My kit has arrived! WOOOOOP!

jwick · 01-22-2016, 12:58 PM

Quote:

Originally Posted by TopgunZ

So if you had a V1 or V2 vortech, which are plumbed into oil pan, would you still say superchargers are more maintenance?

No but all the SC kits I've seen for this platform use self contained oil.

squid267 · 01-22-2016, 01:16 PM

Jayhovah, were you able to retain the stock crash bar after Gamma sent you the spacers? Also were there anything else OEM you weren't able to keep like that washer tank?

Jayhovah · 01-22-2016, 01:24 PM

Quote:

Originally Posted by squid267

Jayhovah, were you able to retain the stock crash bar after Gamma sent you the spacers? Also were there anything else OEM you weren't able to keep like that washer tank?

I haven't had any time to work on the car since I returned.

To Do list:
Refit Crash Bar
Swap GTR spark plugs
Go through EVAP hoses/solenoid (have thrown EVAP code twice)
Check all intake manifold/vac connections (wobbly idle)

That's just the 'kit completion' list... The OTHER list goes on and on...
Boost Gauge
Stainless clutch line
RJM Pedal (thinking about it, tony!)
homelink mirror / radar mount
Brainiac
Sub box
etc
etc
ETC

jwick · 01-22-2016, 01:34 PM

Quote:

Originally Posted by Jayhovah

I haven't had any time to work on the car since I returned.

To Do list:
Refit Crash Bar
Swap GTR spark plugs
Go through EVAP hoses/solenoid (have thrown EVAP code twice)
Check all intake manifold/vac connections (wobbly idle)

That's just the 'kit completion' list... The OTHER list goes on and on...
Boost Gauge
Stainless clutch line
RJM Pedal (thinking about it, tony!)
homelink mirror / radar mount
Brainiac
Sub box
etc
etc
ETC

Wobbly idle - Are you still running the post-CAT O2 sensors? Do you have CATs?

Homelink mirror tap - I had to rebuy the tap itself as I broke one of the prongs trying to force it in there. It's a really tight fit. I recommend using a thumb tack as an aid to open up enough space to slide the tap in.

Jayhovah · 01-22-2016, 01:45 PM

Quote:

Originally Posted by jwick

Wobbly idle - Are you still running the post-CAT O2 sensors? Do you have CATs?

Homelink mirror tap - I had to rebuy the tap itself as I broke one of the prongs trying to force it in there. It's a really tight fit. I recommend using a thumb tack as an aid to open up enough space to slide the tap in.

I am running test pipes, but have all the o2 sensors connected. Think this might be affecting the idle?

I think the idle is one of two things:
1) Related to the EVAP leak codes
2) Barb installed on back of intake manifold (I didn't do the worlds greatest job drilling/tapping for this).

I don't quite understand what you are talking about for the homelink mirror tap? Do you mean to tap power for the radar detector? I run a separate circuit for the radar power... I followed this mod:
DIY: Center Console Mounted Radar Detector Mute Button

I pulled all that wiring out of the totaled car, just need to reinstall into the new one.

jwick · 01-22-2016, 01:58 PM

Quote:

Originally Posted by Jayhovah

I am running test pipes, but have all the o2 sensors connected. Think this might be affecting the idle?

I think the idle is one of two things:
1) Related to the EVAP leak codes
2) Barb installed on back of intake manifold (I didn't do the worlds greatest job drilling/tapping for this).

I don't quite understand what you are talking about for the homelink mirror tap? Do you mean to tap power for the radar detector? I run a separate circuit for the radar power... I followed this mod:
DIY: Center Console Mounted Radar Detector Mute Button

I pulled all that wiring out of the totaled car, just need to reinstall into the new one.

My idle always hunted until I pulled the post-CAT O2 sensors completely out of the car. Even though I had the code turned off the ECU must still use them for something. Unplugged them, replaced the sensor with O2 bung plugs and the idle cleared right up.

Never mind. I have this

MirrorTap Radar Detector Power Cords

squid267 · 01-22-2016, 02:02 PM

Quote:

Originally Posted by Jayhovah

I haven't had any time to work on the car since I returned.

To Do list:
Refit Crash Bar
Swap GTR spark plugs
Go through EVAP hoses/solenoid (have thrown EVAP code twice)
Check all intake manifold/vac connections (wobbly idle)

That's just the 'kit completion' list... The OTHER list goes on and on...
Boost Gauge
Stainless clutch line
RJM Pedal (thinking about it, tony!)
homelink mirror / radar mount
Brainiac
Sub box
etc
etc
ETC

Thanks. Also this is insignificant but do you hear the blow off value when you let off the throttle?

