After speaking with sasha we came to the conclusion that I more than likely have the right turbo. However the down pipe flange could have potentially warped during welding. I plan on bringing the downpipe to a shop to have the flange grinded down a bit so that it can fit into the compressor housing.

If any of y'all decide to upgrade your radiators or do a coolant change during your install... Don't forget to tighten all the fittings going to the turbo and heater core lines.... Or you'll have a nice mess to clean up :shakes head:

Finally got that b!tch in there. I ended up borrowing a buddy's angle grinder and just went at it. It took my a few times of going back and forth between the turbo and the grinder. In the end I didn't even get the down pipe to push into the turbo all the way. I used the v band clamp to pull the 2 together.
http://www.the370z.com/members/james...004-212621.jpg

Glad to hear it, and gorgeous photo. Also helps me with my RHD ambitions. :)

Any chance you could take a few more shots of the Air Filter and where it sits in relation to the steering rack? Would be IMMENSELY helpful!

*edit* Attached a photo of mine from way back. Trying to figure out of it'll clear that knuckle without any adjustments */edit*

The knuckle in your pic would definitely obstruct the filter. The solution would be running intake tubing up into the fender or forward into the crowded Bay. I racked my brain after the second filter purchase due to melting. We'll all benefit if you figured that one out. Take pics when you do.https://uploads.tapatalk-cdn.com/201...dd0d987e15.jpg

Sent from my SAMSUNG-SM-G890A using Tapatalk

Someone said you are stopping production and focusing on supercharger kits, is this true? I need a snail in my life.

Yes, someone said he was stopping production, but they did not say he was doing SC kits. He was referring to the RJM SC, and was now interested to see where it went.

[QUOTE=Senna-F1;3698181]Yes, someone said he was stopping production, but they did not say he was doing SC kits. He was referring to the RJM SC, and was now interested to see where it went.[/QUOT

Stopping production in nomore will be made? or one last batch and done? SASHA!!!!!!!!!!!!! i want a kit damnit lol. I have cash in hand

[QUOTE=Elmo370z;3698189]Sasha never said he was stopping. Only that one user did, and Ive never seen anyone else say it. So, for now, I'd wait to hear from Sasha. As you know, last word form Sasha was about 6 kits by end of Sept, which has come and gone w/o taking any orders, so let's just wait to see what Sasha himself says.

[QUOTE=Senna-F1;3698190]I hate those 6 people,:mad:. I been checking this damn thread everyday to put my order in.

[QUOTE=Elmo370z;3698199]Im pretty sure he didn't take any orders. He said he'd let people know, and he hasn't done that yet.

Gentlemen....I AM NOT STOPPING THE PRODUCTION OF VHR KITS!

The DE and HR kits, yes, but NOT VHR (370z kits).

Come January I will have 30 kits ready to go...in the mean time i will be taking a few orders in the next couple of weeks. I have focused a bit more on getting the DE/HR inventory out the door...hence the delay on the VHR kits. I am not comfortable taking a deposit and then have you guys wait 4 months for product delivery.

I think I have replied to all the PM's as well. If not, please resend.

I have ordered a VHR passenger side manifold, and will be working on a heat shield.

Looking for someone to chime in on this potential issue. One of my IC pipes is contacting the steering knuckle. Is this something I definitely need to adjust?

http://www.the370z.com/members/james...003-181651.jpghttp://www.the370z.com/members/james...003-181645.jpg

Whew

You need to clock that pipe. It is not square i the coupler either.

That's the first time I've seen a direct response on possible ETA mate... that's all I was after just so I can manage the time in between whatever it may end up being.

But you're saying 30 kits now, when before it was 6?

He said 30 come January, *plus a few in the next couple weeks*. That’s where those 6, or so, are coming from.

Just thought the 30 may have referred to something else. Just seemed a bit of leap from 6 to 30 lol.

These kits will also be available at a shop near you :) :)

There has been about 5 shops that have contacted me directly and have expressed a great amount of interest for being/obtaining dealer status. That is where the 30 kits come in.

I am interested in being one of those kits coming in few weeks. PM sent! deposit ready

Hahaha. ****, get ready for dem massive markups...

That is a very misleading assumltion. The price will be the same.

I will still be honoring the price in my signature as well.

No offence intended mate. Just poking a bit of fun. I think it's an awesome idea. :tup:

That sounds like alot of work. Sounds like you need to open a shop of your own Sasha. :tiphat:

Oops, double post.

All under controll. :).

and i will buy it :)

Edit: I made enough room
http://www.the370z.com/members/james...005-214548.jpg

Was I supposed to oil my filter? Yours looks like it's been oiled.

I did'nt oil it that's just the way it looks. I have a new one on the shelf in the garage and it looks the same when photographed.

PM sent. I'm extremely interested in this kit. :excited:

Still hoping I can snag one of those as well :)

Any update Sasha? :)

We would all appreciate if Sasha could tell us when those 6 kits are going into production

Be patient

I am working on some kits gentlemen, as well as some other larger volume production runs.

There will be plenty to go around for everybody. Your patience is greatly appreciated.

Great to hear! Ready to jump in on the 1st ready kit

https://uploads.tapatalk-cdn.com/201...27c15e38da.jpg

Hope that’s he right size.

Not sure if that was a typo or just trying to get fb warriors to go away. This is prob where the rumour of no more vhr kits


Sent from my iPhone using Tapatalk

Sasha already cleared that up he's making 30 kits..