BP turbo build/advice

hc_416 · 03-28-2019, 08:55 PM

Well, as for my car i'm still saving up some money. I changing jobs and considering ats v coupe or to fix this. Did anyone test drive one?

hc_416 · 01-19-2020, 04:05 PM

Well I back, going to try to get the bat-mobile back up running. I got engaged and took some trips so... the bat-mobile fell to the wayside. To recap the oil pump went and took out the turbo; it also filled my intake piping with oil. At this point I have the car apart and just received my oil pump from Turbo-Werx. I did have to pay for a new one but they did give me a discount and worked with me, props to them. My next task was to follow the wiring of the pump and see if that played a part in this problem. In the directions I have it says pump wire to add a circuit direct. In my car i have a 80 amp relay fed by a 30 fuse off the battery.This relay has a blue wire that is MIA in the engine bay and the other wires taped off. Is this wired correct or should it just be red to the add a circuit and the black to a grounding source. Also please no, "who installed it, your noob, read more, ect..." Maybe Boosted Performance can chime in?

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Turbo Build	davidson_z34	Forced Induction	33	11-12-2015 07:45 PM
Need Advice on Bottom End Build	604GZ	Engine & Drivetrain	5	04-07-2015 09:09 AM
Single turbo build	jlask370	Forced Induction	13	10-07-2013 12:41 PM
Need advice on stereo build....	mengel	Audio & Video	7	02-08-2011 08:24 AM

03-28-2019, 08:55 PM	#1 (permalink)
hc_416 Enthusiast Member Join Date: Aug 2013 Location: CT Posts: 254 Drives: g37 Rep Power: 13	Well, as for my car i'm still saving up some money. I changing jobs and considering ats v coupe or to fix this. Did anyone test drive one?

01-19-2020, 04:05 PM	#2 (permalink)
hc_416 Enthusiast Member Join Date: Aug 2013 Location: CT Posts: 254 Drives: g37 Rep Power: 13	Well I back, going to try to get the bat-mobile back up running. I got engaged and took some trips so... the bat-mobile fell to the wayside. To recap the oil pump went and took out the turbo; it also filled my intake piping with oil. At this point I have the car apart and just received my oil pump from Turbo-Werx. I did have to pay for a new one but they did give me a discount and worked with me, props to them. My next task was to follow the wiring of the pump and see if that played a part in this problem. In the directions I have it says pump wire to add a circuit direct. In my car i have a 80 amp relay fed by a 30 fuse off the battery.This relay has a blue wire that is MIA in the engine bay and the other wires taped off. Is this wired correct or should it just be red to the add a circuit and the black to a grounding source. Also please no, "who installed it, your noob, read more, ect..." Maybe Boosted Performance can chime in?