Forced Induction Finished Builds

Chuck33079 · 03-25-2019, 01:37 PM

Quote:

Originally Posted by 370zbeast

AAM IN MARYLAND. Sorry almost done, hope to get it back in West Texas next week.

Make sure you take it to a qualified shop when you get it home. Don't just take it out and start romping on it. AAM has had a lot of major issues over the last few years, and the quality of their work has fallen through the floor.

370zbeast · 03-26-2019, 08:00 PM

Thanks I'll be careful.

370Z40thed · 09-14-2019, 08:31 PM

Good evening everyone! I have a quick question! who has here installed the Greddy TT kit by themselves!? how long did it take? how hard was the process? I have mechanic experience but I'm just wanting answers before I take my car apart. thank you!

Spooler · 09-14-2019, 09:11 PM

Quote:

Originally Posted by 370Z40thed

Good evening everyone! I have a quick question! who has here installed the Greddy TT kit by themselves!? how long did it take? how hard was the process? I have mechanic experience but I'm just wanting answers before I take my car apart. thank you!

Phunk had one and installed it himself.

solidus · 09-15-2019, 09:34 AM

If you have mechanical experience shouldn't be a problem as long as you're comfy dropping the motor. Basically a header swap, then adding all the woosh accessories.

Martijn_b · 01-18-2020, 01:31 PM

Went on the dyno today: 622bhp and 691nm of torque (at the block). 11psi and AAM stg 2 kit on stock engine and 93 octane. Tune by Specialtyz.

Sent from my SM-G973F using Tapatalk

V1H · 01-18-2020, 02:59 PM

Quote:

Originally Posted by Martijn_b

Went on the dyno today: 622bhp and 691nm of torque (at the block). 11psi and AAM stg 2 kit on stock engine and 93 octane. Tune by Specialtyz.

Sent from my SM-G973F using Tapatalk

Wow, 11psi on stock block and no knock with ordinary dino juice? How?
Impressive!
I am limited to ~6psi due to knock with Shell VPower (98)

Sent from my iPhone using Tapatalk

sirnixalot · 01-18-2020, 03:16 PM

Quote:

Originally Posted by V1H

Wow, 11psi on stock block and no knock with ordinary dino juice? How?
Impressive!
I am limited to ~6psi due to knock with Shell VPower (98)

Sent from my iPhone using Tapatalk

You should find a different tuner. I'm runnnig 14psi on a much smaller turbine turbo on 92-93 (R+M)/2 octane which is 96 or 97 Ron (your 98 is 98 ron).

Martijn_b · 01-18-2020, 03:21 PM

Rene, can it be that you are running a lot of timing? I made a little over 500bhp on 6psi.

You should be easily able to push 10-11 psi and keep a safe margin.

Sent from my SM-G973F using Tapatalk

solidus · 01-18-2020, 06:23 PM

Quote:

Originally Posted by Martijn_b

Rene, can it be that you are running a lot of timing? I made a little over 500bhp on 6psi.

You should be easily able to push 10-11 psi and keep a safe margin.

Sent from my SM-G973F using Tapatalk

That guy didn't ingest the details of your post. If he did he would've recognized you were tuned by one of the best in the world via remote. Knowing that he would understand that Seb tunes with the interest of safety of the engine and longevity as well as optimal power for what you're working with.
Seb absolutely won't push the limits if he's not hands on with your car on the dyno.......I've tried.

redondoaveb · 01-18-2020, 08:45 PM

Quote:

Originally Posted by solidus

That guy didn't ingest the details of your post. If he did he would've recognized you were tuned by one of the best in the world via remote. Knowing that he would understand that Seb tunes with the interest of safety of the engine and longevity as well as optimal power for what you're working with.
Seb absolutely won't push the limits if he's not hands on with your car on the dyno.......I've tried.

Seb won't, even if it's in his hands unless you really push him to do it.

solidus · 01-18-2020, 09:02 PM

Quote:

Originally Posted by redondoaveb

Seb won't, even if it's in his hands unless you really push him to do it.

