STS Systems

Jamaica · 12-15-2011, 05:39 PM

We tuned a car yesterday that got 450 whp and 381 lb of torque

blackonorange · 12-15-2011, 05:43 PM

Everything else stock?

Jamaica · 12-15-2011, 05:44 PM

Yup everything else was stock. With meth and a few upgrades over 500whp is achievable

blackonorange · 12-15-2011, 05:46 PM

What psi are you running and give me some details on these upgrades

Jamaica · 12-15-2011, 05:53 PM

Quote:

Originally Posted by blackonorange

What psi are you running and give me some details on these upgrades

pm sent

erkthejerk73 · 12-16-2011, 10:23 AM

Quote:

Originally Posted by tower74

I'm sure if you call them they would be willing to do something for you. At the same time I can't say for sure since I didn't install the kit myself. I know from the web page they say it's an easy install but I know that the guys that installed my cussed a lot. I'm sure it was due to the fact that there was no design form my version of the 370z.

it really doesnt look that hard to do, just like to be prepared before i get into it. Is anyone running the stock clutch and if so how is it holding up?

erkthejerk73 · 12-16-2011, 10:24 AM

Jamaica what type of dyno do you have?

tower74 · 12-16-2011, 05:15 PM

Quote:

Originally Posted by erkthejerk73

it really doesnt look that hard to do, just like to be prepared before i get into it. Is anyone running the stock clutch and if so how is it holding up?

Mine is the AT7 tranny and as long as you keep the VDC off you should be fine. Don't know about the clutch, tho. The only time I use the VDC is when it rains and I also have a boost controller and I drop it to the 5psi setting. Still at 403hp at 5psi it will still get away from you if you gas it. The Nitto tires I have on my car suck in the rain but are hard tires so they seam to grab a little better.
I have got about 2000 miles so far on the turbo.

blackonorange · 12-17-2011, 08:31 PM

I just ordered my setup I got the upgraded turbo as well what gauges are u guys running?

tower74 · 12-18-2011, 05:58 PM

Quote:

Originally Posted by blackonorange

I just ordered my setup I got the upgraded turbo as well what gauges are u guys running?

If I was at home I could tell you but we used the space were the navigation would of gone. Also good idea going with the ball bearing upgrade.
Did you gets your turbo coated? And did you go all out...innercooler, oil cooler, boost controller, etc. My total kit was $7800 plus another $2500 in gauges, labor and the methanol injection. The price can get away from you real quick but it is the best turbo for the money.

Ron · 12-18-2011, 06:06 PM

Quote:

Originally Posted by tower74

If I was at home I could tell you but we used the space were the navigation would of gone. Also good idea going with the ball bearing upgrade.
Did you gets your turbo coated? And did you go all out...innercooler, oil cooler, boost controller, etc. My total kit was $7800 plus another $2500 in gauges, labor and the methanol injection. The price can get away from you real quick but it is the best turbo for the money.

I dunno about that

Jamaica · 12-18-2011, 06:10 PM

Quote:

Originally Posted by Ron

I dunno about that

To each there own. There is only a few kits on the current market. GTM TT kit isnt bad but I prefer the Greddy over the GTM. Greddy has better parts IMO when dealing with both. STS is a good kit. The kit is making more power then Stage 1 SC and Stage 1 TT.

O&G · 12-18-2011, 06:17 PM

If your gunna compare kits make sure they are both running similar boost at the very least. To say one is making more power than the other is ........ So many variables from one build to another. IMO, best not to compare.

Jamaica · 12-18-2011, 06:21 PM

STS kit was on 7psi making 450who 381 torque. This was without meth injection on 91 octane.

We have another car were doing going to have the ball bearing turbo upgrade with meth.
Zach white a forum member also has the same setup. I am waiting to see his results.

O&G · 12-18-2011, 06:24 PM

Dynos, conditions, locations, exhaust diameter, gas, etc....... variables! What kind of dyno was this?

12-18-2011, 06:17 PM	#733 (permalink)
O&G A True Z Fanatic Join Date: Nov 2010 Location: Lone Star State Age: 41 Posts: 1,212 Drives: 40th Anv. Rep Power: 22	If your gunna compare kits make sure they are both running similar boost at the very least. To say one is making more power than the other is ........ So many variables from one build to another. IMO, best not to compare. __________________ O&G's Build/Journal <---(1st lowmount single turbo treeseventy) Built Engine Thread 2011 F-250 Build/Journal

12-18-2011, 06:24 PM	#735 (permalink)
O&G A True Z Fanatic Join Date: Nov 2010 Location: Lone Star State Age: 41 Posts: 1,212 Drives: 40th Anv. Rep Power: 22	Dynos, conditions, locations, exhaust diameter, gas, etc....... variables! What kind of dyno was this? __________________ O&G's Build/Journal <---(1st lowmount single turbo treeseventy) Built Engine Thread 2011 F-250 Build/Journal

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Why are Bose systems hated?	molamann	Audio & Video	156	12-26-2012 05:02 PM
For Sale:Exhaust Systems, Headers & Cats	DavidL	Parts for sale (Private Classifieds)	1	09-15-2009 01:59 PM
timing systems	boosted180	Track / Autocross / Drifting / Dragstrip	0	08-31-2009 03:17 PM

12-15-2011, 05:39 PM	#721 (permalink)
Jamaica A True Z Fanatic Join Date: Mar 2010 Location: SoCal Posts: 15,362 Drives: Under boost Rep Power: 73	We tuned a car yesterday that got 450 whp and 381 lb of torque

12-15-2011, 05:43 PM	#722 (permalink)
blackonorange A True Z Fanatic Join Date: Jul 2011 Location: Saskatchewan Posts: 1,078 Drives: 09 370z Rep Power: 15	Everything else stock?

12-15-2011, 05:44 PM	#723 (permalink)
Jamaica A True Z Fanatic Join Date: Mar 2010 Location: SoCal Posts: 15,362 Drives: Under boost Rep Power: 73	Yup everything else was stock. With meth and a few upgrades over 500whp is achievable

12-15-2011, 05:46 PM	#724 (permalink)
blackonorange A True Z Fanatic Join Date: Jul 2011 Location: Saskatchewan Posts: 1,078 Drives: 09 370z Rep Power: 15	What psi are you running and give me some details on these upgrades

12-16-2011, 10:24 AM	#727 (permalink)
erkthejerk73 Track Member Join Date: Mar 2011 Location: cincinnati Posts: 927 Drives: 13 F150 FX4 eb Rep Power: 15	Jamaica what type of dyno do you have?

12-17-2011, 08:31 PM	#729 (permalink)
blackonorange A True Z Fanatic Join Date: Jul 2011 Location: Saskatchewan Posts: 1,078 Drives: 09 370z Rep Power: 15	I just ordered my setup I got the upgraded turbo as well what gauges are u guys running?

12-18-2011, 06:21 PM	#734 (permalink)
Jamaica A True Z Fanatic Join Date: Mar 2010 Location: SoCal Posts: 15,362 Drives: Under boost Rep Power: 73	STS kit was on 7psi making 450who 381 torque. This was without meth injection on 91 octane. We have another car were doing going to have the ball bearing turbo upgrade with meth. Zach white a forum member also has the same setup. I am waiting to see his results.