STS Systems

Jamaica · 08-25-2011, 05:56 PM

Quote:

Originally Posted by Chinook

I received my best info from Jamaica@UA, service was excellent that's who I'd contact. There aren't many pictures because other than the Nismo on their website, mine was the first done they didn't have the install manual done at the time I picked my car up, they were still putting it together. I did some of my research on the 350 forums as they have been out for a while, might help with the vehicle inspection thing. My car will be up on the hoist tomorrow getting some springs put in I will try to take some more pictures for you under the car.

It was an honest pleasure doing business with you.

Quote:

Originally Posted by atx370z

Just spoke with Uprev... they told me that there shouldn't be a problem passing TX inspection with this kit installed. As soon as i hear back from Jamaica@UA... I most likely will have a kit on the way.

I will be waiting you reply

Whoever get the kit will have free upgrades with the kit provide by STS

Ron · 08-25-2011, 06:07 PM

What brand is the upgraded ball bearing turbo?

Chinook · 08-26-2011, 12:41 AM

Quote:

Originally Posted by atx370z

Where did you have the resonator installed? Did it quiet down the rasp?

I have a big pet peeve with rasp.... that's the only thing im afraid of with this kit.

The resonator was installed on the straight section right at the clamp after the y and it did take out the rasp I will try to get some more pics up for you, I'm going to a meet this Sunday so maybe you will get a couple more opinions on the sound.

atx370z · 08-27-2011, 01:12 AM

Quote:

Originally Posted by Chinook

The resonator was installed on the straight section right at the clamp after the y and it did take out the rasp I will try to get some more pics up for you, I'm going to a meet this Sunday so maybe you will get a couple more opinions on the sound.

Do you have boost controller or are you just running the psi of the wastegate spring?

Is it internal or external wastegate and what psi does it run at without boost controller?

Edit: i think i asked the same question.... whatever, it's late and i'm tired.

atx370z · 08-27-2011, 01:38 AM

Also, you running any gauges? I was thinking at LEAST running boost gauge. Although, i'm going to run an HKS EVC-S which will display boost so i don't really need the gauge.

:\

Mr&Mrs · 09-09-2011, 04:44 PM

Bump for any updates on this kit

blackonorange · 09-10-2011, 09:26 AM

I wanna hear what chinooks sounds like with the resonator

Chinook · 09-10-2011, 10:40 AM

I dont have too much to update at this point, my car was suffering some fuel delivery issues the last couple weeks. There was a clamp that failed on the fuel pump and the hose was slipping off only allowing 25 psi fuel at full throttle. I will say that the customer support from Sts was second to none we were in communication several times a day trying to diagnose it. It started happening shortly after I had the resonator welded on so there was the fear of it being the ecm as the welding shop did not disconnect the battery. Problem is solve and car is driving back to normal I am scheduled in for this thursday to have a dyno tune done as there was a change in elevation of about 2400 feet. I am definatly going to install a fuel pressure gauge after this in addition to the A/F, boost, and oil pressure gauges i am currently running. Now that the resonator is on there it is still relatively loud but not overpowering and you can really hear the turbo since its right at the exhaust tips. It's quite a unique sound and i have had a number of people ask what type of exhaust i was running. I will try to get some audio, I wish i was better with computers but I think a buddy may be able to help me out.

blackonorange · 09-11-2011, 02:50 PM

Awesome man I can't wait to hear it

Mr&Mrs · 09-11-2011, 03:33 PM

The loudness does not bother me its the rice can rasp that im concerned with. Did the resinator get rid of this sound? Anyway you could post pics of where the resinator is? Or some under car shots on a lift? Thanks.

kosstick · 09-11-2011, 05:29 PM

Hmm any chance they might fab this for a g37

Chinook · 09-14-2011, 10:34 PM

Quote:

Originally Posted by kosstick

Hmm any chance they might fab this for a g37

I believe they had someone quite interested but he decided to go another route It's worth calling them on because I think they are quite interested they'd probably need your car to do it but they did an great job with the install.

Jamaica · 09-14-2011, 10:36 PM

G37 thats something we can work on.

Chinook · 09-14-2011, 10:41 PM

Quote:

Originally Posted by Mr&Mrs

The loudness does not bother me its the rice can rasp that im concerned with. Did the resinator get rid of this sound? Anyway you could post pics of where the resinator is? Or some under car shots on a lift? Thanks.

It totally got rid of the "rice can rasp" it was definatly there to begin with and now it's a lot more throaty. It's still fairly loud but it doesn't sound all muffler. and a nice rumble when slowing to a stop. I will try and get video tomorrow when it's on the dyno.