Lol!! Tell me about it. I've tried all kinds of Jedi tricks and Seb shut me down with logic. The tune may be soft but you know it's safe. And "Soft" is a matter of perspective between people who give a crap and people with 20k in reserve and a builder and block on standby.

redondoaveb · 01-18-2020, 09:05 PM

Quote:

Originally Posted by solidus

Lol!! Tell me about it. I've tried all kinds of Jedi tricks and Seb shut me down with logic. The tune may be soft but you know it's safe. And "Soft" is a matter of perspective between people who give a crap and people with 20k in reserve and a builder and block on standby.

Exactly. He explained it real simple for me. Is an extra 30whp worth needing a new motor.

Spooler · 01-18-2020, 10:10 PM

Quote:

Originally Posted by solidus

Lol!! Tell me about it. I've tried all kinds of Jedi tricks and Seb shut me down with logic. The tune may be soft but you know it's safe. And "Soft" is a matter of perspective between people who give a crap and people with 20k in reserve and a builder and block on standby.

Are you picking on me Al ?

solidus · 01-19-2020, 01:38 AM

Quote:

Originally Posted by Spooler

Are you picking on me Al ?

Lol! If I had 5 or 6 puppies laying around I could maybe rock 30psi just to see some sparks.

09-14-2019, 08:31 PM	#843 (permalink)
370Z40thed Base Member Join Date: Feb 2018 Location: Texas Posts: 2 Drives: 370z 10 manual Rep Power: 8	Greddy Twin turbo kit installation Good evening everyone! I have a quick question! who has here installed the Greddy TT kit by themselves!? how long did it take? how hard was the process? I have mechanic experience but I'm just wanting answers before I take my car apart. thank you!

01-18-2020, 01:31 PM	#846 (permalink)
Martijn_b Enthusiast Member Join Date: Jan 2018 Location: Netherlands Posts: 280 Drives: 2010 370z MB 6MT Rep Power: 3787	Went on the dyno today: 622bhp and 691nm of torque (at the block). 11psi and AAM stg 2 kit on stock engine and 93 octane. Tune by Specialtyz. Sent from my SM-G973F using Tapatalk Rusty, Hotrodz and V1H like this. __________________ Instagram: Boosted_Fairlady Last edited by Martijn_b; 01-18-2020 at 01:38 PM.

01-18-2020, 03:21 PM	#849 (permalink)
Martijn_b Enthusiast Member Join Date: Jan 2018 Location: Netherlands Posts: 280 Drives: 2010 370z MB 6MT Rep Power: 3787	Rene, can it be that you are running a lot of timing? I made a little over 500bhp on 6psi. You should be easily able to push 10-11 psi and keep a safe margin. Sent from my SM-G973F using Tapatalk Hotrodz likes this. __________________ Instagram: Boosted_Fairlady

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
forced induction in australia	andylena	Australia/New Zealand	23	09-15-2016 12:52 PM
Forced Induction Reliability	spearfish25	Forced Induction	58	09-08-2013 12:14 PM
Forced induction	Seth G	Forced Induction	13	04-09-2010 12:36 AM
Forced Induction gains and 7AT	kannibul	Forced Induction	18	10-14-2009 12:36 PM
Best trans for forced induction	madweazl	Engine & Drivetrain	24	08-07-2009 04:20 PM

03-26-2019, 08:00 PM	#842 (permalink)
370zbeast Base Member Join Date: Dec 2015 Location: West Texas Posts: 20 Drives: 2015 370 nismo Rep Power: 10	Thanks I'll be careful.

09-15-2019, 09:34 AM	#845 (permalink)
solidus Track Member Join Date: Oct 2014 Location: Orlando, Florida Posts: 694 Drives: 15' Nismo Black 6MT Rep Power: 10081	If you have mechanical experience shouldn't be a problem as long as you're comfy dropping the motor. Basically a header swap, then adding all the woosh accessories.