First top mount single turbo 370Z

roplusbee · 07-31-2011, 12:04 AM

Way to thin outside of the box..............

Ron · 08-02-2011, 07:31 PM

So who is gonna go with another top mount? Twin top mounted that is...

just in case, I know its a GTR

Jamaica · 08-02-2011, 07:36 PM

Quote:

Originally Posted by Ron

So who is gonna go with another top mount? Twin top mounted that is...

just in case, I know its a GTR

Sexy

98intrigue · 08-02-2011, 10:38 PM

WOWWWWW!!! That is beautiful!

Can't wait...my car will be a new car next week!

Red__Zed · 08-02-2011, 10:39 PM

Quote:

Originally Posted by Ron

So who is gonna go with another top mount? Twin top mounted that is...

just in case, I know its a GTR

wish we could fit them like that haha

98intrigue · 08-02-2011, 11:11 PM

Quote:

Originally Posted by Red__Zed

wish we could fit them like that haha

Actually.... there's a possibility they would fit at that angle. I was looking at this on Saturday. The engine bay fender area would have to be bashed in a bit to fit the hot side of the turbo, but it may be able to be done. This would help keep temps down a bit since my downpipe goes across the front of the engine. BUT I'm not about to waste all the money I've alrady put into the piping...I'm only redoing half of it

roplusbee · 08-03-2011, 01:54 AM

Woah......that is wassup right there. Are those HTA35Rs? If so that would be an ultra beast. Def need a built bottom end and strengthened valvetrain.........

98intrigue · 08-08-2011, 06:08 PM

I bit another big bullet today...ordered the CSF radiator from Z1 today. Let's hope this will take care of my coolant temps, because they climb pretty fast at idle.

So now with the bigger radiator and new intake piping, a new tune is in store over the next few weeks...and hopefully I can have a car that's finally 100%!

SPOHN · 08-08-2011, 06:09 PM

Nice. Hopefully soon you won't have to look back.

Dembflyr · 08-08-2011, 06:31 PM

Any pics of the new intake piping yet?

b1adesofcha0s · 08-08-2011, 08:31 PM

Good luck with the cooling man

98intrigue · 08-08-2011, 09:44 PM

Quote:

Originally Posted by Dembflyr

Any pics of the new intake piping yet?

The materials haven't came in yet, so I'm still driving the Z until it's ready to go in the garage.

roplusbee · 08-09-2011, 04:34 AM

Be careful dude...........

98intrigue · 08-15-2011, 10:34 PM

So I dropped off my car today at my friend's house. Things being done:

-Adding 18" Magnaflow resonator to get rid of the rasp
-Replacing band clamp to fix small exhaust leak
-All new 3" equal size/equal length intake piping
-Replacing Precision 750hp intercooler (horizontal fin 31.5"x10.3"x3.5" with 2.75" inlet/outlet) with ProCharger 550hp intercooler (vertical fin 18"x12.5"x3" with 3" inlet/outlet) and being modified for 3" dual inlet/single outlet
-Mounting Tial BOV on hot side of piping
-Rewiring MAFs back to OEM
-Replacing OEM radiator with CSF radiator

After this, the only thing left to do is fix my PS leak and get the car retuned.

Ron · 08-15-2011, 11:25 PM

Oh yeah!! How long is all that work gonna take?

07-31-2011, 12:04 AM	#661 (permalink)
roplusbee A True Z Fanatic Join Date: Dec 2009 Location: Killeen, TX Posts: 2,360 Drives: 2007 350Z NISMO Rep Power: 22	Way to thin outside of the box.............. __________________ 2007 350Z NISMO #0618: Zerolift \| UPREV \| F.I. \| Greddy \| Competition Clutch \| Injector Dynamics \| Aeromotive \| Pioneer \| JL

08-02-2011, 10:38 PM	#664 (permalink)
98intrigue A True Z Fanatic Join Date: Jul 2010 Location: Clearwater, FL Age: 38 Posts: 4,855 Drives: 2014 Viper Rep Power: 429	WOWWWWW!!! That is beautiful! Can't wait...my car will be a new car next week! __________________ Ryan - 2014 Stryker Green Viper Gone - a few Vipers and a couple turbo VQs

08-03-2011, 01:54 AM	#667 (permalink)
roplusbee A True Z Fanatic Join Date: Dec 2009 Location: Killeen, TX Posts: 2,360 Drives: 2007 350Z NISMO Rep Power: 22	Woah......that is wassup right there. Are those HTA35Rs? If so that would be an ultra beast. Def need a built bottom end and strengthened valvetrain......... __________________ 2007 350Z NISMO #0618: Zerolift \| UPREV \| F.I. \| Greddy \| Competition Clutch \| Injector Dynamics \| Aeromotive \| Pioneer \| JL