Jamaica · 09-14-2011, 10:45 PM

Quote:

Originally Posted by Chinook

It totally got rid of the "rice can rasp" it was definatly there to begin with and now it's a lot more throaty. It's still fairly loud but it doesn't sound all muffler. and a nice rumble when slowing to a stop. I will try and get video tomorrow when it's on the dyno.

redyno?

08-27-2011, 01:38 AM	#620 (permalink)
atx370z Track Member Join Date: Aug 2010 Location: Austin, TX Posts: 637 Drives: 10 370Z T/S M6 Rep Power: 15	Also, you running any gauges? I was thinking at LEAST running boost gauge. Although, i'm going to run an HKS EVC-S which will display boost so i don't really need the gauge. :\ __________________ Berk HFC & CBE, Stillen G3's, AMS Crank Pulley, JWT Flywheel, 4.08 Gears, UpRev, H&R Springs and 20mm Spacers, JDM Rear Fog, EVO-R Front Lip and CF Upper Cover, 305's

09-09-2011, 04:44 PM	#621 (permalink)
Mr&Mrs A True Z Fanatic Join Date: May 2010 Location: Tampa Posts: 4,195 Drives: RZ34 Rep Power: 25229	Bump for any updates on this kit __________________ Project Z <--Click - Check out the link too many mods to list!

09-10-2011, 10:40 AM	#623 (permalink)
Chinook Premium Member Join Date: Apr 2010 Location: Edmonton Age: 46 Posts: 84 Drives: 09 Nissan 370Z CS M6 Rep Power: 15	I dont have too much to update at this point, my car was suffering some fuel delivery issues the last couple weeks. There was a clamp that failed on the fuel pump and the hose was slipping off only allowing 25 psi fuel at full throttle. I will say that the customer support from Sts was second to none we were in communication several times a day trying to diagnose it. It started happening shortly after I had the resonator welded on so there was the fear of it being the ecm as the welding shop did not disconnect the battery. Problem is solve and car is driving back to normal I am scheduled in for this thursday to have a dyno tune done as there was a change in elevation of about 2400 feet. I am definatly going to install a fuel pressure gauge after this in addition to the A/F, boost, and oil pressure gauges i am currently running. Now that the resonator is on there it is still relatively loud but not overpowering and you can really hear the turbo since its right at the exhaust tips. It's quite a unique sound and i have had a number of people ask what type of exhaust i was running. I will try to get some audio, I wish i was better with computers but I think a buddy may be able to help me out. __________________ 09 Touring/Nav 6MT Carbon Silver STS Turbo

09-11-2011, 03:33 PM	#625 (permalink)
Mr&Mrs A True Z Fanatic Join Date: May 2010 Location: Tampa Posts: 4,195 Drives: RZ34 Rep Power: 25229	The loudness does not bother me its the rice can rasp that im concerned with. Did the resinator get rid of this sound? Anyway you could post pics of where the resinator is? Or some under car shots on a lift? Thanks. __________________ Project Z <--Click - Check out the link too many mods to list!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Why are Bose systems hated?	molamann	Audio & Video	156	12-26-2012 05:02 PM
For Sale:Exhaust Systems, Headers & Cats	DavidL	Parts for sale (Private Classifieds)	1	09-15-2009 01:59 PM
timing systems	boosted180	Track / Autocross / Drifting / Dragstrip	0	08-31-2009 03:17 PM

08-25-2011, 06:07 PM	#617 (permalink)
Ron A True Z Fanatic Join Date: Oct 2010 Location: Houston, TX Posts: 3,009 Drives: TT '11 PW Nismo #113 Rep Power: 21	What brand is the upgraded ball bearing turbo?

09-10-2011, 09:26 AM	#622 (permalink)
blackonorange A True Z Fanatic Join Date: Jul 2011 Location: Saskatchewan Posts: 1,078 Drives: 09 370z Rep Power: 15	I wanna hear what chinooks sounds like with the resonator

09-11-2011, 02:50 PM	#624 (permalink)
blackonorange A True Z Fanatic Join Date: Jul 2011 Location: Saskatchewan Posts: 1,078 Drives: 09 370z Rep Power: 15	Awesome man I can't wait to hear it

09-11-2011, 05:29 PM	#626 (permalink)
kosstick Track Member Join Date: Apr 2011 Location: Los Angles Posts: 668 Drives: G37 Rep Power: 15	Hmm any chance they might fab this for a g37

09-14-2011, 10:36 PM	#628 (permalink)
Jamaica A True Z Fanatic Join Date: Mar 2010 Location: SoCal Posts: 15,362 Drives: Under boost Rep Power: 73	G37 thats something we can work on.