STILLEN 370Z Supercharger System - Announcement!!!

Kyle@STILLEN · 07-03-2014, 12:00 PM

Quote:

Originally Posted by whiddles

Quote:

Originally Posted by 1slow370

when round orings go square with frayed edges it is almost a sure sign of to thick of a ring or too shallaw of a groove, o-rings need only have 10-20% compression on a face seal so if it were a 2.0mm oring it needs a groove that is 1.7mm deep. Since it is a low pressure application it really need be only 10% if it were for the oil system then i would say 20-25%

The O rings included in the supercharger kit are square, not round.

The images posted above were posted by Whiddles and illustrate what they look like after he cleaned off the RTV silicone which was improperly applied.

whiddles · 07-03-2014, 12:11 PM

like how kyle is turning it into a install error war. This thread was to discuss the water cooler letting go, unrelated to throttle bodies. Kyle you want me to post all my communication with you and Josh and where we sent my car to for installs and to correct some errors on your dime? Im not here to bash. Im here to see if this needs to be looked at any further or not.

either way with o rings or not it all was done through stillen now stillen says its installed incorrectly. funny. Kyle okay even to replace your inner cooler core is over $580 and then you did discount it for me but its still to me unfair

whiddles · 07-03-2014, 12:30 PM

Stillen o-ring picture sent to me from Trent

mine

ANMVQ · 07-03-2014, 02:21 PM

Quote:

Originally Posted by Kyle@STILLEN

The O rings included in the supercharger kit are square, not round.

The images posted above were posted by Whiddles and illustrate what they look like after he cleaned off the RTV silicone which was improperly applied.

So the O rings are square? Really your manifold has a circle grove in it for the gaskets and the stock TB's use O circle gaskets Why would yours be square?

I even went back an looks at kit and the mani had circle grooves?

ANMVQ · 07-03-2014, 02:27 PM

This can speak for itself, :/,, UM Square EH?

thompsontechs · 07-03-2014, 02:29 PM

Quote:

Originally Posted by whiddles

like how kyle is turning it into a install error war. This thread was to discuss the water cooler letting go, unrelated to throttle bodies. Kyle you want me to post all my communication with you and Josh and where we sent my car to for installs and to correct some errors on your dime? Im not here to bash. Im here to see if this needs to be looked at any further or not.

either way with o rings or not it all was done through stillen now stillen says its installed incorrectly. funny. Kyle okay even to replace your inner cooler core is over $580 and then you did discount it for me but its still to me unfair

I still don't see why the inner cooler would let go from this. IMO that is something that needs to be looked at.

whiddles · 07-03-2014, 02:31 PM

they are ducking tails now it seems?

ANMVQ · 07-03-2014, 02:31 PM

It is, I think that is his whole point, BTW Whiddles I don't remember were you still run "their ridiculous IMO" heat exchanger? Or did you follow me and upgrade it to take it off the radiator?

whiddles · 07-03-2014, 02:34 PM

I ran it as it was installed via they're installer never modded

whiddles · 07-03-2014, 02:36 PM

I put 18k on it maybe in 4 years never really did much after the SC

ANMVQ · 07-03-2014, 02:37 PM

I would bet that's why, I'm not a engineer but to have a heat exchanger bolted to the radiator didn't seem like the best why to run that. Between the radiator getting hot , the trans cooler( If auto) and the heat exchanger being hot , How the hell can the fluid be cool? That was my first mod to the system, Didn't understand it from day one? No there's a handful of guys running the upgraded one

whiddles · 07-03-2014, 02:42 PM

well if i stay with this kit ill look at the upgrade. can you send me a link?

ANMVQ · 07-03-2014, 02:45 PM

Sure here man, If I go back to their kit first thing I'd buy again I wont even install their kit with theirs.

Air to Water Heat Exchanger

Kyle@STILLEN · 07-03-2014, 02:55 PM

Quote:

Originally Posted by ANMVQ

This can speak for itself, :/,, UM Square EH?

I really don't mean to be rude here or anything but you are posting information that is only going to be misleading the conversation and confusing people.

An O ring is in reference to the general shape of the gasket. The gasket is round...in the shape of an O...O rings can come in various finishes where the actual shape will vary. Sometimes the O ring is round:
O ring.jpg

Other times the O ring has shoulders which make it square:
sqrrn.jpg

A google images showed some different styles of O rings:
o-ring.jpg

Just like there can be such thing as a V6 or an inline 6. A V6 uses a V shaped block and inline 6 puts all the cylinders in a straight line.

ANMVQ · 07-03-2014, 03:00 PM

Hey Kyle you and I have travelled this road before so well just agree to disagree , But misleading is saying this "The O rings included in the supercharger kit are square, not round" and not the fact that I posted pictures.

