Whats needed for TT Install?

phunk · 11-19-2016, 03:06 PM

Quote:

Originally Posted by ZOperaMan

This is what alanforn said: "One thing that has occurred twice now is low oil pressure light (on the tach) has briefly lit up, once as I was letting the car cool down after a drive and today as I was braking and turning into my driveway. When the light comes on (second or so at the most) the idle dips briefly with the light almost to the point I think its going to stall." ( Whats needed for TT Install? )

Mine appears to be doing exactly the same thing -- I braked, turned, and just as (or just before) I let out the clutch there was a slight dip in RPM, and light flickered. Only thing I noted is my light isn't on tach, it's on left fuel/temp/info display.

I never see the oil pressure light any time the RPM is over 1000.

Since my pressure was normal when analog gauge connected and RPM's dipped below 600, wouldn't you think it was something with the fitting or pressure switch, and not a serious problem?

Thanks,

--ZOM

I dont think your video matches his description at all to be honest. Your RPM never dipped much if at all, and certainly did not appear to almost stall.

As for if your problem is a serious one... hard to say without knowing the cause. If there is a leak in the oil galley gaskets or a bad oil pump or something, it could certainly be a very serious concern. But if its just the switch, it wouldnt be a big concern other than to replace the switch. I dont see how the fittings would cause it unless they were very very restrictive and not allowing the switch to see the pressure accurately. You may want to confirm that the turbos are being oil restricted to their specification since over oiling the turbos could over tax the oil system and reduce pressure at all times, causing the light to go on at lower pump speeds, possibly.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Carbon fiber amuse install help needed	nomodsjk	Exterior & Interior	114	04-19-2023 10:14 AM
OS Giken LSD - What's needed for install	gomer_110	Engine & Drivetrain	9	05-18-2022 06:51 AM
What is needed other than the components for an install?	AggieDev	Audio & Video	8	05-31-2015 01:27 PM
HFC install ... what a b!tch, tips needed	tonybui	Mid-Atlantic Region	20	12-20-2011 06:56 PM
Springs and Spacers install needed	Z_bro	Brakes & Suspension	4	06-23-2011 09:33 PM