Nissan 370Z Forum
Page 13 of 40 « First 31112 13 141523 Last »
Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)
-   Forced Induction (http://www.the370z.com/forced-induction/)
-   -   GTM Performance Engineering VQ45VHR-Our Journey to The 1000 HP and Beyond (http://www.the370z.com/forced-induction/20809-gtm-performance-engineering-vq45vhr-our-journey-1000-hp-beyond.html)

G37Sam 09-22-2010 05:06 AM
Quote:
Originally Posted by shumby (Post 731354)
I am so calling you wheni get homne. i got a ew things to run by ya.
I never knew you spoke Russian :roflpuke2:

shumby 09-22-2010 05:56 AM
lol. i am typing on a russian keyboard had to get the letters right all the time.

DIGItonium 09-22-2010 07:09 AM
Quote:
Originally Posted by SAM@GTM (Post 731335)
Yes we will offer an upgraded strut bar to work with the GTR manifold. As for oil changes, nothing spacial that you will have to do beside taking the plastic cover to get to the engine fill cap .

Sam
Ah... :tup: How about the throttle bodies? Is the GT-R one in place temporarily for fitment purpose?

fstrnldr 09-22-2010 09:36 AM
i believe the throttle bodies are the same ... just inverted on the VR engine vs the VQ.

Horses pushes 09-22-2010 11:56 AM
Quote:
Originally Posted by spearfish25 (Post 586321)
Are we talking about building a car or sending a man to Mars? :)
sending a man to Mars. and in this case we need 8 point harness :driving:

JB-370z 09-22-2010 12:16 PM
Quote:
Originally Posted by DIGItonium (Post 731405)
Ah... :tup: How about the throttle bodies? Is the GT-R one in place temporarily for fitment purpose?
Dont think you will get this info for a hott minute sir. I would like to know also.

SAM@GTM 09-22-2010 01:12 PM
Those are the 370Z throttle body in that pic, they bolt right up to the GTR manifold.

Sam

Nixlimited 09-22-2010 01:15 PM
Quote:
Originally Posted by SAM@GTM (Post 731010)
Here is Some teaser pics of the GTR manifold, this was a big undertaken to say the least.

Sam
Can you share any flow-bench results?

Jamaica 09-22-2010 01:36 PM
How much?

DIGItonium 09-22-2010 04:23 PM
Quote:
Originally Posted by SAM@GTM (Post 731944)
Those are the 370Z throttle body in that pic, they bolt right up to the GTR manifold.

Sam
Sweet! :excited: I'm guessing the VR38 engine cover can be cut to clear the oil cap. Thanks again for your hard work. I'm definitely looking forward to the next few months to get the VR38 manifold and GTM Stage 1 kit installed.

WarmAndSCSI 09-22-2010 04:55 PM
No sure why you'd want the cover... that's a pretty manifold if you polish or powdercoat it!

JB-370z 09-22-2010 05:51 PM
Cannot get over how sexy these things are........I will get the GTR mani. for sure.

bullitt5897 09-28-2010 05:59 PM
Just saw the car today... Omg it's sexy!

JB-370z 09-28-2010 07:12 PM
Quote:
Originally Posted by SAM@GTM (Post 731010)
Here is Some teaser pics of the GTR manifold, this was a big undertaken to say the least.

Sam

Sam told me how much time and effort went into making this work. I think it will all pay off because I know a bunch of people going to get em' when the production model comes into effect and I am one of those people. Thanks Bullitt for being the test subject. ;)
The thing I like anout these is if the silver is too boring for you, you can customize the color, even polish is possible. Not sure if Sam will offer custom options but the mani. is a work of art no matter how you look at it. :tiphat:

Edit: I would love to see a carbon mani. cover on that bad boy ;)


http://passwordjdm.com/images/products/2585_2.jpg

http://passwordjdm.com/images/products/2585_4.jpg

bullitt5897 09-28-2010 07:23 PM
You guys should see the lower manifold!!! It's a work of art!

