BP V 2.0 turbo kits...ROUND 3 place your order now

TcRocket · 04-18-2016, 02:51 PM

OK what did you guys do here. With rubber around pump I am unable to get filter back on due to the plastic tabs. Cut the tabs or the rubber? Need to get this pump back in.

[IMG]

[/IMG]

TheWeez · 04-18-2016, 03:38 PM

Yea I had two 90 degree couplers that went 2.5 to 2.25

Sent from my iPhone using Tapatalk

YzGyz · 04-18-2016, 03:38 PM

I didn't get that rubber sleeve in my kit so the filter went right back on. I would definitely cut the rubber sleeve off rather than the plastic tabs since you don't even need the sleeve to function.

YzGyz

Boosted Performance · 04-18-2016, 03:53 PM

Emailed you Trent.

You can use the sleeve on the top half of the fuel pump, but as mentioned, it is not a must.

TcRocket · 04-18-2016, 05:22 PM

OK thanks Sasha seems my email isn't working correctly. I also drilled my venturi hole to 3/32 to combat the high idle fuel pressure issue

stefonelee · 04-18-2016, 05:36 PM

This is the last wire on the harness I need to hook up, what did you guys plug this into?

TheWeez · 04-18-2016, 05:48 PM

That's for any gauge you have

Sent from my iPhone using Tapatalk

TcRocket · 04-19-2016, 12:15 AM

Speaking of gauge I have to tie one of mine into the illumination circuit. Basically a control for when lights are on gauge will dim. Anyone know how to tie into this?

jwick · 04-19-2016, 12:21 AM

Quote:

Originally Posted by TcRocket

Speaking of gauge I have to tie one of mine into the illumination circuit. Basically a control for when lights are on gauge will dim. Anyone know how to tie into this?

Don't.

Edit - Can't remember if you tie that wire to the power or negative. One will always make it dim, the other always not. I left mine not dimmed.

TBatt · 04-19-2016, 08:48 AM

You can tap into the dimming circuit on the back of the radio. I think it is the gray wire. Take a look in the DIY section, radio area.

TheWeez · 04-19-2016, 11:09 AM

Didn't have my scg-1 hooked up so we went off wastegate

Sent from my iPhone using Tapatalk

solidus · 04-19-2016, 12:34 PM

Quote:

Originally Posted by TheWeez

Didn't have my scg-1 hooked up so we went off wastegate

Sent from my iPhone using Tapatalk

Is that 492hp on wastegate? Can't read it clearly.

TheWeez · 04-19-2016, 12:36 PM

Yes it is

Sent from my iPhone using Tapatalk

solidus · 04-19-2016, 12:39 PM

Quote:

Originally Posted by TheWeez

Yes it is

Sent from my iPhone using Tapatalk

Wow, I can't wait.

jwick · 04-19-2016, 01:01 PM

Quote:

Originally Posted by TheWeez

Yes it is

Sent from my iPhone using Tapatalk

What spring are you running. I'd be majorly concerned if you made 500whp on the 0.5 bar spring. Unless you're on corn.

04-18-2016, 02:51 PM	#376 (permalink)
TcRocket Base Member Join Date: Sep 2015 Location: Coldwater MI Posts: 165 Drives: 2010 370z Nismo Rep Power: 9	OK what did you guys do here. With rubber around pump I am unable to get filter back on due to the plastic tabs. Cut the tabs or the rubber? Need to get this pump back in. [IMG][/IMG]

04-18-2016, 03:38 PM	#377 (permalink)
TheWeez Base Member Join Date: Oct 2015 Location: Tampa Posts: 246 Drives: 370Z PG 6M ST Rep Power: 23	Yea I had two 90 degree couplers that went 2.5 to 2.25 Sent from my iPhone using Tapatalk __________________ "It's not fast enough" - Edgar J. Hoover

04-18-2016, 03:38 PM	#378 (permalink)
YzGyz A True Z Fanatic Join Date: Jun 2013 Location: Houston Posts: 1,449 Drives: 2010 Nismo Rep Power: 62	I didn't get that rubber sleeve in my kit so the filter went right back on. I would definitely cut the rubber sleeve off rather than the plastic tabs since you don't even need the sleeve to function. YzGyz __________________ http://www.the370z.com/members-370z-...gyzs-turn.html YzGyz

