage 1 or 2 at 7100 rpm my boost and power just drop 100 whp every dyno is the shows it dropping like clockwork, Seb and I are racking our brains trying to figure it out. We believe it's a software issue. Let md know if anyone has any advice!

03-21-2012, 09:37 AM	#3 (permalink)
G37sHKS A True Z Fanatic Join Date: Feb 2010 Location: Dubai Posts: 1,183 Drives: 09 G37S Coupe 7AT Rep Power: 21	Bumping this thread for update on transmission build... On GTM site there is stage 3 and 4 but thats just too expensive... I would like to see a new thread about transmission upgrade to see what exactly i need for 500 torque. Any update Sam?

03-22-2012, 05:15 AM	#5 (permalink)
G37sHKS A True Z Fanatic Join Date: Feb 2010 Location: Dubai Posts: 1,183 Drives: 09 G37S Coupe 7AT Rep Power: 21	Thanks for fast reply. So what exactly I need for 400-500 torque? talking about daily use car (if that matter)