JB-370z 09-28-2010 07:31 PM
Quote:
Originally Posted by bullitt5897 (Post 741615)
You guys should see the lower manifold!!! It's a work of art!
So show us!!!!!!!:happydance:

bullitt5897 09-28-2010 07:53 PM
Not yet hehehe ;)

JB-370z 09-28-2010 08:19 PM
Quote:
Originally Posted by bullitt5897 (Post 741673)
Not yet hehehe ;)
You suck @ Life Bullitt :p

bullitt5897 09-28-2010 09:09 PM
Lmao!!! Omg you crack me up JB

DIGItonium 09-29-2010 12:21 AM
So it turns out the lower manifold needed to be replaced? It makes sense considering how Nissan reversed the orientation and shape of the runners. I'm eagerly waiting for this before pulling the trigger to get the FI project started. My VR38 intake collector is probably collecting dust at FsP. :-P

1slow370 09-29-2010 02:48 AM
You'll need some kind of sticker or license plate or something that says PSHIGH somewhere when you get it running.

dnasty370z 09-29-2010 09:11 AM
Sorry Im a little late on this thread is both the upper and lower mani's that gtm is making specifically for FI motors or can someone see any benefits out a N/A motor as well?If you could PM me a response thank's guys?

bullitt5897 09-29-2010 09:53 AM
Dnasty this manifold is completely untested and this car is the very first car to recieve the conversion we will have a better idea of performance in about a week or two. Right now we are running around trying to get everything on the car for the photoshoot today. I will post up some teasers tonight ;)

dnasty370z 09-29-2010 01:28 PM
Quote:
Originally Posted by bullitt5897 (Post 742253)
Dnasty this manifold is completely untested and this car is the very first car to recieve the conversion we will have a better idea of performance in about a week or two. Right now we are running around trying to get everything on the car for the photoshoot today. I will post up some teasers tonight ;)
ok thanks for the info i hope all goes well! i'll keep my eye on this thread for sure :tup:

SAM@GTM 09-29-2010 02:46 PM

FuszNissan 09-29-2010 02:53 PM
Sick! :drool:

KaienZ34 09-29-2010 04:16 PM
Quote:
Originally Posted by JB-370z (Post 741599)
Sam told me how much time and effort went into making this work. I think it will all pay off because I know a bunch of people going to get em' when the production model comes into effect and I am one of those people. Thanks Bullitt for being the test subject. ;)
The thing I like anout these is if the silver is too boring for you, you can customize the color, even polish is possible. Not sure if Sam will offer custom options but the mani. is a work of art no matter how you look at it. :tiphat:

Edit: I would love to see a carbon mani. cover on that bad boy ;)


http://passwordjdm.com/images/products/2585_2.jpg

http://passwordjdm.com/images/products/2585_4.jpg
:yum::yum::yum: ME LIKEY !!!

KaienZ34 09-29-2010 04:19 PM
:xmastup: Damn that some hot stuff !

kevr6 09-29-2010 05:19 PM
Daaammmm!!!! Sweet indeed!! The best looking 370Zs are going to be between GA and CA. Nice job!!

Viera 09-29-2010 05:36 PM
Your car looks amazing..............I can't to see it in person!

Jamaica 09-29-2010 05:45 PM
ya i want that exhaust

JB-370z 09-29-2010 06:29 PM
http://i313.photobucket.com/albums/l...130238copy.jpg

Are these Ti tips???? I want!

bullitt5897 09-29-2010 07:19 PM
Those are $500 agency power gtr tips you can find them online around $450...

Flyboy 09-29-2010 09:26 PM
Quote:
Originally Posted by bullitt5897 (Post 743344)
Those are $500 agency power gtr tips you can find them online around $450...
why post the Price...?

JB-370z 09-29-2010 09:33 PM
Quote:
Originally Posted by Flyboy (Post 743542)
why post the Price...?
Last time I checked it was a public "informative" place where people share ideas and information. I might be wrong though

bullitt5897 09-29-2010 09:44 PM
The only reason I shared the price is because people need to understand the costs involved with the custom exhaust. This can be replicated however it's gonna be loud and expensive lol. The car hasn't even been cranked and I am already excited!!!

bullitt5897 09-29-2010 09:46 PM
Quote:
Originally Posted by jamaica951 (Post 743238)
ya i want that exhaust
Where were you ho!!! You was supposed to come out and see the car first hand! It's all good you just get to wait... Ohhh crap ur local u will hear it run before me :( lol

FuszNissan 09-29-2010 09:54 PM
Quote:
Originally Posted by bullitt5897 (Post 743344)
Those are $500 agency power gtr tips you can find them online around $450...
Lol...2k in just tips. Your the man!

bullitt5897 09-29-2010 10:13 PM
No, $500 for the set... retard... Note to self don't let lou write the invoice on my new car... Let the sales guy do it!!!

SAM@GTM 09-29-2010 11:00 PM
Here is another pic with the Maf pipes and bov's installed.

Sam



All times are GMT -5. The time now is 08:19 AM.
Page 13 of 40 « First 31112 13 141523 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2