BP V 2.0 turbo kits...ROUND 3 place your order now

jwick · 06-09-2016, 11:54 AM

Quote:

Originally Posted by BobbyLight

I was under the impression that you will still fail if you "tune out" the CEL. I thought the machine had to get a reading in order to pass. Was I misinformed? The visual I think I can get around, just unsure how to go about the computer part.

Depends where you live. I'm catless completely and I pass here in Texas. My tuner disabled the CEL and it never comes up.

jax4557 · 06-09-2016, 10:24 PM

I had already put my manifold back on, what options do I have?

I have top of waste gates into a T and then a single hose to battery box and its laying open to atmosphere right now?

I have the compressor nipple ran to battery box and its also open to atmosphere, I will plug this until I put EBC into use.

I have bottom of waste gates into a T that a single hose connects to driver side nipple

I have the BOV on the single tap in the front of the manifold.

I need to connect my greddy proec box near battery into a source?
I need to connect my aem failesafe wideband/boost gauge into a source and this runs all the way back into the cabin to the top of my dash... any ideas on source for it to?

I have assembled and cannot do another tap. I put my profec inline of the driver side niple and was seeing 18 to 21 psi so I parked it until I figure this out...

Thannks in advance,

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Your favorite place to order wire online?	madwi	The Lounge (Off Topic)	11	06-22-2014 10:29 AM
anyone know a place in the GTA that makes CUSTOM body kits?	Z11	Canada	3	07-10-2012 05:53 PM
Can't place order for new Z	texunsam	Nissan 370Z Pricing / Ordering Discussions	9	01-28-2011 06:27 PM
OEM spoiler... best place to order from? Any non-OEM alternatives?	rl in florida	Exterior & Interior	1	12-18-2009 12:23 PM

06-09-2016, 10:24 PM	#2 (permalink)
jax4557 Base Member Join Date: Nov 2014 Location: Jacksonville Posts: 102 Drives: 2014 370z Sport M6 Rep Power: 11	I had already put my manifold back on, what options do I have? I have top of waste gates into a T and then a single hose to battery box and its laying open to atmosphere right now? I have the compressor nipple ran to battery box and its also open to atmosphere, I will plug this until I put EBC into use. I have bottom of waste gates into a T that a single hose connects to driver side nipple I have the BOV on the single tap in the front of the manifold. I need to connect my greddy proec box near battery into a source? I need to connect my aem failesafe wideband/boost gauge into a source and this runs all the way back into the cabin to the top of my dash... any ideas on source for it to? I have assembled and cannot do another tap. I put my profec inline of the driver side niple and was seeing 18 to 21 psi so I parked it until I figure this out... Thannks in advance,