08-08-2011, 06:08 PM	#668 (permalink)
98intrigue A True Z Fanatic Join Date: Jul 2010 Location: Clearwater, FL Age: 38 Posts: 4,855 Drives: 2014 Viper Rep Power: 429	I bit another big bullet today...ordered the CSF radiator from Z1 today. Let's hope this will take care of my coolant temps, because they climb pretty fast at idle. So now with the bigger radiator and new intake piping, a new tune is in store over the next few weeks...and hopefully I can have a car that's finally 100%! __________________ Ryan - 2014 Stryker Green Viper Gone - a few Vipers and a couple turbo VQs

08-08-2011, 06:09 PM	#669 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 45 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	Nice. Hopefully soon you won't have to look back. __________________

08-02-2011, 07:31 PM	#662 (permalink)
Ron A True Z Fanatic Join Date: Oct 2010 Location: Houston, TX Posts: 3,009 Drives: TT '11 PW Nismo #113 Rep Power: 21	So who is gonna go with another top mount? Twin top mounted that is... just in case, I know its a GTR

08-08-2011, 06:31 PM	#670 (permalink)
Dembflyr Track Member Join Date: Feb 2010 Location: Indiana Posts: 886 Drives: G37S Sedan Rep Power: 16	Any pics of the new intake piping yet? __________________ 2012 G37S Sedan 6MT - Project Practicality 2009-6MT-Sport/Touring-Dembflyr's Journal-TT Build Thread-CAR IS SOLD

08-08-2011, 08:31 PM	#671 (permalink)
b1adesofcha0s A True Z Fanatic Join Date: Jan 2011 Location: MD Posts: 40,963 Drives: HypeTrain Choo Choo! Rep Power: 141	Good luck with the cooling man __________________ Project: b1adeZmobile (2009 370Z) \| Uprev Tune by AAM Competition \| Berk Exhaust Project: b1adeZmobile 2.0 (2014 C7 Z51) \| Corsa Xtreme Exhaust

08-09-2011, 04:34 AM	#673 (permalink)
roplusbee A True Z Fanatic Join Date: Dec 2009 Location: Killeen, TX Posts: 2,360 Drives: 2007 350Z NISMO Rep Power: 22	Be careful dude........... __________________ 2007 350Z NISMO #0618: Zerolift \| UPREV \| F.I. \| Greddy \| Competition Clutch \| Injector Dynamics \| Aeromotive \| Pioneer \| JL

08-15-2011, 10:34 PM	#674 (permalink)
98intrigue A True Z Fanatic Join Date: Jul 2010 Location: Clearwater, FL Age: 38 Posts: 4,855 Drives: 2014 Viper Rep Power: 429	So I dropped off my car today at my friend's house. Things being done: -Adding 18" Magnaflow resonator to get rid of the rasp -Replacing band clamp to fix small exhaust leak -All new 3" equal size/equal length intake piping -Replacing Precision 750hp intercooler (horizontal fin 31.5"x10.3"x3.5" with 2.75" inlet/outlet) with ProCharger 550hp intercooler (vertical fin 18"x12.5"x3" with 3" inlet/outlet) and being modified for 3" dual inlet/single outlet -Mounting Tial BOV on hot side of piping -Rewiring MAFs back to OEM -Replacing OEM radiator with CSF radiator After this, the only thing left to do is fix my PS leak and get the car retuned. __________________ Ryan - 2014 Stryker Green Viper Gone - a few Vipers and a couple turbo VQs

08-15-2011, 11:25 PM	#675 (permalink)
Ron A True Z Fanatic Join Date: Oct 2010 Location: Houston, TX Posts: 3,009 Drives: TT '11 PW Nismo #113 Rep Power: 21	Oh yeah!! How long is all that work gonna take? Last edited by Ron; 08-15-2011 at 11:28 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
FS/FT: 300zx w/ Skyline GTR RB26 Single Turbo Swap 5 Speed	Z-Creations	Cars for sale (Private Classifieds)	0	01-23-2011 02:06 PM
First STS rear mount turbo 370Z???	atx370z	Nissan 370Z General Discussions	24	10-14-2010 02:53 PM
*370z needed: Single turbo kit development*	Chris@FsP	Texas	0	01-06-2010 02:05 PM
300ZX vs. Single Turbo Supras	Mercennarius	Other Vehicles	9	09-14-2009 08:59 PM
Will we see a SINGLE turbo kit?	Brazilbro	Forced Induction	17	07-03-2009 04:03 PM