STILLEN 370Z Supercharger System - Announcement!!!

Equinox · 04-07-2010, 12:16 PM

I take it those are oil feed lines going to the intake manifold - which btw looks 100% better than that stock waffle ****. I wonder if Stillen would be williing to weld AN fitting so stainless braid can be run

[edit]
they are coolant

G Fo12ce · 04-07-2010, 12:26 PM

I think you mean coolant lines no? Also if those are threaded in (looks like they may be) I think you can get angled AN fittings to re-do the lines.

LiquidZ · 04-07-2010, 12:30 PM

Quote:

Originally Posted by Equinox

I take it those are oil feed lines going to the intake manifold - which btw looks 100% better than that stock waffle ****. I wonder if Stillen would be williing to weld AN fitting so stainless braid can be run

They are coolant lines for the intercooler.

RCZ · 04-07-2010, 12:44 PM

Quote:

Originally Posted by Equinox

I take it those are oil feed lines going to the intake manifold - which btw looks 100% better than that stock waffle ****. I wonder if Stillen would be williing to weld AN fitting so stainless braid can be run

Those are water lines. The kit uses an air-to-water system for cooling the compressed air. There is a water filled heat exchanger inside the intake manifold.

Like Gforce said, they look to be threaded and therefore you should be able to change them out.

04-07-2010, 12:16 PM	#1 (permalink)
Equinox Track Member Join Date: Jul 2009 Location: Beaumont, TX Posts: 685 Drives: 06 Porsche Carrera S Rep Power: 20	I take it those are oil feed lines going to the intake manifold - which btw looks 100% better than that stock waffle **. I wonder if Stillen would be williing to weld AN fitting so stainless braid can be run [edit] they are coolant __________________ Check out my Albums '13 Subaru WRX STi \| '06 Porsche 911 Carrera S (SOLD) \| '96 Mazda RX-7 6.0L V8 RHD (SOLD) \| '09 Nissan Nismo** #0058 (SOLD) Last edited by Equinox; 04-07-2010 at 01:03 PM.

04-07-2010, 12:26 PM	#2 (permalink)
G Fo12ce Premium Member Join Date: Nov 2009 Location: Socal Posts: 996 Drives: Sold! Rep Power: 53	I think you mean coolant lines no? Also if those are threaded in (looks like they may be) I think you can get angled AN fittings to re-do the lines. __________________ Nismo Suspension: New Owners Check Here! Last edited by G Fo12ce; 04-07-2010 at 12:29 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GT Motorsports: 370Z Supercharger system development	SAM@GTM	Forced Induction	1396	02-02-2014 10:54 PM
STILLEN 370Z Dual Exhaust System w/pricing	AK370Z	STILLEN	25	01-03-2011 07:49 PM
Preparation for the STILLEN supercharger	Kyle@STILLEN	Forced Induction	1087	03-13-2010 05:59 AM
Stillen Supercharger estimates???	NewYorkJon34	Forced Induction	454	01-22-2010 11:05 PM
Will Stillen Supercharger & G3 intakes Connect?	NewYorkJon34	Forced Induction	23	10-31-2009 12:09 AM