Announcing TopgunZ ACE Supercharger Kit!

TopgunZ · 12-19-2019, 07:56 PM

Quote:

Originally Posted by Dahawkster

What kind of fueling mods does this vehicle have?

He has ID1050x injectors with a walbro 400 and CJM FRS. It is all setup for E85 and the plan was to go Dyno on 93 then swap to E85. Winter here in MN doesn't help.

Senna-F1 · 12-20-2019, 08:36 AM

Quote:

Originally Posted by TopgunZ

He has ID1050x injectors with a walbro 400 and CJM FRS. It is all setup for E85 and the plan was to go Dyno on 93 then swap to E85. Winter here in MN doesn't help.

I have all the same fuel mods as well and am told E85 will put me past the limit of the injectors.

What’s the duty cycle for these injectors on this car?

Also, what’s the fuel pressure set to?

TopgunZ · 12-20-2019, 09:12 AM

Quote:

Originally Posted by Senna-F1

I have all the same fuel mods as well and am told E85 will put me past the limit of the injectors.

What’s the duty cycle for these injectors on this car?

Also, what’s the fuel pressure set to?

FP is set to 45psi.

The injectors were at 60% DC.

DrBacon · 12-23-2019, 10:11 PM

Quote:

Originally Posted by Senna-F1

I have all the same fuel mods as well and am told E85 will put me past the limit of the injectors.

What’s the duty cycle for these injectors on this car?

Also, what’s the fuel pressure set to?

Do you have a return fuel system? Some one should totally correct me if I'm wrong here but I THINK how it works is without one the tuner adds more fuel to compensate since fuel pressure isn't rising with boost.

TopgunZ · 12-20-2019, 09:12 AM

We had very limited time on the dyno that day. We are going to spend more time on the E85 tune as that is what he will drive 99% of the time and only 93 when he has to (road trip). There is still a lot more we can do with the kit.

I am working on getting us back on as soon as possible.

1dirtyz · 12-20-2019, 09:26 AM

Here is my car on the track at Brainerd International Raceway. Looking to take 1st in unlimited class.

bcfromfl · 12-21-2019, 03:24 PM

So...wait. You killed a Viper?????????

LENTZ · 12-23-2019, 02:15 PM

Quote:

Originally Posted by bcfromfl

So...wait. You killed a Viper?????????

I see an ACR Viper, Corvette, and GT-R in the lineup

kinitox · 12-23-2019, 02:17 PM

Just for clarification, he runs with A2A SC and win the track?

Enviado desde mi CLT-L29 mediante Tapatalk

1dirtyz · 12-23-2019, 09:31 PM

Sorry for the confusion! That win was when I was N/A. I was lined up with the unlimited class to make up a run since someone crashed in front of me. I will be tracking with the SC kit once spring is around.

Janjua8 · 01-02-2020, 02:24 AM

Quote:

Originally Posted by 1dirtyz

Sorry for the confusion! That win was when I was N/A. I was lined up with the unlimited class to make up a run since someone crashed in front of me. I will be tracking with the SC kit once spring is around.

Is your block built? Or stock block and you'll track it like that?

Sent from my SM-N975U using Tapatalk

TopgunZ · 01-02-2020, 06:53 AM

Quote:

Originally Posted by Janjua8

Is your block built? Or stock block and you'll track it like that?

Sent from my SM-N975U using Tapatalk

Ill need to answer this for him. He just left for a 15 day trip to propose to his gf. He has a 100% stock block.

DrBacon · 01-07-2020, 02:50 AM

Any rough estimations on when the intake will be able to be separately purchasable? I have to take out the supercharger as I discovered I have an AC line bracket that is rubbing against the bottom of the supercharger and making noise (which I suspect MIGHT be related to my knock sensor false positive issues, I hope...), figured it would be best to wait on the intake before going through all that effort twice.

Dentt42 · 01-07-2020, 09:04 AM

Quote:

Originally Posted by cgr406

Many of us running Aaron's first kit use the Fast Intentions crash bar in lieu of the factory one. https://www.fastintentions.com/produ...roducts_id/177 I guess I don't really know if this will fit w/ the newer, larger intercooler, but it may be an option.

^^This one is big for me, at least in the aspect of keeping some sort of bar. Even though I live in FL where they leave you be as long as nothing is falling off (and even then, usually still do

), I wouldn’t want to reduce protection to all the expensive components on the front of the car.

Any rough ideas for getting this kit on a G37? It pretty much checks all my boxes, and I LOVE the true-dual intake.

