Frozenboost: Help!

BOLIO 671 · 01-29-2016, 01:23 AM

Need some help. ..I'm ordering the Frozenboost Heat exchanger below as an upgrade and was told that I would have to buy the fittings and hoses separate. I have the hoses covered and was advised to buy 2 each Brass 90 degree and 2 Each Strait Fittings for the in and out. Simple enough....

[/URL]

so I went to the following link.

Liquid Air Adapter

Please excuse me as this is my weak spot....I got confused on which exact 90 degree and Strait Fittings here I would have to buy as there are so many different sizes. I don't want to end up buying the wrong ones. ...Any guidance from any of u that have done this upgrade is greatly appreciated.

mikey1600 · 01-29-2016, 01:40 AM

I waited until mine arrived and took it to a local shop to get the bits to be 100% safe. I'd advise doing the same.

My drain plug was also getting in the way, so I changed it up for a hex nut so it sat Flush with the core while also being easy enough to get to when I need to drain the fluid.

BOLIO 671 · 01-29-2016, 01:46 AM

That sounds good....Thnx

ANMVQ · 01-29-2016, 06:53 AM

I did the same, the brass fitting you'll be able to find locally. The shop that did mine actually had them on hand

TopgunZ · 01-29-2016, 07:25 AM

I cant see that link. But I have a FrozenBoost Heat Exchanger sitting in my garage that I will not use.

Do you want it? Ill sell for cheap.

EVOHUNTER · 01-29-2016, 08:26 AM

Stillen Supercharger Froozen Boost Intercooler Install

check this out, should help you.

I found my fittings at a local plumbing supply store.

StillenZ84 · 01-29-2016, 03:11 PM

Same here. Found the fittings at a local store and installed everything myself. I cut like an inch off of the bottom drain plug because it stuck down really low without doing any modifications to my crash bar except flipping it unlike what Evo did to his.

itsaclipord · 01-29-2016, 03:29 PM

@ topgunz, I want the frozen boost. How much do you want for it?

TopgunZ · 01-29-2016, 04:09 PM

Just so all Stillen guys know.. The Type 100 heat exchanger is much nicer than that Type 101. I bought the 101 for my 350z and it weighed like 10X more than the one stillen provides. Anyone that has purchased one of these can tell you, its a tank. I don't know how efficient the 101 is but the 100 is much higher quality. Any nice heat exchanger, or radiator, I have seen are always incredibly light. This means they use good aluminum. The 101's seem like they are made in China with the cheapest materials there are.

Type 100
Type 101

BOLIO 671 · 01-29-2016, 07:03 PM

Have any of guys used AN fittings on this?

Wow Tops....that is nice....we're there any fitment issues with the 100?

BOLIO 671 · 01-29-2016, 07:06 PM

Quote:

Originally Posted by EVOHUNTER

Stillen Supercharger Froozen Boost Intercooler Install

check this out, should help you.

I found my fittings at a local plumbing supply store.

Awesome....Rep given

EVOHUNTER · 01-30-2016, 08:25 AM

topz is right, these things weight a ton lol

TopgunZ · 01-30-2016, 09:12 AM

Just noticed I had linked the 101 to the 118, which is what I had. The 101 is even Thicker! That thing must feel like it's made out of concrete! Do the cooling gains outweigh the weight gains even?

01-29-2016, 01:23 AM	#1 (permalink)
BOLIO 671 A True Z Fanatic Join Date: Mar 2010 Location: GUAHAN Posts: 1,198 Drives: To & From then Back Rep Power: 3399	Frozenboost: Help! Need some help. ..I'm ordering the Frozenboost Heat exchanger below as an upgrade and was told that I would have to buy the fittings and hoses separate. I have the hoses covered and was advised to buy 2 each Brass 90 degree and 2 Each Strait Fittings for the in and out. Simple enough.... [/URL] so I went to the following link. Liquid Air Adapter Please excuse me as this is my weak spot....I got confused on which exact 90 degree and Strait Fittings here I would have to buy as there are so many different sizes. I don't want to end up buying the wrong ones. ...Any guidance from any of u that have done this upgrade is greatly appreciated. __________________ 2013 Nismo Z34 / FI TT #091 / IG: @lilzilla_z34

01-29-2016, 01:40 AM	#2 (permalink)
mikey1600 Track Member Join Date: Jul 2010 Location: Brisbane, Australia Posts: 503 Drives: MY11 370z Black Rep Power: 15	I waited until mine arrived and took it to a local shop to get the bits to be 100% safe. I'd advise doing the same. My drain plug was also getting in the way, so I changed it up for a hex nut so it sat Flush with the core while also being easy enough to get to when I need to drain the fluid. BOLIO 671 likes this.

