Nissan 370Z Forum

Nissan 370Z Forum (http://www.the370z.com/)
-   Forced Induction (http://www.the370z.com/forced-induction/)
-   -   Fast Intentions Stage 2 TT build by MA-Motorsports. (http://www.the370z.com/forced-induction/126104-fast-intentions-stage-2-tt-build-ma-motorsports.html)

Rusty 04-30-2019 08:30 PM

Quote:

Originally Posted by Spooler (Post 3847994)
Houston, we have a problem. The tuning was going well last Friday at 10-11psi of boost. Making in the 550hp range. He then started to turn up the boost and the motor didn't respond. Turned it up 5psi of boost and it only made 5 more hp. So, Carl stopped and pulled the car off the dyno. They will be doing a bunch of double checks on the timing today. I hope they find the issue. Building and modifying cars is not always peaches and creme. SNAFU, it is my car. This is par for the coarse. I may not make it to Zdayz with it. No worries, plan B will be implemented. Not real happy at the moment but sheit happens.

Wish you had better news to report. :(. Hopefully it's something simple. :tup:

Spooler 04-30-2019 09:47 PM

Quote:

Originally Posted by Rusty (Post 3848273)
Wish you had better news to report. :(. Hopefully it's something simple. :tup:

I have no idea. I didn't message or call them today. Will do the same tomorrow, etc. I am going to Zdayz and have fun. Call me when it's fixed. I need a vacation. Only question I have for them is this, "Do you need a match"....

URBiN~HURMiT 04-30-2019 10:17 PM

Quote:

Originally Posted by Spooler (Post 3847994)
Houston, we have a problem. The tuning was going well last Friday at 10-11psi of boost. Making in the 550hp range. He then started to turn up the boost and the motor didn't respond. Turned it up 5psi of boost and it only made 5 more hp. So, Carl stopped and pulled the car off the dyno. They will be doing a bunch of double checks on the timing today. I hope they find the issue. Building and modifying cars is not always peaches and creme. SNAFU, it is my car. This is par for the coarse. I may not make it to Zdayz with it. No worries, plan B will be implemented. Not real happy at the moment but sheit happens.

Mine made about 500 whp (don't have the exact number) on 11 ~ 13 lbs of boost on pump gas with the Borg Warner 71/63's
Again, sorry I don't have the exact numbers - Daelen had relayed this info to me from his recollection of a conversation with Carl when he was doing the pump gas Tune.

Daelen also told me that they stop increasing the boost when it makes less than 10 whp per 1 lb of boost increase.

The law of diminishing returns --- no significant performance gain but the risk to the motor significantly increases.

I'm still dialing in the car (and my driving skills) on pump gas before I go E85.

jchammond 05-01-2019 05:35 AM

Quote:

Originally Posted by Spooler (Post 3848302)
I have no idea. I didn't message or call them today. Will do the same tomorrow, etc. I am going to Zdayz and have fun. Call me when it's fixed. I need a vacation. Only question I have for them is this, "Do you need a match"....

What am I gonna do with these XL “Depends” :ugh2:
I can bring them for Russ :icon17:

Rusty 05-01-2019 08:02 AM

Quote:

Originally Posted by jchammond (Post 3848383)
What am I gonna do with these XL “Depends” :ugh2:
I can bring them for Russ :icon17:

They're too big for me. You can save them for later.

JARblue 05-01-2019 08:12 AM

Quote:

Originally Posted by Rusty (Post 3848272)
Best place to dump a dead body is in a hog pen. The hogs will eat everything. :eek:

You'll want to shave excess hair and remove any teeth. They aren't good for the pig's digestive system :twocents:

Rusty 05-01-2019 08:42 AM

Quote:

Originally Posted by JARblue (Post 3848431)
You'll want to shave excess hair and remove any teeth. They aren't good for the pig's digestive system :twocents:

They will eat bone.

Spooler 05-01-2019 09:12 AM

Quote:

Originally Posted by jchammond (Post 3848383)
What am I gonna do with these XL “Depends” :ugh2:
I can bring them for Russ :icon17:

I am sure you will need them for the Vette ride. LOL

JARblue 05-01-2019 09:26 AM

Quote:

Originally Posted by Rusty (Post 3848437)
They will eat bone.

Teeth are not bone... they need to be removed. Trust me :ugh:

Rusty 05-01-2019 04:29 PM

Quote:

Originally Posted by JARblue (Post 3848451)
Teeth are not bone... they need to be removed. Trust me :ugh:

After they go through a wood chipper, who cares. :rofl2:

JARblue 05-01-2019 08:59 PM

I was just clarifying ... if you want your pigs to be able to continue to devour human corpses efficiently then you'll want to shave the excess hair and remove the teeth before feeding them.

If you use a wood chipper, then of course it can handle everything. But you'll still have a lot of leftovers :twocents: And it's messy af. Have you seen Fargo?

Spooler 05-01-2019 10:34 PM

Quote:

Originally Posted by JARblue (Post 3848661)
I was just clarifying ... if you want your pigs to be able to continue to devour human corpses efficiently then you'll want to shave the excess hair and remove the teeth before feeding them.

If you use a wood chipper, then of course it can handle everything. But you'll still have a lot of leftovers :twocents: And it's messy af. Have you seen Fargo?

Enough with the hog posts. LOL I shouldn't have mentioned it to you characters.

Rusty 05-01-2019 10:37 PM

Quote:

Originally Posted by JARblue (Post 3848661)
I was just clarifying ... if you want your pigs to be able to continue to devour human corpses efficiently then you'll want to shave the excess hair and remove the teeth before feeding them.

If you use a wood chipper, then of course it can handle everything. But you'll still have a lot of leftovers :twocents: And it's messy af. Have you seen Fargo?

That's what I had in mind. Only direct the discharge into the hog pen. :eek:

Rusty 05-01-2019 10:37 PM

Quote:

Originally Posted by Spooler (Post 3848689)
Enough with the hog posts. LOL I shouldn't have mentioned it to you characters.

:rofl2:

Spooler 05-02-2019 08:31 AM

Timing chains are good to go. Checking VVEL now.


All times are GMT -5. The time now is 03:03 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2