Just sounds like double talk to me. :/

07-03-2014, 02:31 PM	#2603 (permalink)
ANMVQ A True Z Fanatic Join Date: Mar 2011 Location: Framingham MA Posts: 2,732 Drives: 2014 Q50 AWD Rep Power: 19	It is, I think that is his whole point, BTW Whiddles I don't remember were you still run "their ridiculous IMO" heat exchanger? Or did you follow me and upgrade it to take it off the radiator? __________________ 14 Q50 AWD, ARK, ECUTEK (SEB), Takda,

07-03-2014, 02:37 PM	#2606 (permalink)
ANMVQ A True Z Fanatic Join Date: Mar 2011 Location: Framingham MA Posts: 2,732 Drives: 2014 Q50 AWD Rep Power: 19	I would bet that's why, I'm not a engineer but to have a heat exchanger bolted to the radiator didn't seem like the best why to run that. Between the radiator getting hot , the trans cooler( If auto) and the heat exchanger being hot , How the hell can the fluid be cool? That was my first mod to the system, Didn't understand it from day one? No there's a handful of guys running the upgraded one __________________ 14 Q50 AWD, ARK, ECUTEK (SEB), Takda,

07-03-2014, 02:45 PM	#2608 (permalink)
ANMVQ A True Z Fanatic Join Date: Mar 2011 Location: Framingham MA Posts: 2,732 Drives: 2014 Q50 AWD Rep Power: 19	Sure here man, If I go back to their kit first thing I'd buy again I wont even install their kit with theirs. Air to Water Heat Exchanger __________________ 14 Q50 AWD, ARK, ECUTEK (SEB), Takda,

07-03-2014, 03:00 PM	#2610 (permalink)
ANMVQ A True Z Fanatic Join Date: Mar 2011 Location: Framingham MA Posts: 2,732 Drives: 2014 Q50 AWD Rep Power: 19	Hey Kyle you and I have travelled this road before so well just agree to disagree , But misleading is saying this "The O rings included in the supercharger kit are square, not round" and not the fact that I posted pictures. Just sounds like double talk to me. :/ __________________ 14 Q50 AWD, ARK, ECUTEK (SEB), Takda,

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GT Motorsports: 370Z Supercharger system development	SAM@GTM	Forced Induction	1396	02-02-2014 10:54 PM
STILLEN 370Z Dual Exhaust System w/pricing	AK370Z	STILLEN	25	01-03-2011 07:49 PM
Preparation for the STILLEN supercharger	Kyle@STILLEN	Forced Induction	1087	03-13-2010 05:59 AM
Stillen Supercharger estimates???	NewYorkJon34	Forced Induction	454	01-22-2010 11:05 PM
Will Stillen Supercharger & G3 intakes Connect?	NewYorkJon34	Forced Induction	23	10-31-2009 12:09 AM

07-03-2014, 12:11 PM	#2597 (permalink)
whiddles Base Member Join Date: Mar 2010 Location: FT HOOD Posts: 219 Drives: G37S AB Rep Power: 15	like how kyle is turning it into a install error war. This thread was to discuss the water cooler letting go, unrelated to throttle bodies. Kyle you want me to post all my communication with you and Josh and where we sent my car to for installs and to correct some errors on your dime? Im not here to bash. Im here to see if this needs to be looked at any further or not. either way with o rings or not it all was done through stillen now stillen says its installed incorrectly. funny. Kyle okay even to replace your inner cooler core is over $580 and then you did discount it for me but its still to me unfair

07-03-2014, 12:30 PM	#2598 (permalink)
whiddles Base Member Join Date: Mar 2010 Location: FT HOOD Posts: 219 Drives: G37S AB Rep Power: 15	Stillen o-ring picture sent to me from Trent mine

07-03-2014, 02:31 PM	#2602 (permalink)
whiddles Base Member Join Date: Mar 2010 Location: FT HOOD Posts: 219 Drives: G37S AB Rep Power: 15	they are ducking tails now it seems?

07-03-2014, 02:34 PM	#2604 (permalink)
whiddles Base Member Join Date: Mar 2010 Location: FT HOOD Posts: 219 Drives: G37S AB Rep Power: 15	I ran it as it was installed via they're installer never modded

07-03-2014, 02:36 PM	#2605 (permalink)
whiddles Base Member Join Date: Mar 2010 Location: FT HOOD Posts: 219 Drives: G37S AB Rep Power: 15	I put 18k on it maybe in 4 years never really did much after the SC

07-03-2014, 02:42 PM	#2607 (permalink)
whiddles Base Member Join Date: Mar 2010 Location: FT HOOD Posts: 219 Drives: G37S AB Rep Power: 15	well if i stay with this kit ill look at the upgrade. can you send me a link?