01-29-2016, 01:46 AM	#3 (permalink)
BOLIO 671 A True Z Fanatic Join Date: Mar 2010 Location: GUAHAN Posts: 1,198 Drives: To & From then Back Rep Power: 3399	That sounds good....Thnx __________________ 2013 Nismo Z34 / FI TT #091 / IG: @lilzilla_z34

01-29-2016, 06:53 AM	#4 (permalink)
ANMVQ A True Z Fanatic Join Date: Mar 2011 Location: Framingham MA Posts: 2,732 Drives: 2014 Q50 AWD Rep Power: 19	I did the same, the brass fitting you'll be able to find locally. The shop that did mine actually had them on hand __________________ 14 Q50 AWD, ARK, ECUTEK (SEB), Takda,

01-29-2016, 07:25 AM	#5 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6833	I cant see that link. But I have a FrozenBoost Heat Exchanger sitting in my garage that I will not use. Do you want it? Ill sell for cheap. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

01-29-2016, 08:26 AM	#6 (permalink)
EVOHUNTER Track Member Join Date: Jul 2011 Location: Edmonton, Canada Posts: 681 Drives: BOOSTED3-7-0 Rep Power: 14	Stillen Supercharger Froozen Boost Intercooler Install check this out, should help you. I found my fittings at a local plumbing supply store. BOLIO 671, swiss370Z and JWillis72 like this. __________________ Last edited by EVOHUNTER; 01-29-2016 at 08:33 AM.

01-29-2016, 03:11 PM	#7 (permalink)
StillenZ84 Enthusiast Member Join Date: Oct 2014 Location: OKC, OK Posts: 316 Drives: 2010 370Z 7AT S/C Rep Power: 17	Same here. Found the fittings at a local store and installed everything myself. I cut like an inch off of the bottom drain plug because it stuck down really low without doing any modifications to my crash bar except flipping it unlike what Evo did to his. __________________ AtA SC\|9 lb pulley\|2.85" SC\|3.47" Jack\|E85\|CJM S1-SE\|ID1000s\|Walboro 485\|Zeitronix FF\|Stillen CBE\|AP Racing\|Level 10\|F.I. Flex plate\|Nismo-S tune\|EcuTek RaceRom\|Sebz\|Speed density\|Haltech\|3GsCustoms Dual pod a-pillar\|Carbon Signal GTR gauges\|Fujimura\|Built\| CP Pistons/Carrillo rods\|PortPolishHeads/intakes\|928motorsports IG: evanosteenz34 Last edited by StillenZ84; 01-29-2016 at 03:47 PM.

01-29-2016, 03:29 PM	#8 (permalink)
itsaclipord Base Member Join Date: Feb 2010 Location: la Posts: 32 Drives: 2010 base white 370z Rep Power: 15	@ topgunz, I want the frozen boost. How much do you want for it?

01-29-2016, 04:09 PM	#9 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6833	Just so all Stillen guys know.. The Type 100 heat exchanger is much nicer than that Type 101. I bought the 101 for my 350z and it weighed like 10X more than the one stillen provides. Anyone that has purchased one of these can tell you, its a tank. I don't know how efficient the 101 is but the 100 is much higher quality. Any nice heat exchanger, or radiator, I have seen are always incredibly light. This means they use good aluminum. The 101's seem like they are made in China with the cheapest materials there are. Type 100 Type 101 EVOHUNTER likes this. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM Last edited by TopgunZ; 01-30-2016 at 09:10 AM.

01-29-2016, 07:03 PM	#10 (permalink)
BOLIO 671 A True Z Fanatic Join Date: Mar 2010 Location: GUAHAN Posts: 1,198 Drives: To & From then Back Rep Power: 3399	Have any of guys used AN fittings on this? Wow Tops....that is nice....we're there any fitment issues with the 100? __________________ 2013 Nismo Z34 / FI TT #091 / IG: @lilzilla_z34

01-30-2016, 08:25 AM	#12 (permalink)
EVOHUNTER Track Member Join Date: Jul 2011 Location: Edmonton, Canada Posts: 681 Drives: BOOSTED3-7-0 Rep Power: 14	topz is right, these things weight a ton lol __________________

01-30-2016, 09:12 AM	#13 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6833	Just noticed I had linked the 101 to the 118, which is what I had. The 101 is even Thicker! That thing must feel like it's made out of concrete! Do the cooling gains outweigh the weight gains even? __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Stillen SC + FrozenBoost HE + Oil Cooler?	ART_Auto	Forced Induction	30	11-01-2015 07:32 AM
Stillen SC with Frozenboost: how to make it fit?	dajw	Forced Induction	9	04-10-2015 02:36 PM
[FOR SALE] Frozenboost Air-To-Water Heat Exchanger	diego@vossen	Parts for sale (Private Classifieds)	0	09-25-2014 02:47 PM