Jayhovah · 01-22-2016, 02:04 PM

Quote:

Originally Posted by squid267

Thanks. Also this is insignificant but do you hear the blow off value when you let off the throttle?

F^ck yeah I do. =) It sounds awesome.

Jayhovah · 01-22-2016, 02:05 PM

Quote:

Originally Posted by jwick

My idle always hunted until I pulled the post-CAT O2 sensors completely out of the car. Even though I had the code turned off the ECU must still use them for something. Unplugged them, replaced the sensor with O2 bung plugs and the idle cleared right up.

Great tip and super easy to test! I will check this first =)
Now if only I had time to do anything on the car!

TopgunZ · 01-22-2016, 02:11 PM

That Brainiac system looks dope as hell!! I just voted.

squid267 · 01-22-2016, 02:12 PM

Sorry for all the questions. But you've sparked my interest to do DIY install again. My story is similar to yours. Got a Eclipse GSX in college, swapped engine and it never ran right again, too strapped for cash to do fix things right, sold it and never looked back.

As for my question, what turbo does it use. Gamma website speaks of 16G, 18G and 20G.

Jayhovah · 01-22-2016, 02:25 PM

Quote:

Originally Posted by TopgunZ

That Brainiac system looks dope as hell!! I just voted.

My Brainiac erection has far exceeded 4 hours! I was already gathering parts for a tablet install.. now the Nexus 9 I bought will be going on ebay and the wait for Brainiac begins.

Quote:

Originally Posted by squid267

Sorry for all the questions. But you've sparked my interest to do DIY install again. My story is similar to yours. Got a Eclipse GSX in college, swapped engine and it never ran right again, too strapped for cash to do fix things right, sold it and never looked back.

As for my question, what turbo does it use. Gamma website speaks of 16G, 18G and 20G.

Ask all the questions you want. I wouldn't have gotten anywhere without the support of this forum -- which is why I finally upgraded to premium membership. There are only a couple of us on here with this kit so far (and AFAIK I am the only one that is up and running at the moment), so every question you ask will help someone else's search results in the future.

The gamma website is in dire need of an update. It looks to be a paste of an old GTM parts list from when the V3 kit was supposed to use MHI turbos in it's least expensive form. The MHI turbos have been ditched - my kit came with Garrett GT2860RS turbos (IIRC).

jwick · 01-22-2016, 04:48 PM

Quote:

Originally Posted by Jayhovah

Great tip and super easy to test! I will check this first =)

Now if only I had time to do anything on the car!

My AFR used to hunt too. Pulling the O2 cleared that up too

jwick · 01-22-2016, 04:49 PM

Quote:

Originally Posted by squid267

Thanks. Also this is insignificant but do you hear the blow off value when you let off the throttle?

I hear mine all the time too. The noise I hear the most is turbine spool and the compressor surge as it unloads. Both beautiful!

Jayhovah · 01-22-2016, 05:09 PM

Quote:

Originally Posted by jwick

My AFR used to hunt too. Pulling the O2 cleared that up too

Great! You are on Ecutek too, right?

01-22-2016, 02:11 PM	#250 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6834	That Brainiac system looks dope as hell!! I just voted. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
My new Z arrived.	NS370Z	New 370Z Owner	13	06-23-2012 05:54 PM
It Has Arrived...	Alstann	New 370Z Owner	6	01-14-2012 08:46 PM
My Z has arrived!	Z_ealot	New 370Z Owner	26	08-17-2011 07:43 PM
She arrived!	Gixxer2k4	Introduction	13	12-23-2010 12:51 AM
My Z Has Arrived!	370er	Australia/New Zealand	14	10-01-2009 09:33 PM

01-22-2016, 01:16 PM	#242 (permalink)
squid267 Base Member Join Date: May 2013 Location: Worcester, MA Posts: 207 Drives: 12 Nismo 370Z PW M6 Rep Power: 39	Jayhovah, were you able to retain the stock crash bar after Gamma sent you the spacers? Also were there anything else OEM you weren't able to keep like that washer tank?

01-22-2016, 02:12 PM	#251 (permalink)
squid267 Base Member Join Date: May 2013 Location: Worcester, MA Posts: 207 Drives: 12 Nismo 370Z PW M6 Rep Power: 39	Sorry for all the questions. But you've sparked my interest to do DIY install again. My story is similar to yours. Got a Eclipse GSX in college, swapped engine and it never ran right again, too strapped for cash to do fix things right, sold it and never looked back. As for my question, what turbo does it use. Gamma website speaks of 16G, 18G and 20G.