04-18-2016, 03:53 PM	#379 (permalink)
Boosted Performance The370Z.com Sponsor Join Date: Feb 2010 Location: Edmonton, AB Posts: 1,629 Drives: Z's Rep Power: 3382	Emailed you Trent. You can use the sleeve on the top half of the fuel pump, but as mentioned, it is not a must. __________________ 750WHP starting @ $7,500 to the door FOR DETAILS VISIT: http://www.the370z.com/members/boosted-performance.html FB: https://www.facebook.com/Boosted-Per...6303179791462/ IG @boostedperformanceyeg

04-18-2016, 05:48 PM	#382 (permalink)
TheWeez Base Member Join Date: Oct 2015 Location: Tampa Posts: 246 Drives: 370Z PG 6M ST Rep Power: 23	That's for any gauge you have Sent from my iPhone using Tapatalk stefonelee likes this. __________________ "It's not fast enough" - Edgar J. Hoover

04-18-2016, 05:22 PM	#380 (permalink)
TcRocket Base Member Join Date: Sep 2015 Location: Coldwater MI Posts: 165 Drives: 2010 370z Nismo Rep Power: 9	OK thanks Sasha seems my email isn't working correctly. I also drilled my venturi hole to 3/32 to combat the high idle fuel pressure issue

04-18-2016, 05:36 PM	#381 (permalink)
stefonelee Base Member Join Date: Jun 2015 Location: Columbus GA Posts: 60 Drives: 11 370z M6 Rep Power: 10	This is the last wire on the harness I need to hook up, what did you guys plug this into?

04-19-2016, 12:15 AM	#383 (permalink)
TcRocket Base Member Join Date: Sep 2015 Location: Coldwater MI Posts: 165 Drives: 2010 370z Nismo Rep Power: 9	Speaking of gauge I have to tie one of mine into the illumination circuit. Basically a control for when lights are on gauge will dim. Anyone know how to tie into this?

04-19-2016, 08:48 AM	#385 (permalink)
TBatt Premium Member Join Date: Apr 2013 Location: Huntsville, AL Posts: 832 Drives: 2019 GT-R Rep Power: 20168	You can tap into the dimming circuit on the back of the radio. I think it is the gray wire. Take a look in the DIY section, radio area. __________________ RJM pedal, Hotchkis Sway Bars, FI TDX, FOG Light, Z1 Slotted Drilled rotors, Stillen SC, Quaife ATB, Z1 Oil cooler, AEM Gauge Set, Galeforce gauge mount, Avant Garde M590 Hypersilver w/RE-11, TopgunZ A2A kit., ECUtek tuned by Seb: ROLL TIDE!

04-19-2016, 11:09 AM	#386 (permalink)
TheWeez Base Member Join Date: Oct 2015 Location: Tampa Posts: 246 Drives: 370Z PG 6M ST Rep Power: 23	Didn't have my scg-1 hooked up so we went off wastegate Sent from my iPhone using Tapatalk EliteXpress likes this. __________________ "It's not fast enough" - Edgar J. Hoover

04-19-2016, 12:36 PM	#388 (permalink)
TheWeez Base Member Join Date: Oct 2015 Location: Tampa Posts: 246 Drives: 370Z PG 6M ST Rep Power: 23	Yes it is Sent from my iPhone using Tapatalk __________________ "It's not fast enough" - Edgar J. Hoover

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Your favorite place to order wire online?	madwi	The Lounge (Off Topic)	11	06-22-2014 10:29 AM
anyone know a place in the GTA that makes CUSTOM body kits?	Z11	Canada	3	07-10-2012 05:53 PM
Can't place order for new Z	texunsam	Nissan 370Z Pricing / Ordering Discussions	9	01-28-2011 06:27 PM
OEM spoiler... best place to order from? Any non-OEM alternatives?	rl in florida	Exterior & Interior	1	12-18-2009 12:23 PM