TopgunZ · 01-07-2020, 09:54 AM

Quote:

Originally Posted by DrBacon

Any rough estimations on when the intake will be able to be separately purchasable? I have to take out the supercharger as I discovered I have an AC line bracket that is rubbing against the bottom of the supercharger and making noise (which I suspect MIGHT be related to my knock sensor false positive issues, I hope...), figured it would be best to wait on the intake before going through all that effort twice.

This is the slowest part of getting the kits rolling out. This is cast aluminum. We are working on the best way to MFG this in volume. In the mean time we are creating these like we did before, but it is difficult. I plan to have a few of them ready late January, with a fleet in February.

Quote:

Originally Posted by Dentt42

^^This one is big for me, at least in the aspect of keeping some sort of bar. Even though I live in FL where they leave you be as long as nothing is falling off (and even then, usually still do

), I wouldn’t want to reduce protection to all the expensive components on the front of the car.

Any rough ideas for getting this kit on a G37? It pretty much checks all my boxes, and I LOVE the true-dual intake.

The tube bender showed up today! So we will begin production on the front bash bar for these kits.

Is your G a Coupe or Sedan? It will fit a Coupe. The sedan is sitting in my garage for fitment and adjustments once kits for the Z roll out.

12-20-2019, 09:12 AM	#5 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6835	We had very limited time on the dyno that day. We are going to spend more time on the E85 tune as that is what he will drive 99% of the time and only 93 when he has to (road trip). There is still a lot more we can do with the kit. I am working on getting us back on as soon as possible. BOLIO 671 likes this. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

12-20-2019, 09:26 AM	#6 (permalink)
1dirtyz Base Member Join Date: Sep 2014 Location: Minnesota Posts: 54 Drives: 2013 370Z Nismo Rep Power: 12	Here is my car on the track at Brainerd International Raceway. Looking to take 1st in unlimited class. BOLIO 671, BlackZeda, DarkJak and 6 others like this.

12-21-2019, 03:24 PM	#7 (permalink)
bcfromfl Enthusiast Member Join Date: Nov 2016 Location: Youngstown, FL Posts: 256 Drives: 2015 PW Nismo 6MT Rep Power: 10	So...wait. You killed a Viper????????? Dahawkster likes this. __________________ Michelin PS4S 275/35F, 305/30R /// Exhaust: Motordyne ART Pipes, Garageline X and Mid-Pipe Combo /// Clutch: ZSpeed EZ-Street Stage II, RJM HD Master Cylinder

12-23-2019, 02:17 PM	#9 (permalink)
kinitox Base Member Join Date: Jan 2015 Location: Dominican Republic Posts: 52 Drives: 370z Basic auto 2009 Rep Power: 12	Just for clarification, he runs with A2A SC and win the track? Enviado desde mi CLT-L29 mediante Tapatalk The Dreamer likes this.

12-23-2019, 09:31 PM	#10 (permalink)
1dirtyz Base Member Join Date: Sep 2014 Location: Minnesota Posts: 54 Drives: 2013 370Z Nismo Rep Power: 12	Sorry for the confusion! That win was when I was N/A. I was lined up with the unlimited class to make up a run since someone crashed in front of me. I will be tracking with the SC kit once spring is around. redondoaveb likes this.

01-07-2020, 02:50 AM	#13 (permalink)
DrBacon Enthusiast Member Join Date: Nov 2016 Location: Washington Posts: 286 Drives: 2014 Nismo Rep Power: 27366	Any rough estimations on when the intake will be able to be separately purchasable? I have to take out the supercharger as I discovered I have an AC line bracket that is rubbing against the bottom of the supercharger and making noise (which I suspect MIGHT be related to my knock sensor false positive issues, I hope...), figured it would be best to wait on the intake before going through all that effort twice. wideglideleon likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Topgunz full supercharger kits!!	TopgunZ	Forced Induction	497	02-10-2020 05:23 AM
[FOR SALE] Stillen/Topgunz A2A Supercharger Partout	fork	Parts for sale (Private Classifieds)	18	12-04-2019 06:52 AM
[WTB] Supercharger kit Stillen, TopGunz, etc	NismoJohnG	Parts for sale (Private Classifieds)	5	05-06-2019 09:08 AM
Topgunz a2a and full supercharger cyber sale!	TopgunZ	Drivetrain/Engine	0	11-26-2018 12:38 PM
[FOR SALE] Topgunz a2a and full supercharger sale!	TopgunZ	Parts for sale (Private Classifieds)	0	11-26-2018 12:37 PM