GTM Performance Engineering 370Z SUPERCHARGER KIT PRESS RELEASE

DarkZide · 10-19-2010, 03:14 PM

Let me know what they say, I'm not that far north of them.

Zsteve · 10-19-2010, 03:52 PM

I need a good installer in Texas as I may get the GTM kit after I come back from NTC and will have a little extra duckies.

theDreamer · 10-19-2010, 03:56 PM

Quote:

Originally Posted by Zsteve

I need a good installer in Texas as I may get the GTM kit after I come back from NTC and will have a little extra duckies.

Is Houston close enough for you?

Zsteve · 10-19-2010, 05:14 PM

Quote:

Originally Posted by theDreamer

Is Houston close enough for you?

Im in el paso so I would have to drive to GTM if I cant find a good one closer. I think Houston is about 10 hrs? Not sure.

theDreamer · 10-19-2010, 07:56 PM

Quote:

Originally Posted by Zsteve

Im in el paso so I would have to drive to GTM if I cant find a good one closer. I think Houston is about 10 hrs? Not sure.

A bit long ways, but would hate to see you go to a closer shop and run into problems.
For where you are I would suggest trailer it to the shop then when complete pick it up and drive home. Trailer fee would probably be around what it would cost to drive it out and such.

DannyGT · 10-19-2010, 04:51 PM

FYI - the new and improved pipe has arrived. I will continue installation this week/weekend. One thing to note off the bat is how much material was actually removed. The pipe is much thinner on the inside as far as the eye can see and its incredibly smooth on the inside.

I'll post up a quick vid later on today

Zsteve · 10-19-2010, 05:29 PM

Quote:

Originally Posted by DannyGT

FYI - the new and improved pipe has arrived. I will continue installation this week/weekend. One thing to note off the bat is how much material was actually removed. The pipe is much thinner on the inside as far as the eye can see and its incredibly smooth on the inside.

I'll post up a quick vid later on today

So is this new pipe part of the kit now? And what was wrong with the original pipe?

RCZ · 10-19-2010, 05:54 PM

Quote:

Originally Posted by Zsteve

So is this new pipe part of the kit now? And what was wrong with the original pipe?

LOL...

DarkZide · 10-19-2010, 06:38 PM

Quote:

Originally Posted by RCZ

LOL...

Seriously man, give it a rest.

370Zsteve · 10-19-2010, 07:01 PM

Quote:

Originally Posted by DarkZide

Seriously man, give it a rest.

Well, he's had to take it in the Stillen thread, so

all's fair in love and war.

DannyGT · 10-19-2010, 07:40 PM

Quote:

Originally Posted by DarkZide

Seriously man, give it a rest.

Not sure he meant it in the way your taking it but none-the-less, I will answer that question...

There is no difference in pipe design. It was just, for lack of better terms, port and polished...They are applying that process to all the current pipes. I'm sure all new ones from here on out will already be casted properly.

Fezzik · 11-01-2010, 02:31 PM

Unless you build your tranny out.

GUTCH · 11-01-2010, 02:39 PM

What does "build my tranny out" mean? Upgrading it essentially?

How much would that cost (ball park)?

Fezzik · 11-01-2010, 02:59 PM

They call it making it bulletproof.
Check this site out 3-4 grand
Infinity
I have heard good and bad things so do research. Some people with cryo treat the syncros too. You can make the tranny indestructible, just takes money and what your willing to do.

GUTCH · 11-02-2010, 02:28 AM

Quote:

Originally Posted by Fezzik

They call it making it bulletproof.
Check this site out 3-4 grand
Infinity
I have heard good and bad things so do research. Some people with cryo treat the syncros too. You can make the tranny indestructible, just takes money and what your willing to do.

Quote:

Originally Posted by G37Sam

May I suggest a PPG Dog Box

Do either of the above make auto trannies as well?

10-19-2010, 03:52 PM	#2 (permalink)
Zsteve A True Z Fanatic Join Date: Sep 2009 Location: TX Posts: 3,298 Drives: the 2 balled club Rep Power: 23	I need a good installer in Texas as I may get the GTM kit after I come back from NTC and will have a little extra duckies. __________________ 2010 LS3 C6 Silver coupe corvette

10-19-2010, 04:51 PM	#6 (permalink)
DannyGT Track Member Join Date: Jan 2009 Location: Jersey Posts: 919 Drives: 370Z (SOLD) Rep Power: 281	FYI - the new and improved pipe has arrived. I will continue installation this week/weekend. One thing to note off the bat is how much material was actually removed. The pipe is much thinner on the inside as far as the eye can see and its incredibly smooth on the inside. I'll post up a quick vid later on today __________________ Performance GTM Stage 1 SC, GTM Res.Test Pipes, Invidia Gemini Exhaust, GTM HD Oil Cooler Wheels & Suspension AME Tracer TM02's 19x9.5F 19x10.5R w/ 265x35F & 305x30R, Hotchkis Sways, BC (BR) Racing Coilovers (Car Sold)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Official Press Release Photos: Advan RG-D and Advan RZ-DF Wheels	DriveLineEric	Wheels & Tires	29	10-14-2011 12:36 PM
MXP Performance - S/S Catback Exhaust Press Release	DriveLineEric	Intake/Exhaust	30	05-18-2010 12:09 PM
Nissan 370Z UK Press Release Document - PRICING AND GRADES	AK370Z	Nissan 370Z Owners Manual / Service Manuals	0	02-12-2009 11:55 PM
Nissan Press Release on Pricing on 2009 370Z 12/30/08	Pushing_Tin	Nissan 370Z Pricing / Ordering Discussions	53	01-02-2009 02:32 PM

10-19-2010, 03:14 PM	#1 (permalink)
DarkZide Enthusiast Member Join Date: May 2010 Location: TN Posts: 291 Drives: 2010 370z BC M6 Rep Power: 17	Let me know what they say, I'm not that far north of them.

11-01-2010, 02:31 PM	#12 (permalink)
Fezzik Base Member Join Date: Jun 2010 Location: Chicago Posts: 182 Drives: G37 Vert 6mt White Rep Power: 16	Unless you build your tranny out.

11-01-2010, 02:39 PM	#13 (permalink)
GUTCH Base Member Join Date: Jun 2010 Location: Australia Posts: 138 Drives: 2011 Nissan 370Z Rep Power: 16	What does "build my tranny out" mean? Upgrading it essentially? How much would that cost (ball park)?

11-01-2010, 02:59 PM	#14 (permalink)
Fezzik Base Member Join Date: Jun 2010 Location: Chicago Posts: 182 Drives: G37 Vert 6mt White Rep Power: 16	They call it making it bulletproof. Check this site out 3-4 grand Infinity I have heard good and bad things so do research. Some people with cryo treat the syncros too. You can make the tranny indestructible, just takes money and what your willing to do.