A few issues with my Stillen supercharger

Bikeracer1098 · 05-12-2018, 11:14 AM

Quote:

Originally Posted by TBatt

They look very similar but the wire gauge is larger for the gen 2 cables. The problem with the earlier ones was an intermittent connection. Very hard to test with a multi-meter.

One other thing, the SC system just starts making boost at around 3K rpm, so below that it is a NA engine.

You need to let the engine warm up before you flog it. The oil will be thick and the oil pressure will be extremely high if you rev it hard while cool. I always get the oil temp up to at least 140 before I start to have some fun. Your engine will thank you.

Comming from a background of racing Bikes I have OCD with warning up engines properly.

My std 2018 370 Nismo feels far more torquy between 2000-3000RPM than my 2016 Supercharged Nismo.

Recently had the car stutter at around 2200RPM during the first 4 miles or so of a journey also stalled twice but hasn’t done so since. On startup the revs have also bounced up to around 2300RPM a few times.

Will post up a video showing the car accelerating on a hot engine from 2000-7000RPM. Car seems to accelerate slower between 2200-3700RPM as if it’s restricted.

Is this the symptoms of faulty extension MAF cables?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
How many have you have had issues from a turbo/supercharger?	Zatanna Z	Forced Induction	27	04-16-2017 06:49 AM
Supercharger pulley/shaft "issues"	ChaseZ	Forced Induction	21	03-11-2017 07:45 PM
WTB stillen Supercharger or GTM Supercharger STG 2	ej z34	Wanted	2	11-23-2016 03:57 AM
Stillen Supercharger post-install issues	WillVHR	Forced Induction	6	01-29-2016 07:49 PM
Stillen Supercharger help!	Lowlife13	Engine & Drivetrain	3	11-06-2013 10:15 PM