Announcing TopgunZ ACE Supercharger Kit!

TopgunZ · 06-22-2020, 09:46 AM

Quote:

Originally Posted by JVerge5363

Wow! You have quite the build going on. Best of Luck with it. Looking forward to seeing your results. I guess I should backtrack a little bit and be a little more specific. Not looking to do any motor work but open to just about anything else. I do have Motordyne ART test pipes and a Berk CBE. I would love to reach around 600hp and 450+ tq. My kit will be coming with the Velocity intake, 1050x injectors and 340lph fuel pump. Would upgrading the injectors or fuel pump make any difference or would that just be overkill? Any input is greatly appreciated. Thanks

You can create more power by upping the boost by creating less restriction at the supercharger inlet. By going to just a turboguard and nothing to filter smaller particles you will see around 16psi. This is going to stress the fuel setup like Redondoaveb said so you need a RFS to compensate all that boost pushing against the injectors.

The great thing about the velocity intake is that you can swap from a filtered setup (525whp) to an unfiltered setup (600whp?) in a couple of minutes. Then just switch maps (5 seconds) depending on what boost level you want to run at given the environmental conditions required for filtering air.

redondoaveb · 06-22-2020, 10:28 AM

Quote:

Originally Posted by TopgunZ

You can create more power by upping the boost by creating less restriction at the supercharger inlet. By going to just a turboguard and nothing to filter smaller particles you will see around 16psi. This is going to stress the fuel setup like Redondoaveb said so you need a RFS to compensate all that boost pushing against the injectors.

The great thing about the velocity intake is that you can swap from a filtered setup (525whp) to an unfiltered setup (600whp?) in a couple of minutes. Then just switch maps (5 seconds) depending on what boost level you want to run at given the environmental conditions required for filtering air.

Oops, when I saw velocity intake, for some stupid reason I was thinking turbo guard and figured he was maxed out intake wise.

JVerge5363 · 06-22-2020, 11:04 AM

Quote:

Originally Posted by TopgunZ

You can create more power by upping the boost by creating less restriction at the supercharger inlet. By going to just a turboguard and nothing to filter smaller particles you will see around 16psi. This is going to stress the fuel setup like Redondoaveb said so you need a RFS to compensate all that boost pushing against the injectors.

The great thing about the velocity intake is that you can swap from a filtered setup (525whp) to an unfiltered setup (600whp?) in a couple of minutes. Then just switch maps (5 seconds) depending on what boost level you want to run at given the environmental conditions required for filtering air.

So does this mean that no pulley change is needed?

redondoaveb · 06-22-2020, 12:32 PM

Quote:

Originally Posted by JVerge5363

So does this mean that no pulley change is needed?

If you switch to the turbo guard screen then you'll probably get to 600whp. If not, then a pulley change will be needed. Either that or switch to e85.

JVerge5363 · 06-22-2020, 08:26 PM

Quote:

Originally Posted by redondoaveb

If you switch to the turbo guard screen then you'll probably get to 600whp. If not, then a pulley change will be needed. Either that or switch to e85.

Thank you for your input!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Topgunz full supercharger kits!!	TopgunZ	Forced Induction	497	02-10-2020 05:23 AM
[FOR SALE] Stillen/Topgunz A2A Supercharger Partout	fork	Parts for sale (Private Classifieds)	18	12-04-2019 06:52 AM
[WTB] Supercharger kit Stillen, TopGunz, etc	NismoJohnG	Parts for sale (Private Classifieds)	5	05-06-2019 09:08 AM
Topgunz a2a and full supercharger cyber sale!	TopgunZ	Drivetrain/Engine	0	11-26-2018 12:38 PM
[FOR SALE] Topgunz a2a and full supercharger sale!	TopgunZ	Parts for sale (Private Classifieds)	0	11-26-2018 12:37 PM