Stillen air to air conversion fabrication thread

[EVOHUNTER]

Originally Posted by batboyvaj

Is there a way to create a system where people can go back to their stock intake manifold and use a dual intake setup similar to your single kit?

No, There is no room to run your driver side pipe up to the TB. The blower takes up all the room on driver side.

[Meulen]

subbed! gotta see if you can make 600 and make the Stillen kit reliable!!

[TopgunZ]

I will be running my charge pipe in the route this kit is going with the filter. So its not a 90* per say but more like a 180.

[G37Some]

love it, this is really cool. The relocation of the MAFs is awesome, I really hope you guys are able to take full advantage of this blower and put out some really good results on a stable reliable tune.

[Boosted Performance]

Originally Posted by G37Some

love it, this is really cool. The relocation of the MAFs is awesome, I really hope you guys are able to take full advantage of this blower and put out some really good results on a stable reliable tune.

I have no doubt that this kit can make some serious power with this configuration. The blower is now the "weak" point (if one can say that) where as before, it was the strongest part of the entire kit.

The only potential issue is belt slip if guys try to push for high boost.

I would also encourage those who go with this upgrade to get a good flowing exhaust. A set of long tube headers will also go a long way. With these modifications the manifold boost pressure would drop, but your volume of air going in to the engine would increase...which is what you really want.

[G37Some]

Originally Posted by Boosted Performance

I have no doubt that this kit can make some serious power with this configuration. The blower is now the "weak" point (if one can say that) where as before, it was the strongest part of the entire kit.

The only potential issue is belt slip if guys try to push for high boost.

I would also encourage those who go with this upgrade to get a good flowing exhaust. A set of long tube headers will also go a long way. With these modifications the manifold boost pressure would drop, but your volume of air going in to the engine would increase...which is what you really want.

I really hope this is the case. i've never liked the kit because many members in the past who had opened up the downpipes/exhaust seemed to get worse power as a result... honestly i thought the blower was probably just a POS and wasn't strong enough to make power without a clogged up exhaust with a lot of back pressure to hold more boost.

i would really enjoy seeing this succeed. i'm sure it would be somewhat 'cheap' to offer an upgrade like this too once this is complete... plumbing, intercooler, wiring for the MAFs? and most importantly labor/know-how... $2,000-2,500 ???

[DEpointfive0]

Originally Posted by G37Some

I really hope this is the case. i've never liked the kit because many members in the past who had opened up the downpipes/exhaust seemed to get worse power as a result... honestly i thought the blower was probably just a POS and wasn't strong enough to make power without a clogged up exhaust with a lot of back pressure to hold more boost.

i would really enjoy seeing this succeed. i'm sure it would be somewhat 'cheap' to offer an upgrade like this too once this is complete... plumbing, intercooler, wiring for the MAFs? and most importantly labor/know-how... $2,000-2,500 ???

I don't recall anyone losing power, just pressure, which is meaningless because you still have more air going through the engine

[G37Some]

Originally Posted by DEpointfive0

I don't recall anyone losing power, just pressure, which is meaningless because you still have more air going through the engine

40th Stillen Supercharger Build

quick 3 second google. i've read this outcome on pretty much any build thread that tried to open up the exhaust.


edit - damn that's a very reasonable price, i would have overpaid by $250-$750 as mentioned above and not asked any questions.

for results

[Boosted Performance]

Well, it is almost 01:00 AM, and the car is done. Just need to start it in the morning...hopefully the car runs on the current map. Will post a few more pictures when I get up in the morning.

[YzGyz]

Originally Posted by Boosted Performance

Well, it is almost 01:00 AM, and the car is done. Just need to start it in the morning...hopefully the car runs on the current map. Will post a few more pictures when I get up in the morning.

I'm starting to think you like sleeping on the couch...

YzGyz

[Seb@SZ]

Originally Posted by Boosted Performance

Well, it is almost 01:00 AM, and the car is done. Just need to start it in the morning...hopefully the car runs on the current map. Will post a few more pictures when I get up in the morning.

Hi Sasha

Pic of MAFs placement?

thanks

[swiss370Z]

I love this Progress

And i'm very

[EVOHUNTER]

I stopped by last night at Sashas house.

The pipe he built going into the TBS is an F'n work of art. Im amazed by his welding/fab skills!

[ANMVQ]

Sasha you're the FRICKEN man BTW. I know you and I talked about this over 2 years ago! My car blew up and you've been busy. I cant wait to see this finished and the numbers it puts down. I may go back on my word and get this kit again and buy you upgrade package

Props man Props!

[Boosted Performance]

Originally Posted by YzGyz

I'm starting to think you like sleeping on the couch...

YzGyz

No, my wife likes money

Originally Posted by Seb@SZ

Hi Sasha

Pic of MAFs placement?

Uploading...will post in about 10 min

thanks

Originally Posted by EVOHUNTER

I stopped by last night at Sashas house.

The pipe he built going into the TBS is an F'n work of art. Im amazed by his welding/fab skills!

Thanks Landon.

Originally Posted by ANMVQ

Sasha you're the FRICKEN man BTW. I know you and I talked about this over 2 years ago! My car blew up and you've been busy. I cant wait to see this finished and the numbers it puts down. I may go back on my word and get this kit again and buy you upgrade package

Props man Props!

Thanks.