Who else on here is on the list for BP’s new twin kit?

BettyZ · 07-11-2021, 09:48 PM

Quote:

Originally Posted by tiller

Let me know if anyone’s close to startup? Iam curious about these turbos.

I still have half a kit and no answer back from Sasha, no turbos and no silicone couplers. Seems like everyone else has all there stuff.

With my BP single turbo kit (COMP Turbo oilless + coolantless, which ate its bearings and destroyed itself after 882 miles) the turbo was the last item to ship. Sasha said that was on purpose, as it stretched the 1 year warranty as long as possible.

Nvrdun · 07-11-2021, 10:15 PM

Quote:

Originally Posted by BettyZ

With my BP single turbo kit (COMP Turbo oilless + coolantless, which ate its bearings and destroyed itself after 882 miles) the turbo was the last item to ship. Sasha said that was on purpose, as it stretched the 1 year warranty as long as possible.

He told me that aswell. Both turbos was assembled and tested on 6/25/21 I received them 7/3/21 from California and I live in upstate NY. My problem is my Driver side bracket is way off. Trying to rig some type of spacers.

Sent from my SM-N950U using Tapatalk

BettyZ · 07-11-2021, 10:58 PM

Quote:

Originally Posted by Nvrdun

He told me that aswell. Both turbos was assembled and tested on 6/25/21 I received them 7/3/21 from California and I live in upstate NY. My problem is my Driver side bracket is way off. Trying to rig some type of spacers.

Sent from my SM-N950U using Tapatalk

Would appreciate some pics to demonstrate the issue.

Nvrdun · 07-12-2021, 09:05 AM

Quote:

Originally Posted by BettyZ

Would appreciate some pics to demonstrate the issue.

Here's a view from the front after trying to squeeze it in. The bottom on the driver side is digging in to the rad support without the oil cooler in place.

Sent from my SM-N950U using Tapatalk

BettyZ · 07-12-2021, 10:20 AM

Quote:

Originally Posted by Nvrdun

Here's a view from the front after trying to squeeze it in. The bottom on the driver side is digging in to the rad support without the oil cooler in place.

Sent from my SM-N950U using Tapatalk

Your best option is to mark off the areas making contact, then use an angle grinder with a cutting wheel and just start cutting. Took BP three tries to send me the right brackets. I still had to do some judicious cutting to make it all fit. Only have two holes on each bracket, cut the bottoms off the brackets and the IC

tiller · 07-12-2021, 05:17 AM

Quote:

Originally Posted by Nvrdun

He told me that aswell. Both turbos was assembled and tested on 6/25/21 I received them 7/3/21 from California and I live in upstate NY. My problem is my Driver side bracket is way off. Trying to rig some type of spacers.

Sent from my SM-N950U using Tapatalk

Still having trouble with the intercooler bracket?

tiller · 07-12-2021, 05:23 AM

Quote:

Originally Posted by BettyZ

With my BP single turbo kit (COMP Turbo oilless + coolantless, which ate its bearings and destroyed itself after 882 miles) the turbo was the last item to ship. Sasha said that was on purpose, as it stretched the 1 year warranty as long as possible.

Ya interested to see how these oilless twins behave. There location on the twin kit hopefully will help, trying to be optimistic.

My cars sitting on the hoist ready to go for about 2 months now. I was hoping To get the silicone couplers at least so I could get a lot of the kit installed but still no luck.

Nvrdun · 07-12-2021, 09:20 AM

Quote:

Originally Posted by tiller

Ya interested to see how these oilless twins behave. There location on the twin kit hopefully will help, trying to be optimistic.

My cars sitting on the hoist ready to go for about 2 months now. I was hoping To get the silicone couplers at least so I could get a lot of the kit installed but still no luck.

Here is the aftermath. Until I can somehow get new brackets. Used a 1 inch spacer on the driver side drilled 3 new holes. Supplied 1.5 inch bolts(extra half inch). Add .25 spacer to the passenger side. The passenger side looks better than driver. Bumper cover clears new mod. I'll start piping tomorrow.

Sent from my SM-N950U using Tapatalk

tiller · 07-12-2021, 06:59 PM

Quote:

Originally Posted by Nvrdun

Here is the aftermath. Until I can somehow get new brackets. Used a 1 inch spacer on the driver side drilled 3 new holes. Supplied 1.5 inch bolts(extra half inch). Add .25 spacer to the passenger side. The passenger side looks better than driver. Bumper cover clears new mod. I'll start piping tomorrow.

Sent from my SM-N950U using Tapatalk

You have To trim those lower Oem plastics tab first for sure, I know I did, I had Tom figure that out on my own cuz Sasha gave zero direction after shipping the kit out.

tiller · 07-12-2021, 07:02 PM

BCEAB314-12CD-4E0A-9A57-511C199EAE72.jpeg

Quote:

Originally Posted by tiller

you have to trim those lower oem plastics tab first for sure, i know i did, i had tom figure that out on my own cuz sasha gave zero direction after shipping the kit out.

tiller · 07-12-2021, 07:08 PM

I have contacted Sasha 2 times lately with no avail on any of my existing parts to complete the kit, when I was asked to pay the final amount for the kit I was not told that it was not complete, and I paid fully. Now iam left waiting with no shipping dates , just was told parts shipped out the 25th of June , we are a long ways past that date, very reminiscent of the service I received during the gtm days. Guess I should have leanred my lesson the first time.

BettyZ · 07-12-2021, 11:28 PM

Quote:

Originally Posted by tiller

I have contacted Sasha 2 times lately with no avail on any of my existing parts to complete the kit, when I was asked to pay the final amount for the kit I was not told that it was not complete, and I paid fully. Now iam left waiting with no shipping dates , just was told parts shipped out the 25th of June , we are a long ways past that date, very reminiscent of the service I received during the gtm days. Guess I should have leanred my lesson the first time.

He's been very unreliable lately. I ordered the single turbo kit in December and he'd go weeks between responses. Try hitting him up on FB?

When my air-cooled comp turbo failed after 882 miles he said he'd cover shipping back to Comp. Asked for my paypal. He never sent funds.

07-12-2021, 07:08 PM	#11 (permalink)
tiller Enthusiast Member Join Date: Feb 2011 Location: ontario Posts: 370 Drives: 09 370z touring Rep Power: 16	I have contacted Sasha 2 times lately with no avail on any of my existing parts to complete the kit, when I was asked to pay the final amount for the kit I was not told that it was not complete, and I paid fully. Now iam left waiting with no shipping dates , just was told parts shipped out the 25th of June , we are a long ways past that date, very reminiscent of the service I received during the gtm days. Guess I should have leanred my lesson the first time. ZontheRocks and BettyZ like this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
ATS twin plate vs Os giken twin disk	Elmo370z	Engine & Drivetrain	54	04-21-2018 06:27 AM
New Twin Turbo build in progress: Another Gamma V3 Twin turbo install	Nyght	Forced Induction	37	08-08-2017 09:27 AM
Which stage of twin-turbo/twin-supercharger kit should I get?	Nuc370z	Forced Induction	13	12-30-2015 07:15 PM
Twin scroll vs twin turbo	SS_Firehawk	Forced Induction	32	04-13-2014 12:02 PM
GTM MHI Twin Turbo vs. Fast Intentions Twin Turbo	isayimandrew	Forced Induction	26	05-29-2013 08:47 PM