GTM Performance Engineering Stage 1 Turn key Supercharger kit In house Install II.

m4a1mustang · 07-21-2010, 02:40 PM

Though I seem to remember the TR3650 trans in my Mustang was rated at 350 lb-ft, though we had plenty of guys pushing 500lb-ft or more through them and they were (seemingly) OK.

LiquidZ · 07-21-2010, 03:57 PM

Quote:

Originally Posted by m4a1mustang

Though I seem to remember the TR3650 trans in my Mustang was rated at 350 lb-ft, though we had plenty of guys pushing 500lb-ft or more through them and they were (seemingly) OK.

Just a thought, but a component is only as strong as its weakest link. Maybe the clutch is the limiting factor?

m4a1mustang · 07-21-2010, 04:19 PM

Quote:

Originally Posted by LiquidZ

Just a thought, but a component is only as strong as its weakest link. Maybe the clutch is the limiting factor?

This is what I was wondering... which part of the transmission is rated at 332 lb-ft...

DarkZide · 07-21-2010, 06:13 PM

Quote:

Originally Posted by m4a1mustang

Though I seem to remember the TR3650 trans in my Mustang was rated at 350 lb-ft, though we had plenty of guys pushing 500lb-ft or more through them and they were (seemingly) OK.

The 4.6l SOHC GT engine makes 300 crank tq stock and dynos around 260-270 wheel tq. I had a 2001 that i ran up to a 150 shot on which takes it to at or above 400 wheel tq and I never had an issue. The stock clutches were very very good, as well.

m4a1mustang · 07-21-2010, 06:23 PM

Quote:

Originally Posted by DarkZide

The 4.6l SOHC GT engine makes 300 crank tq stock and dynos around 260-270 wheel tq. I had a 2001 that i ran up to a 150 shot on which takes it to at or above 400 wheel tq and I never had an issue. The stock clutches were very very good, as well.

Yeah, I know they were pretty stout. I had a 2003. Was your 2001 a T5 or TR3650? I think they made the switch (to TR3650) mid-year 2001.

NYBladeZ · 07-21-2010, 06:39 PM

I had the 3650 heavily modded with no problems. I think the Z transmission can hold upwards of 400lbs/tq, does anyone know how the z33 trannys held up and if they are the same manufacturer?

Xan · 07-21-2010, 06:56 PM

Quote:

Originally Posted by NYBladeZ

I had the 3650 heavily modded with no problems. I think the Z transmission can hold upwards of 400lbs/tq, does anyone know how the z33 trannys held up and if they are the same manufacturer?

350Z's had the same manual...

Remember that 332LbFt is 450Nm...

DarkZide · 07-21-2010, 06:58 PM

Quote:

Originally Posted by m4a1mustang

Yeah, I know they were pretty stout. I had a 2003. Was your 2001 a T5 or TR3650? I think they made the switch (to TR3650) mid-year 2001.

I had the TR-3650. I had a late year built 01 (November). It seemed like the part that broke first on the TR3650s (when they did break) was the input shaft.

m4a1mustang · 07-21-2010, 06:59 PM

Quote:

Originally Posted by DarkZide

I had the TR-3650. I had a late year built 01 (November). It seemed like the part that broke first on the TR3650s (when they did break) was the input shaft.

Yup, input shaft issues. That was really all I ever heard of. That and there was a TSB on the 2nd gear synchro.

RCZ · 07-30-2010, 12:32 PM

did this car ever work?

m4a1mustang · 07-30-2010, 12:42 PM

Quote:

Originally Posted by RCZ

did this car ever work?

SAM@GTM · 07-30-2010, 01:07 PM

We did end up going with the black coating so it took a little longer. here is few pics for now, we will have a full update in the next few days .

Also planing on bringing few cars to the up coming Fontana Nissan meet for anyone interested to see the product first hand .

Sam

SAM@GTM · 07-30-2010, 01:13 PM

Here is the link

It's Coming...Fontana Nissan Meet 2

Hope to see you there .

Sam

RCZ · 07-30-2010, 03:21 PM

424STD? Whats that in SAE?

XwChriswX · 07-30-2010, 03:32 PM

Lookin forward to seeing your display Sam!

07-21-2010, 02:40 PM	#136 (permalink)
m4a1mustang A True Z Fanatic Join Date: Feb 2009 Location: Northern VA Posts: 55,385 Drives: on two wheels Rep Power: 6963	Though I seem to remember the TR3650 trans in my Mustang was rated at 350 lb-ft, though we had plenty of guys pushing 500lb-ft or more through them and they were (seemingly) OK. __________________ - Steve Zs & Coffee - Saturdays at 10AM in Fairfax, VA and Columbia, MD (Click the banner!) LIKE us on Facebook!

07-21-2010, 06:39 PM	#141 (permalink)
NYBladeZ A True Z Fanatic Join Date: Apr 2009 Location: New York Posts: 2,158 Drives: Lotus Exige S Rep Power: 21	I had the 3650 heavily modded with no problems. I think the Z transmission can hold upwards of 400lbs/tq, does anyone know how the z33 trannys held up and if they are the same manufacturer? __________________ 2009 Carbon Fiber/Red 370z aka Trish: Sports Package, Meisterschaft full catback, Fast Intentions Longtube Headers, Injen Long Tube Intakes, UpRev Tune: Sold 2008 Lotus Exige S Club Racer aka Bella, always leaves me smiling

07-30-2010, 01:07 PM	#147 (permalink)
SAM@GTM NOT AN ACTIVE SPONSOR. DO NOT BUY Join Date: Dec 2008 Location: CALIFORNIA Posts: 913 Drives: 370Z Rep Power: 18	We did end up going with the black coating so it took a little longer. here is few pics for now, we will have a full update in the next few days . Also planing on bringing few cars to the up coming Fontana Nissan meet for anyone interested to see the product first hand . Sam Last edited by SAM@GTM; 07-30-2010 at 01:09 PM.

07-30-2010, 03:32 PM	#150 (permalink)
XwChriswX WFLYIDNNE Join Date: Jul 2009 Location: In The Fastlane Posts: 50,648 Drives: 02 GDB WRX Rep Power: 453	Lookin forward to seeing your display Sam! __________________ Bonnie - Stage 2, Audio build coming this fall! R.I.P. Abby 3/29/10 - 3/30/14

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GTM Performance Engineering 370Z SUPERCHARGER KIT PRESS RELEASE	SAM@GTM	Forced Induction	1161	02-16-2014 08:21 PM
GTM Performance Engineering Stage 1 Turn key Supercharger kit In house Installation.	SAM@GTM	Forced Induction	311	09-07-2011 03:42 AM
GTM Performance Engineering & Forged Performance	azn370z	Forced Induction	59	04-14-2010 12:07 AM

07-30-2010, 12:32 PM	#145 (permalink)
RCZ A True Z Fanatic Join Date: Nov 2008 Location: Miami Posts: 6,403 Drives: '09 370Z Rep Power: 1119	did this car ever work?

07-30-2010, 01:13 PM	#148 (permalink)
SAM@GTM NOT AN ACTIVE SPONSOR. DO NOT BUY Join Date: Dec 2008 Location: CALIFORNIA Posts: 913 Drives: 370Z Rep Power: 18	Here is the link It's Coming...Fontana Nissan Meet 2 Hope to see you there . Sam

07-30-2010, 03:21 PM	#149 (permalink)
RCZ A True Z Fanatic Join Date: Nov 2008 Location: Miami Posts: 6,403 Drives: '09 370Z Rep Power: 1119	424STD? Whats that in SAE?