09-23-2021, 07:43 AM
|
#1 (permalink)
|
A True Z Fanatic
Join Date: Jun 2012
Location: Minneapolis
Posts: 2,651
Drives: 06 350Z , 09 370Z MT
Rep Power: 6834
|
Quote:
Originally Posted by NorthStyle
It was more to make a point: How many forms of boost control does a single, street-driven car need, and why use the boost solenoid if you're just going to go and mess with the boost controller after that has already been setup?
|
You would not use both forms. You can only use one solenoid so you would either use that solenoid to be controlled directly from Ecutek/ECU or you would control it from the boost control head unit/gauge.
I may have confused some guys when stating "50 maps". We run the scg-1 in the RnD car and the car was tuned by a good tuner (Eugene) who sets this thing up so that the injectors automatically scale to the psi the MAP sensor is reading. Therefore, you have unlimited boost bandwidth. Meaning I could go from 10 psi up to 20+psi in .5 psi increments and the cars AFR's would be spot on at any given psi/herspers.
Kind of nice if you have it set to 11psi for a daily but drink a lot of coffee one morning and decide you want to drive to work at 13psi instead...lol..
__________________
ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM
|
|
|