Fast Intentions Stage 2 TT build by MA-Motorsports.

Spooler · 11-24-2021, 11:20 AM

Quote:

Originally Posted by redondoaveb

What's the difference between the 61.64's and the 65.64's?

61.64, the Seb turbo's? I am not sure. they are custom ones he spec'd out. Compressor is the same as mine. He changed the trim on the turbine side. Looks like he has the larger turbine wheel. The compressor starts running out of the efficiency range at 25psi of boost. IAT's start to climb.

Spooler · 11-24-2021, 11:26 AM

My turbine wheel ran out at 29psi of boost at 10:1. 28psi was 996whp and 29psi was only 1004whp. The turbine became a restriction.

Spooler · 11-24-2021, 11:39 AM

That is the crazy part about all this. Learning what does what can only be done by testing.

redondoaveb · 11-24-2021, 12:39 PM

Quote:

Originally Posted by Spooler

That is the crazy part about all this. Learning what does what can only be done by testing.

Wouldn't Tial have an idea what turbo's would be best for your application?

Spooler · 11-24-2021, 01:31 PM

Quote:

Originally Posted by redondoaveb

Wouldn't Tial have an idea what turbo's would be best for your application?

Not a bunch of data on a VQ37VHR twin turbo. The data I have shows me where I need to go. Where those turbos will run out I do not know until we test it.

redondoaveb · 11-24-2021, 01:49 PM

Quote:

Originally Posted by Spooler

Not a bunch of data on a VQ37VHR twin turbo. The data I have shows me where I need to go. Where those turbos will run out I do not know until we test it.

FWIW, Tial technical support is top notch. They were working intently with me on my bov flutter issue. Couldn't ask for a better company to work with.

Spooler · 11-24-2021, 04:18 PM

Quote:

Originally Posted by redondoaveb

FWIW, Tial technical support is top notch. They were working intently with me on my bov flutter issue. Couldn't ask for a better company to work with.

My choices are limited with the Fast Intention cast manifolds. The right thing to do would be to have a set of custom tubular exhaust manifolds made and put in a pair of G35-900. Unfortunately, money will limit what I do. I do not have an unlimited budget.

redondoaveb · 11-24-2021, 04:45 PM

Quote:

Originally Posted by Spooler

My choices are limited with the Fast Intention cast manifolds. The right thing to do would be to have a set of custom tubular exhaust manifolds made and put in a pair of G35-900. Unfortunately, money will limit what I do. I do not have an unlimited budget.

At your power level you almost need an unlimited budget

Spooler · 11-24-2021, 05:42 PM

Quote:

Originally Posted by redondoaveb

At your power level you almost need an unlimited budget

It would make things go faster, that is for sure. I am making do, it just takes longer.

Mr.Squeeze · 11-24-2021, 07:46 PM

Quote:

Originally Posted by Spooler

Cause I keep going in circles until I think about it enough. I just looked at a Carbon Z post on Instagram. Looks like the response is good. Like I have said, I am very picky when it comes to turbos.

The Video that he posted a month ago where he's doing part throttle and hits 16 psi of boost ?

Sent from my SM-G986U using Tapatalk

Spooler · 11-24-2021, 07:59 PM

Quote:

Originally Posted by Mr.Squeeze

The Video that he posted a month ago where he's doing part throttle and hits 16 psi of boost ?

Sent from my SM-G986U using Tapatalk

Yup

Mr.Squeeze · 11-24-2021, 09:54 PM

Quote:

Originally Posted by Spooler

My choices are limited with the Fast Intention cast manifolds. The right thing to do would be to have a set of custom tubular exhaust manifolds made and put in a pair of G35-900. Unfortunately, money will limit what I do. I do not have an unlimited budget.

AMS uses these on there Alpha 15 kits with huge 4inch intakes and 3.5 inch down pipes. Doing something like that in Z for sure would be all custom would be a bad*** setup though

Sent from my SM-G986U using Tapatalk

Spooler · 11-26-2021, 04:53 PM

Well, I have driven it twice since the last O2 code. No issues. As long as I get the cylinder temps up, all is well. It does have something to do with the fuel I am running since I do not run pump E85. Vince warned me of it when he tuned the car. He said to look out for a little stumble until I get the cylinder temps up. The only time I get an O2 code is when i putt around.

Spooler · 11-29-2021, 07:59 AM

Down to my last barrel of E90. About time to order some more. LOL Thank goodness I don't have to put my car away like you folks do up north. I would be miserable. Nick's startup map works like a champ. Starts first try.

Wuero370z · 11-30-2021, 12:15 PM

Carbon z posted his car for sale with his turbo specs listed

Sent from my iPhone using Tapatalk

11-24-2021, 11:26 AM	#4877 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 14,107 Drives: 2013 Nismo 370z Rep Power: 2684394	My turbine wheel ran out at 29psi of boost at 10:1. 28psi was 996whp and 29psi was only 1004whp. The turbine became a restriction. redondoaveb likes this.

11-24-2021, 11:39 AM	#4878 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 14,107 Drives: 2013 Nismo 370z Rep Power: 2684394	That is the crazy part about all this. Learning what does what can only be done by testing. redondoaveb likes this.

11-26-2021, 04:53 PM	#4888 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 14,107 Drives: 2013 Nismo 370z Rep Power: 2684394	Well, I have driven it twice since the last O2 code. No issues. As long as I get the cylinder temps up, all is well. It does have something to do with the fuel I am running since I do not run pump E85. Vince warned me of it when he tuned the car. He said to look out for a little stumble until I get the cylinder temps up. The only time I get an O2 code is when i putt around. Hotrodz and johnxxx like this. Last edited by Spooler; 11-26-2021 at 06:08 PM.

11-29-2021, 07:59 AM	#4889 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 14,107 Drives: 2013 Nismo 370z Rep Power: 2684394	Down to my last barrel of E90. About time to order some more. LOL Thank goodness I don't have to put my car away like you folks do up north. I would be miserable. Nick's startup map works like a champ. Starts first try. JARblue, Hotrodz, jchammond and 2 others like this. Last edited by Spooler; 11-29-2021 at 08:01 AM.

11-30-2021, 12:15 PM	#4890 (permalink)
Wuero370z Enthusiast Member Join Date: Nov 2018 Location: Albuquerque Posts: 358 Drives: 2013 Nissan 370z Rep Power: 6717	Carbon z posted his car for sale with his turbo specs listed Sent from my iPhone using Tapatalk Hotrodz likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] Fast Intentions Stage 2 Twin Turbo Kit	Nik@SOHO	Parts for sale (Private Classifieds)	60	10-09-2017 08:11 AM
370Z For Sale 2015 Nismo Tech with Fast Intentions Stage 2 637HP	DPE G	370Z For Sale	2	06-03-2017 11:40 AM
MA Motorsports: FAST Intentions \| HKS \| APEXi \| TANABE	MAMotorsports	Exhaust/Intake	46	05-23-2016 11:12 AM
My 09 NISMO Fast Intentions TT Build	katjmmx	Forced Induction	142	05-19-2016 02:32 PM
[FOR SALE] Fast Intentions Exhaust Build #952 Placement	NismoZ70	Parts for sale (Private Classifieds)	11	03-19-2014 09:27 AM